Broadsoft supports the following phone books:
Info: Phone book lookup for incoming/outgoing calls is available from software 2.20.5 or higher.
Maxwell 2 and 3 | Maxwell Basic |
---|---|
You can enable / disable the Broadsoft phone books and give them an different name to match your customer requirements.
The Broadsoft phone books can only be used if the XSI service is configured and working.
This functionality is mostly enabled via Broadsoft auto provisioning, see below for the provisioning parameters.
Parameter | Description |
---|---|
Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled | 0 = Disabled 1 = Enabled |
Telephony.PhoneSystem.XSI.PersonalDirectory.Name | Name of the personal Directory |
Telephony.PhoneSystem.XSI.GroupDirectory.Enabled | 0 = Disabled 1 = Enabled |
Telephony.PhoneSystem.XSI.GroupDirectory.Name | Name of the Group Directory |
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled | 0 = Disabled 1 = Enabled |
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Name | Name of the Group Common Directory |
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled | 0 = Disabled 1 = Enabled |
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Name | Name of the Enterprise Directory |
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled | 0 = Disabled 1 = Enabled |
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Name | Name of the Enterprise Common Directory |
Telephony.PhoneSystem.Broadsoft.Lookup.Incoming | 0 = Disabled 1 = Enabled |
Telephony.PhoneSystem.Broadsoft.Lookup.Outgoing | 0 = Disabled 1 = Enabled |
Example: <param name="Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled" value="1"/> <param name="Telephony.PhoneSystem.Broadsoft.Lookup.Incoming" value="1"/> |
The user can via short-press phonebook key ↓, be directed to one phonebook, configured by the administrator or via long-press get the complete list of available phonebooks.
Which phone-books are listed, is dependent on the settings.