- Full Duplex for natural, hands-free communication with high volume
- Modules for implementation of special SIP stations with up to three call buttons
- Built-in switch with downlink function for direct connection of another IP device (e.g. IP camera)
- Memory for pre-recorded audio (e.g. waiting information)
- Control of the 2 relays e.g. as door opener
- Operation without Server possible
- Complies with SIP standard for easy integration in SIP capable PBXes
Main features
SIP module with switch and RJ 45 ports for IP Uplink/Downlink. Ready for connection of up to 3 call buttons, loudspeaker, microphone and LED for call status.
2.5 W Class "D" amplifier; 2 relay outputs (switching contacts); Power supply either external 12 – 24 V AC or 15 – 35 V DC, or via PoE – Power over Ethernet (IEEE 802.3af); SNMP for call station monitoring; Integrated web server for configuration and firmware updates.
Installation behind Tx00 (w/o auto provisioning)
Settings Tx00
- Create a new phone "Standard Sip".
- Set name and password
- apply changes
Settings SIP-ET9089A
- DHCP client is activated by default - if no DHCP server is available fallback settings will be set. IP 192.168.1.200
- use webbrowser for configuration
Home Screen
The home screen is showing an overview of various informations.
e.g. Network settings and sIP information such as "Registration Status".
Network Screen
Changes on the Network settings have to be confirmed by clicking "Apply".
SIP Screen
- set Display Name
- set User: same as set in Tx00 for phone
- set Password: same as set in Tx00 for phone
- set Proxy: IP-address of Tx00
There is the possibility to set up to two Fallback connections!
Changes on the SIP settings have to be confirmed by clicking "Apply".
Phonebook Screen
To establish an outgoing call a phonebook entry has to be added.
- type in a name for the Contact
- type in the caller-id (e.g. 101, in some cases you might have to add @domain to the caller-id)
- assign a call button to the contact
(If an input is activated, it could be choosen for call setup)
A phonebook can be imported as .csv.
Audio Screen
The sensitivity of the audio input (microphone) and the volume of the audio output (loudspeaker) can be adjusted.
Changes on these settings have to be confirmed by clicking "Apply".
Prerecorded audiofiles can be set for different actions on the module.
- Outgoing Call (Button 0) --> playback at local loudspeaker
- Outgoing Call (Button T) --> playback at local loudspeaker
- Outgoing Call (Button X) --> playback at local loudspeaker
- Incoming Call --> playback at local loudspeaker
- Error --> playback at local loudspeaker
- Location Message --> playback (once) at caller/called party
Input Screen
Here you can activate up to three inputs aon the module.
All inputs are using a common GND.
- Standard Input can be configured as
Break
Make - x-Button Module are extension modules
Changes on these settings have to be confirmed by clicking "Apply".
Output Screen
Configure the two onboard outputs as
- Door Opener
- Attendend contact
Changes on these settings have to be confirmed by clicking "Apply".
