IntroductionIf needed, you can start a pcap trace on the system direct from your PC. The trace can be made on the:
Enable SSH accessFirst you need to enable SSH access to the system. Open the web-interface and go to: SETTINGS - System - Web configurator. Enter the Password for the SSH access. ToolsThe trace can be started direct from your PC. Download this zip file that contains all tools and a batch file you can start direct from your laptop and opens a stream from the N870 to wireshark that is installed on your PC.
The device that has the role DECT Manager + Integrator + Base will send the SIP traffic and RTP if the handset is connected to this device. Always remember that the DECT base where the call is started is sending the RTP to the outside world. |
New batch file example:The batch file must sometimes be changed dependent on the windows version or security on your PC. Also which version of plink and whireshark you use can have an influence on the batch file. We can only share information when we adjusted the batch file to solve issues caused by the above. We can not support you solving Windows/security/plink issues. Below is a batch file that is used today by us that works with the N870 software 2.26, latest putty version, Windows 10 and Wireshark 3.0.8
|