By default, the time-out in the PAP2T for seizing the line is set to 10 seconds. That means, when you enter the number in your (analogue) phone/fax and dial-out, the PAP2T-adapter will wait another 10 seconds for additional digits. Normally this is not necessary, because most devices are using block-dialling-mode. Question: PAP2T – How can I configure the timeout before dialling?
For example: - A user has configured a Linksys PAP2T with an analogue telephone behind it. - The user is dialling a number - It takes 10 seconds before the user is hearing the dial tone
Workaround: Use a # behind the dialled number to end the time-out directly. Solution: In the WebUI of the Linksys PAP2T you can change the time-out. Go to Admin-View --> Regional --> Inter-digit Long Timer Change here the settings from 10 seconds to 1 second (or something in between).
Analogue Gigaset DECT phones are using block-dialing, therefore you can use a timeout-setting of 1 second.
|