|
|
|
In the Gigaset PBX go to "Configuration" - "Lines" - "Lines" and click on: New Line
Give the Line an unique name, insert the Registration user name and Password.
In the Provider pull-down list, select "new.."
Just add the telephone numbers for this SIP trunk. The Country Code and Area Code can be filled in, if different than the default setting.
To enable incoming calls, you need to use the settings below.
Open the Manual Configuration and change the default settings like in the example below. Do not forget to enable the check-box Active.
You can copy the text below to paste into the field.
[Telfort-incoming]
exten => _.,1,Set(channelname=Telfort-incoming)
exten => _.,2,Set(lineconfigid=1748)
exten => _.,3,Set(var_to=${SIP_HEADER(To)})
exten => _.,4,Set(firstcut=${CUT(var_to,:,2)})
exten => _.,5,Set(secoundcut=${CUT(firstcut,@,1)})
exten => _.,6,Set(CALLERID(all)=+${CALLERID(number)})
exten => _.,7,Goto(Telfort-incoming-manuell,${secoundcut},1)
[Telfort-incoming-manuell]
exten => _X.,1,Goto(incoming,${secoundcut},1)
exten => _+X.,1,Goto(incoming,${secoundcut},1)
