Software version 109
Parameter Name | Possible Values | WebUI availability | Description |
---|---|---|---|
Network and connections - IP Configuration | |||
BS_IP_Data.ucB_USE_DHCP | 0 => use static-IP; 1 => DHCP-client enabled; | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-IP address type Enable/disable to obtain address from a DHCP server. |
BS_IP_Data.ulI_IP | IPv4 address in hexadecimal format. Example: 192.168.2.2-> 0xC0A80202 192(C0)168(A8)2(02)2(02) | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-IP address Static IP address |
BS_IP_Data.ulI_SUBNET_MASK | IPv4 address in hexadecimal format. Example: 255.255.255.0-> 0xFFFFFF00 255(FF)255(FF)255(FF)0(00) | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Subnet mask Subnet mask |
BS_IP_Data.ulI_DEFAULT_ROUTER | IPv4 address in hexadecimal format. Example: 192.168.2.1-> 0xC0A80201 192(C0)168(A8)2(02)1(01) | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Standard gateway Default Gateway |
BS_IP_Data.ulI_DNS_SERVER_1 | IPv4 address in hexadecimal format. Example: 192.168.2.253-> 0xC0A802FD 192(C0)168(A8)2(02)253(FD) | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Preferred DNS server Preferred DNS server |
BS_IP_Data.ulI_DNS_SERVER_2 | IPv4 address in hexadecimal format. Example: 192.168.2.1-> 0xC0A802FE 192(C0)168(A8)2(02)254(FE) | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Alternate DNS server |
BS_IP_Data.aucS_NETWORK_DEVICENAME | Max. 20 characters; If this field is empty, the product name will be copied into this; | Yes | WebUI: Network and Connections-IP Configuration-Address Assignment for DECT Manager-Device name in network Device Name in the Network |
BS_IP_Data.ucB_HTTP_PROXY_ENABLED | 0 => No; 1 => Yes; | Yes | WebUI: Network and Connections-IP Configuration-HTTP Proxy-Enable proxy server |
BS_IP_Data.aucS_HTTP_PROXY_URL | Max 74 characters; | Yes | WebUI: Network and Connections-IP Configuration-HTTP Proxy-Proxy server address HTTP proxy server address; |
BS_IP_Data.uiI_HTTP_PROXY_PORT | number between 1 and 55000 | Yes | WebUI: Network and Connections-IP Configuration-HTTP Proxy-Proxy server port HTTP proxy server port; |
BS_IP_Data.ucB_VLAN_ENABLED | 0 => No; 1 => Yes; | Yes | WebUI: Network and Connections-IP Configuration-HTTP Proxy-VLAN Tagging-Use VLAN tagging VLAN Tagging enabled; |
BS_IP_Data.uiI_VLAN_ID | Numbers ranging from 0 to 4094 (12-bit values) are permitted | Yes | WebUI: Network and Connections-IP Configuration-HTTP Proxy-VLAN Tagging-VLAN identifier VLAN Identifier |
BS_IP_Data.ucI_VLAN_PRIORITY | Numbers ranging from 0 to 7 (3-bit values) are permitted | Yes | WebUI: Network and Connections-IP Configuration-HTTP Proxy-VLAN Tagging-VLAN priority VLAN Priority |
Network and connections - Security | |||
BS_IP_Data.ucB_AUTO_ACCEPT_CERTIFICATES | 0 => No; 1 => Yes; | WebUI: Network and Connections-Security-Server Authentication-Accept certificates If it's set to 1 then SSL certificates are automatically accepted | |
BS_IP_Data.aucS_HTTP_DIGEST_USERNAME[%] | Max. 50 characters | Yes | WebUI: Network and Connections-Security-Server Authentication-HTTP digest username Usage of non symbolic: <S_PROV_USERNAME class="string" value="broadsoft-username"/> Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_USERNAME |
BS_IP_Data.aucS_HTTP_DIGEST_PASSWORD[%] | Max. 50 characters | Yes | WebUI: Network and Connections-Security-Server Authentication-HTTP digest password Usage of non symbolic: <S_PROV_PASSWORD class="string" value="broadsoft-password"/> Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_PASSWORD |
BS_IP_Data.ucB_ACCEPT_FOREIGN_SUBNET | 0 => No; 1 => Yes; | Yes | WebUI: Network and Connections-Security-Remote Management-Allow access from other networks Allow access to webinterface from other networks; |
BS_IP_Data.ucB_ENABLE_WEB_INTERFACE | 0 => No; | No | Enable (default) or disable web-interface of N720. A restart of the device is needed to use this setting. |
VoIP Providers (index range: 0-9, % - all) | |||
BS_VOIP_Data.astVoipProviders[%].aucSIP_PROVIDER_NAME | Max. 14 characters; | Yes | Provider name; |
BS_VOIP_Data.astVoipProviders[%].aucSIP_DOMAIN | Max. 74 characters; | Yes | Domain; |
BS_VOIP_Data.astVoipProviders[%].aucSIP_SERVER | Max. 74 characters; | Yes | Proxy server address; |
BS_VOIP_Data.astVoipProviders[%].uiSIP_SERVER_PORT | 1-65535 | Yes | Proxy server port; |
BS_VOIP_Data.astVoipProviders[%].aucSIP_REGISTRAR | Max. 74 characters; | Yes | Registration server; |
BS_VOIP_Data.astVoipProviders[%].uiSIP_REGISTRAR_PORT | 1-65535 | Yes | Registration server port; |
BS_VOIP_Data.astVoipProviders[%].uiRE_REGISTRATION_TIMER | Time in seconds; | Yes | Registration refresh time; |
BS_VOIP_Data.astVoipProviders[%].ucSIP_USE_STUN | 0 => No; 1 => Yes; | Yes | STUN enabled; |
BS_VOIP_Data.astVoipProviders[%].aucSTUN_SERVER | Max. 74 characters; | Yes | STUN server address; |
BS_VOIP_Data.astVoipProviders[%].uiSTUN_SERVER_PORT | 1-65535 | Yes | STUN server port; |
BS_VOIP_Data.astVoipProviders[%].uiRE_STUN_TIMER | Time in seconds; | Yes | STUN refresh time; |
BS_VOIP_Data.astVoipProviders[%].uiNAT_REFRESH_TIME | Time in seconds; | Yes | NAT refresh time; |
BS_VOIP_Data.astVoipProviders[%].ucOUTBOUND_PROXY_MODE | 0 => Always; 1 => Automatic; 2 => Never | Yes | Outbound proxy mode; |
BS_VOIP_Data.astVoipProviders[%].aucOUTBOUND_PROXY | Max. 74 characters; | Yes | Outbound proxy server address; |
BS_VOIP_Data.astVoipProviders[%].uiOUTBOUND_PROXY_PORT | 1-65535 | Yes | Outbound proxy port; |
BS_VOIP_Data.astVoipProviders[%].aucI_SIP_TOUT_ICT_B_VAL | Time in milliseconds; | No | Invite-Client-TA-Timeout (default 32000ms); |
BS_VOIP_Data.astVoipProviders[%].aucI_SIP_TOUT_NICT_F_VAL | Time in milliseconds; | No | Non-Invite-Client-TA-Timeout (default 32000ms); |
BS_VOIP_Data.astVoipProviders[%].CLIR_PRIVACY_LEVEL | 0x00 => PRIVACY_NONE; 0x01 => PRIVACY_USER; 0x02 => PRIVACY_NET_HEADER; 0x04 => PRIVACY_NET_SESSION; 0x08 => PRIVACY_NET_USER; 0x10 => PRIVACY_NET_NONE; 0x20 => PRIVACY_NET_CRITICAL; 0x40 => PRIVACY_NET_ID; | No | Kind of CLIR level; |
BS_VOIP_Data.astVoipProviders[%].ucDEREGISTER_ALL_BEFORE_REGISTER | No | De-register all before register; | |
BS_VOIP_Data.astVoipProviders[%].ucSIP_PREFERRED_TRANSPORT_LAYER | integer: 0=automatic; 6=TCP only; 17=UDP only | Yes | What transport layer will be used for SIP; |
BS_VOIP_Data.astVoipProviders[%].aucSH_AUTH_NAME_LABEL[%] | Max. 35 characters; | No | Label in UI for authentication name field; |
BS_VOIP_Data.astVoipProviders[%].aucSH_AUTH_PASS_LABEL[%] | Max. 35 characters; | No | Label in UI for authentication password field; |
BS_VOIP_Data.astVoipProviders[%].aucSH_USER_NAME_LABEL[%] | Max. 35 characters; | No | Label in UI for authentication name field; |
BS_VOIP_Data.astVoipProviders[%].ucHOLD_WITHOUT_RTP_1 | 0 => No; 1 => Yes; | No | Hold should be done without RTP stream; |
BS_VOIP_Data.astVoipProviders[%].SEND_ONLY_WITHOUT_RTP | No | Hold request without RTP will be done with attribute "sendonly" (or "inactive"); | |
BS_VOIP_Data.astVoipProviders[%].PTIME | Value in 10 ms steps; Default: 2 => 20 ms; | No | PTIME for RTP connection; |
BS_VOIP_Data.astVoipProviders[%].ucONESHOT_PROVISIONING_MODE_1 | 0 => normal; 1 => special one shot with 24h check; | No | One shot provisioning mode; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCCBS_ON[%] | Max. 16 characters; | No | Net service code for ringback on busy ON; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCCBS_OFF[%] | Max. 16 characters; | No | Net service code for ringback on busy OFF; |
BS_VOIP_Data.astVoipProviders[%].NetCodeDND_ON[%] | Max. 16 characters; | No | Net service code for Do Not Disturb ON; |
BS_VOIP_Data.astVoipProviders[%].NetCodeDND_OFF[%] | Max. 16 characters; | No | Net service code for Do Not Disturb OFF; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCFU_ON[%] | Max. 16 characters; | No | Net service code for Call Forwarding Unconditional (Automatic) ON; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCFU_OFF[%] | Max. 16 characters; | No | Net service code for Call Forwarding Unconditional (Automatic) OFF; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCFB_ON[%] | Max. 16 characters; | No | Net service code for Call Forwarding on Busy ON; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCFB_OFF[%] | Max. 16 characters; | No | Net service code for Call Forwarding on Busy OFF; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCFNR_ON[%] | Max. 16 characters; | No | Net service code for Call Forwarding on No Reply ON; |
BS_VOIP_Data.astVoipProviders[%].NetCodeCFNR_OFF[%] | Max. 16 characters; | No | Net service code for Call Forwarding on No Reply OFF; |
Mobile devices (index range: 0-99, % - all) | |||
BS_VOIP_Data.astVoipAccounts[%].ucB_SIP_ACCOUNT_IS_ACTIVE_1 | 0 => Account inactive (and not visible); 1 => Account activ; | No | Activate SIP account; |
BS_VOIP_Data.astVoipAccounts[%].aucS_SIP_LOGIN_ID | Max. 74 characters; | Yes | Authentication name; |
BS_VOIP_Data.astVoipAccounts[%].aucS_SIP_PASSWORD | Max. 32 characters; | Yes | Authentication password; |
BS_VOIP_Data.astVoipAccounts[%].aucS_SIP_USER_ID | Max. 32 characters; | Yes | Username; |
BS_VOIP_Data.astVoipAccounts[%].aucS_SIP_DISPLAYNAME | Max. 32 characters; | Yes | Display name; |
BS_VOIP_Data.astVoipAccounts[%].ucVoipProviderIndex | Possible values from 0 to 9 (number of providers - 1); | Yes | Index of the provider, used for this account; |
BS_XML_Netdirs.aucNetdirSelForDirectAccess[%] | Depending on the UI as index the account or device index is used; For the directory-ID values see "directory-ids";0 means no directory selected; | Yes | Selected directory for direct access; |
BS_XML_Netdirs.aucNetdirSelForIntKey[%] | Depending on the UI as index the account or device index is used; For the directory-ID values see "directory-ids";0 means no directory selected; | Yes | Selected directory for INT key; |
BS_XML_Netdirs.aucNetdirSelForAutoLookup[%] | Depending on the UI as index the account or device index is used; For the directory-ID values see "directory-ids";0 means no directory selected; | Yes | Selected directory for auto lookup; |
BS_VOIP_Data.astVoipAccounts[%].aucS_VOIP_NET_AM_NUMBER_1 | Max. 32 characters; | Yes | Network mailbox number or SIP name (URI); |
BS_VOIP_Data.astVoipAccounts[%].ucB_VOIP_NET_AM_ENABLED_1 | 0 => No; 1 => Yes; | Yes | Activate network mailbox; |
BS_VOIP_Data.astVoipAccounts[%].aucI_SIP_PREFERRED_VOCODER | Array with 5 values of: 0x00 => PCMU G.711 µ law, 0x01 => PCMA G.711 a law, 0x02 = G726, 0x03 => G729, 0x04 => G726 AAL2 , 0x05=> G722, 0xff => no codec; The order of the values is important for the preference; | Yes | Preferred codecs for SIP; |
BS_VOIP_Data.astVoipAccounts[%].ucB_CALL_MANAGER_SUPPORT | 0 => Disabled; 1 => Enabled and handset is switched to hands free mode; 2 => Enabled and handset is switched to handset mode; | Yes | Call manager support; |
BS_VOIP_Data.astVoipAccounts[%].ucB_CALL_MANAGER_SERVER_AUTH | 0 => No; 1 => Yes; | No | The SIP server shall be challenged for authentication; |
BS_Email.astEmailAccounts[%].aucEmailUsername | Max. 74 characters; | Yes | User (authentication) name; |
BS_Email.astEmailAccounts[%].aucEmailPassword | Max. 32 characters; | Yes | Authentication password; |
BS_Email.astEmailAccounts[%].aucEmailServer | Max. 74 characters; | Yes | POP3 server URL; |
BS_Email.astEmailAccounts[%].uiPOP3Port | 1-65535;110=default | Yes | POP3 Server port; |
BS_Email.astEmailAccounts[%].bCheckForNewEmails | 0 => No; 1 => Yes; | Yes | Check for new eMail; |
BS_Email.astEmailAccounts[%].ucEmailConnectionType | 0 => No; 1 => Yes; | Yes | Secure connection (SSL); |
BS_VOIP_Data.astVoipAccounts[%].ucB_VOIP_CALLFORWARDING_STATUS | 0 => Off; 1 => On; | No | Device controlled call forwarding status; |
BS_VOIP_Data.astVoipAccounts[%].ucI_VOIP_CALLFORWARDING_WHEN | 0 => All calls;1 => When Busy;2 => No Answer; | No | Device controlled call forwarding mode; |
BS_VOIP_Data.astVoipAccounts[%].aucS_VOIP_CALLFORWARDING_NUMBER | Max. 20 characters; | No | Device controlled call forwarding status; |
BS_VOIP_Data.astVoipAccounts[%].CALLWAITING_STATUS | 0 => Off; 1 => On; | No | Call waiting status; |
BS_VOIP_Data.NameOnIdleDisplay | 0 => User name from account data;1 => Diaplay name from account data; | Yes | Displayed name on idle display; |
BS_Email.uiEmailPollingTime | Time intervall in minutes;0 => no polling at all; | Yes | Email polling time intervall; |
BS_CUSTOM.bit.UseRandomRegistrationPIN | 0 => No; 1 => Yes; | Yes | |
BS_CUSTOM.aucKdsPin[%] | Yes | Define the used defined PIN for handset registration. | |
Telephony - Dialing Plans (index range: 0-29, % - all) | |||
BS_CUSTOM_Dialing.stDialingPlan.PlanRules[%].aucNumber | Nibble coded; F = end;Max. 16 digits (nibbles);Empty number means this rule is not defined; | Yes | Call number; |
BS_CUSTOM_Dialing.stDialingPlan.PlanRules[%].aucComment | Max. 20 characters; | Yes | Comment; |
BS_CUSTOM_Dialing.stDialingPlan.PlanRules[%].bit.bIsActive | 0 => No; 1 => Yes; | Yes | Rule is active; |
BS_CUSTOM.aucAkzVoip | Nibble coded; F = end; Max. 3 digits (nibbles); Example: Code=123, please enter '0x12,0x3f' | Yes | Access code for VoIP lines; |
BS_CUSTOM.ucAkzVoipMode | 0 => None (Off), 1 => For calls from call lists; 2 => For all calls; | Yes | Usage of the access code for VoIP lines; |
Advanced VoIP settings | |||
BS_IP_Data.SystemBehindCelsiusPBX | 0 => No; 1 => Yes; Used e.g. for a different incoming call display; | No | Indicates that system is behind a Celsius PBX; |
BS_VOIP_Data.ucB_DTMF_TX_MODE_AUTO | 0 => No; 1 => Yes; | Yes | Automatic negotiation of DTMF transmission mode; |
BS_VOIP_Data.ucI_DTMF_TX_MODE_BITS | Only used if automatic negotiation = No; Bitmask with bit definitions: 0x01 => audio; 0x02 => RFC 2833; 0x04 => SIP INFO; | Yes | Send settings of DTMF transmission; |
BS_VOIP_Data.EnableWideband | 0 => No; 1 => Yes; | Yes | Enabling wideband calls; |
BS_SC_DspGain.bG729VadEnable | 0 => No; 1 => Yes; | Yes | Enable the voice activ detection (Annex B) for the G729 Codec; |
BS_VOIP_Data.ucB_USE_R_KEY_FOR_CALL_TRANSFER | 0 => No; 1 => Yes; | Yes | Use R-Key to initiate call transfer; |
BS_CUSTOM_ORG.bit.bEct | 0 => No; 1 => Yes; | Yes | Enable call transfer by On-Hook; |
BS_VOIP_Data.ucB_CTO_REFER_TO_AUTOMATIC | 0 => No; 1 => Yes; | Yes | Call transfer: Determine target address automatically; |
BS_VOIP_Data.ucB_CTO_REFER_TO_PREFERRED_CONTACT | 0 => from the SIP URL; 1 => from the SIP contact header; | Yes | Call transfer: Derive Target Address; |
BS_VOIP_Data.ucB_ATTENDED_CALL_TRANS_HOLD_TARGET | 0 => No; 1 => Yes; | Yes | Hold on transfer target for attended call transfer; |
BS_VOIP_Data.ucB_UNATTENDED_CALL_TRANS_HOLD_TARGET | 0 => No; 1 => Yes; | Yes | Hold on transfer target for unattended call transfer; |
BS_VOIP_Data.aucS_HOOK_FLASH_APPL_TYPE[%] | Max. 31 characters; | Yes | Hook Flash (R-key) application type; |
BS_VOIP_Data.aucS_HOOK_FLASH_SIGNAL[%] | Max. 15 characters; | Yes | Hook Flash (R-key) application signal; |
BS_VOIP_Data.ucB_USE_RANDOM_PORT | 0 => No; 1 => Yes; | Yes | Use random ports for SIP; |
BS_VOIP_Data.uiI_SIP_LOCAL_PORT | 1024-49152 | Yes | SIP local port; |
BS_VOIP_Data.uiI_SIP_LOCAL_PORT_MAX | If use random ports for SIP is enabled;1024-49152 | Yes | Max. SIP local port; |
BS_VOIP_Data.uiI_RTP_LOCAL_PORT | Minimum or start value;1024-55000 | Yes | RTP local port; |
Info Services | |||
BS_RAP.astRAPServices[1].ActivateService | 0 => No; 1 => Yes; | Yes | Activate service; |
BS_RAP.astRAPServices[3].ActivateService | 0 => No; 1 => Yes; | Yes | Activate service; |
BS_RAP.astRAPServices[3].ServerURL | Max. 74 characters; | Yes | Server address; |
BS_RAP.astRAPServices[3].Username | Max. 30 characters; | Yes | Username; |
BS_RAP.astRAPServices[3].Password | Max. 64 characters; | Yes | Password; |
BS_RAP.astRAPServices[2].ActivateService | 0 => No; 1 => Yes; | Yes | Activate service; |
BS_RAP.astRAPServices[2].ServerURL | Max. 74 characters; | Yes | Server address; |
BS_RAP.astRAPServices[2].Username | Max. 30 characters; | Yes | Username; |
BS_RAP.astRAPServices[2].Password | Max. 64 characters; | Yes | Password; |
Online Directories | |||
BS_XML_Netdirs.aucAvailableNetdirs[%] | The order of the ID's is used as the order of displaying the directories in the UI; For the directory-ID values see "directory-ids"; | No | Array with all available online directories in the product; |
BS_XML_Netdirs.aucActivatedNetdirs[%] | For the directory-ID values see "directory-ids"; | Yes | Array with all activated online directories; |
BS_IP_Data.ucB_ADD_SIPID_TO_HTTP_REQ | 0 => No; 1 => Yes; | No | turns on/off "SIP USER ID" in XML HTTP GET request |
BS_XML_Netdirs.astNetdirProvider[0].aucProviderName[%] | Max. 20 characters; | Yes | Provider name; |
BS_XML_Netdirs.astNetdirProvider[0].aucServerURL[%] | Max. 74 characters; | Yes | Server address; "?" must be at the end. |
BS_XML_Netdirs.astNetdirProvider[0].aucUsername[%] | Max. 30 characters; | Yes | Authentication name; |
BS_XML_Netdirs.astNetdirProvider[0].aucPassword[%] | Max. 64 characters; | Yes | Authentication password; |
BS_XML_Netdirs.astNetdirProvider[0].aucWhitePagesDirName[%] | Max. 20 characters; | Yes | White pages directory name; |
BS_XML_Netdirs.astNetdirProvider[0].aucYellowPagesDirName[%] | Max. 20 characters; | Yes | Yellow pages directory name; |
BS_XML_Netdirs.astNetdirProvider[0].ucAuthPossibilities | No | Authentication mode; | |
BS_XML_Netdirs.astNetdirProvider[0].aucCountryCode[%] | Max. 2 characters; Strings can be found in iso-3166-1; | No | Country code; |
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bSearchPeopleCap | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bSearchBusinessCap | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bReverseSearchCap | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bAutolookupCap | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bPrivateDirectoryCap | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bPrivateDirectoryNicknameCap | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bSndMacAddress | No | ||
BS_XML_Netdirs.astNetdirProvider[0].bitfldCap.bEncryptPosts | No | ||
BS_XML_Netdirs.astNetdirProvider[1].aucWhitePagesDirName[%] | Max. 20 characters; | Yes | White pages directory name; |
BS_XML_Netdirs.astNetdirProvider[1].aucServerURL[%] | Max. 74 characters; | Yes | Server address; |
BS_XML_Netdirs.astNetdirProvider[1].aucUsername[%] | Max. 30 characters; | Yes | Authentication name; |
BS_XML_Netdirs.astNetdirProvider[1].aucPassword[%] | Max. 64 characters; | Yes | Authentication password; |
BS_XML_Netdirs.astNetdirProvider[1].aucPrivatePagesDirName[%] | Max. 20 characters; | Yes | Private pages directory name; |
BS_XML_Netdirs.astNetdirProvider[1].ucAuthPossibilities | No | Authentication mode; | |
BS_XML_Netdirs.astNetdirProvider[1].aucCountryCode[%] | Max. 2 characters; Strings can be found in iso-3166-1; | No | Country code; |
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bSearchPeopleCap | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bSearchBusinessCap | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bReverseSearchCap | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bAutolookupCap | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bPrivateDirectoryCap | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bPrivateDirectoryNicknameCap | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bSndMacAddress | No | ||
BS_XML_Netdirs.astNetdirProvider[1].bitfldCap.bEncryptPosts | No | ||
BS_LDAP_Netdirs.astNetdirProvider[0].aucDirName[%] | Max. 20 characters; | Yes | Directory name (Display name); |
BS_LDAP_Netdirs.astNetdirProvider[0].aucServerURL[%] | Max. 74 characters; | Yes | Server address; |
BS_LDAP_Netdirs.astNetdirProvider[0].uiServerPort | Yes | Port on which LDAP server listens; | |
BS_LDAP_Netdirs.astNetdirProvider[0].aucBaseDN[%] | Max. 50 characters; | Yes | Base Distinguished Name Dn of LDAP database; |
BS_LDAP_Netdirs.astNetdirProvider[0].aucUsername[%] | Max. 50 characters; | Yes | Username; |
BS_LDAP_Netdirs.astNetdirProvider[0].aucPassword[%] | Max. 64 characters; | Yes | Password; |
BS_LDAP_Netdirs.astNetdirProvider[0].NameFilter[%] | Max. 50 characters; | No | Name filter criteria for the search; |
BS_LDAP_Netdirs.astNetdirProvider[0].NumberFilter[%] | Max. 50 characters; | No | Number filter criteria for the search; |
BS_LDAP_Netdirs.astNetdirProvider[0].NameAttributes[%] | Max. 50 characters; | No | Definition which information should be delivered as the search result for the search by name; |
BS_LDAP_Netdirs.astNetdirProvider[0].NumberAttributes[%] | Max. 50 characters; | No | Definition which information should be delivered as the search result for the search by number; |
BS_LDAP_Netdirs.astNetdirProvider[0].DisplayName[%] | Max. 50 characters; | No | Format for displaying names; |
Management - Date &Time | |||
BS_IP_Data.ucB_TIME_USE_AUTOMATIC_NTP_SYN | 0 => No; 1 => Yes; | Yes | WebUI: Enable automatic adjustment of System Time with Time Server; |
BS_IP_Data.aucS_TIME_NTP_SERVER | Max. 74 characters; | Yes | WebUI: Time server address; |
BS_IP_Data.uiI_TIME_TIMEZONE | For valid time zone numbers see "dialing_numbers_and_timeszones.txt"; | Yes | WebUI: Time zone number; |
BS_IP_Data.ucB_TIME_USE_AUTOMATIC_DST | 0 => No; 1 => Yes; | Yes | WebUI: Automatically adjust clock to summer-time changes; |
Management - Local settings | |||
BS_IP_Data.ucI_DIALING_PLAN_COUNTRY_ID | The country number is used for predefining the area codes. For valid country numbers and area codes see "dialing_numbers_and_timeszones.txt"; | Yes | WebUI: Local country number; |
BS_CUSTOM_ORG.aucInternationalPrefix | Nibble coded; Max. 4 digits (nibbles);D => never set;F => end; | Yes | WebUI: International Prefix; |
BS_CUSTOM_ORG.aucCountryCode | Nibble coded; Max. 4 digits (nibbles);D => never set;F => end; | Yes | WebUI: International Code Number (Country Code); |
BS_CUSTOM_ORG.aucNationalPrefix | Nibble coded; Max. 4 digits (nibbles);D => never set;F => end; | Yes | WebUI: Local (national) prefix; |
BS_IP_Data.ucB_USE_CITY_CODE | 0 => No; 1 => for local and national calls; 2 => for local calls; | Yes | WebUI: Using area codes; |
BS_AE_SwConfig.ucCountryCodeTone | 0 => default tones; 1 => US; 2 => Swisscom; 3 => RSA; 4 => AUT; 5 => CZE; 6 => ESP; 7 => FRA; 8 => GBR; 9 => NLD; 10 => POL; 11 => RUS; | Yes | WebUI: Tone scheme selection; |
Management - Miscellaneous | |||
BS_IP_Data.ucI_HTTPLANGUAGE | 0x01 => US; 0x02 => GER; 0x04 => SPAIN; 0x05 => PORTUG; 0x07 => ITALY; 0x09 => FRENCH; 0x0a => NETHER; 0x0f => CZECH; 0x11 => POLISH; 0x16 => SLOVAKIAN; 0x17 => RUSSIAN; 0x18 => GREEK; 0x1b => SLOVENIAN; 0x1c => ROMANIAN; | Yes | WebUI: ID of the Web UI language; |
BS_CUSTOM.WebUIPassword | Max. 19 characters; | Yes | WebUI: WEB UI password; |
BS_Satellites.bShowCellStateViaLED | 0 => No; 1 => Yes; | Yes | WebUI: Activate signalling of base station state via LED; |
BS_IP_Data.ucB_DO_CHECK_FOR_PROFILE_UPDATES | 0 => No; 1 => Yes; | Yes | Automatic check and update of new profile data; |
Management - Reboot | |||
BS_CUSTOM.RebootCondition | 0 => optional 1 => daily | Yes | Reboot and synchronisation condition: |
BS_CUSTOM.SystemCheckOnWeekdays | Bitmask with one bit for each weekday where system check should run. Bitmasks for the days: 0x01 => Monday, 0x02 => Tuesday, 0x04 => Wednesday, 0x08 => Thursday, 0x10 => Friday, 0x20 => Saturday, 0x40 => Sunday | Yes | System check every; |
BS_CUSTOM.SystemCheckStartTimeHours | BCD coded; If initialized with value 0xff then value is set at first system start with a random value between 0:30 and 3:30; | Yes | Hours of system check starttime; |
BS_CUSTOM.SystemCheckStartTimeMinutes | BCD coded; If initialized with value 0xff then value is set at first system start with a random value between 0:30 and 3:30; | Yes | Minutes of system check starttime; |
Management - System log | |||
BS_Syslog.aucServerIPAddress[%] | Yes | Web UI: Settings - Management - System log IP address of syslog server | |
BS_Syslog.uiServerPort | Yes | Web UI: Settings - Management - System log Syslog server port | |
BS_Syslog.ulFacilityMask | Web UI: Settings - Management - System log | ||
BS_Syslog.ulSeverityMask | Web UI: Settings - Management - System log | ||
BS_Syslog.bActivateSyslog | 0 => No; 1 => Yes; | Yes | Web UI: Settings - Management - System log Enable / disable syslog server |
Management - Firmware Update | |||
BS_IP_Data.UpdateStrategy | 0 => sequential;1 => simultaneous; | Yes | Update strategy for the satellites; |
BS_IP_Data.KindOfPlannedUpdate | 1=> for firmware update 2=> for firmware downgrade to former version 3=> for firmware downgrade to delivery version | ||
BS_IP_Data.PlannedUpdateTime | 0x648 (default) | Should be used together with KindOfPlannedUpdate Unix timestamp: 0x648 - Thu, 01 Jan 1970 00:10:48 GMT | |
Firmware update | |||
S_SPECIAL_DATA_SRV_IWU | No | Direct link towards DECT Manager firmware file. Example: <S_SPECIAL_DATA_SRV_IWU class="string" value='"http://192.168.178.101/device/firmware/server_einstein_iwu095.bin"'/> Name of file should be "server_einstein_iwu_Softwareversion.bin" Restart/Sync/After time is needed to start upgrade. | |
S_SPECIAL_DATA_SRV_SAT | No | Direct link towards DECT Basestation firmware file. Example: <S_SPECIAL_DATA_SRV_SAT class="string" value='"http://192.168.178.101/device/firmware/sat7109500000000.bin"'/> Naming of file should be like in the above example. Restart/Sync/After time is needed to start upgrade. | |
Broadsoft provisioning | |||
BS_IP_Data.ucI_PHONE_SYSTEM | 0=default setting; 5=Broadsoft | No | Usage of non symbolic: <I_PHONE_SYSTEM class="integer" value="5"/> symbolic NVM where custom parameter will be stored: BS_IP_Data.ucI_PHONE_SYSTEM |
S_PROV_USERNAME | Max. 50 characters | No | Usage of non symbolic: <S_PROV_USERNAME class="string" value="broadsoft-username"/> Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_USERNAME |
S_PROV_PASSWORD | Max. 50 characters | No | Usage of non symbolic: <S_PROV_PASSWORD class="string" value="broadsoft-password"/> Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_HTTP_DIGEST_PASSWORD |
S_CONFIGFILE_URL | Max. 74 characters | Yes | Symbolic NVM where custom parameter will be stored: BS_IP_Data.aucS_CONFIGFILE_URL |
BS_IP_Data.ucB_DISABLE_CVS_ON_HANDSET | 0=enabled (default); 1=disabled | No | Available only when: I_PHONE_SYSTEM=5; symbolic NVM where custom parameter will be stored: BS_IP_Data.ucB_DISABLE_CVS_ON_HANDSET For non symbolic usage - disable CVS on handset: <I_PHONE_SYSTEM class="integer" value="5"/> <Disable_Common_Voice_Services_on_Handset class="integer" value="1"/> For symbolic usage - disable CVS on handset: <SYMB_ITEM ID="BS_IP_Data.ucI_PHONE_SYSTEM" class="symb_item" value="5"/> <SYMB_ITEM ID="BS_IP_Data.ucB_DISABLE_CVS_ON_HANDSET" class="symb_item" value="1"/> |
Advanced settings | |||
BS_VOIP_Data.astVoipProviders[%].CLIR_PRIVACY_LEVEL | 0x40 0x41 | No | Settings to change Anonymous Call behaviour 0x40 => privacy: id 0x41 => privacy: id + From: Anonymous |
BS_VOIP_Data.ul_SIP_AllowMethodMask | 0x0000173E 0x0000373E | No | To activate the support of SIP (CLIP) UPDATE method you must change BS_VOIP_Data.ul_SIP_AllowMethodMask from 0x0000173E to 0x0000373E |
BS_VOIP_Data.astVoipProviders.ulSessionRefresh_MIN_SE | 0 = disabled (default) | No | Session Timer InitValue=0 //feature off |
BS_VOIP_Data.aucS_SIPAlertInfoHeaderInternal | alert-internal | No | Defines the Alert-Info header value of the info parameter which indicates that the call should be signaled with internal ringing pattern: |
BS_CUSTOM.ucAkzVoipNotUsedNumberLength | 0xff | When enabled. | Control switch = BS_CUSTOM.ucAkzVoipNotUsedNumberLength 0 -> feature is switched off by user |