Parameter name | Description | |||
---|---|---|---|---|
Web-interface: Settings - Network - IP | ||||
Device name | Value | |||
Device name in the network: Label for the device. It is used to identify the device in network communication. | ||||
Address Assignment | Value | |||
Network type: IPv4 / IPv6 (planned) | ||||
IP address type: Dynamic / Static | ||||
IP address: | ||||
Subnet mask: | ||||
Standard gateway: | ||||
Preferred DNS: | ||||
Alternate DNS: | ||||
Web-interface: Settings - Network - LAN | ||||
VLAN | Value | |||
VLAN tagging: | ||||
0 - 4094 | VLAN identifier: | |||
0 - 7 | VLAN priority: | |||
Web-interface: Settings - Base stations - Administration | ||||
ConfirmedBaseStations.<mac>.name | Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network | |||
ConfirmedBaseStations.<mac>.ucTxPower | 0 | 1 | 0 = Normal power output (Default) | |
ConfirmedBaseStations.<mac>.bActivateCell | 0 | 1 | 0 = Base station deactivated 1 = Activated base station (Default) | |
Web-interface: Settings - Base stations - Synchronization | ||||
ConfirmedBaseStations.<mac>.ucCluster | 1 | 10 | Select the cluster to which the base should be assigned to from the option menu. | |
ConfirmedBaseStations.<mac>.ucSyncLevel | 1 | 10 | Select the synchronization level for the base station. | |
ConfirmedBaseStations.<mac>.bSyncLanMaster | 0 | 1 | 0 = Off (Default) | |
Web-interface: Settings - Provider or PBX profiles | ||||
VoIP Provider | Value | |||
SipProvider.<0-9>.Name | Connection name or number: Name for the provider or PBX profile. This name is shown in the Provider/PBX list | |||
Phone system | Value | |||
SipProvider.<0-9>.PhoneSystem | System:
| |||
General data of your service provider | Value | |||
SipProvider.<0-9>.Domain | Domain: Domain part of the user address (SIP URI) | |||
SipProvider.<0-9>.ProxyServerAddress | IP address/ DNS name | Proxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests | ||
SipProvider.<0-9>.ProxyServerPort | 1 - 65535 | Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests. | ||
SipProvider.<0-9>.RegServerAddress | IP address/ DNS name | Registration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain) | ||
SipProvider.<0-9>.RegServerPort | 1 - 65535 | Registration server port (Default 5060): Enter the communication port used on the registrar. | ||
SipProvider.<0-9>.RegServerRefreshTimer | 1 - 5 digits | Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy) | ||
SipProvider.<0-9>.TransportProtocol | 1 = UDP 2 = TCP 3 = TLS | Transport protocol: | ||
SipProvider.<0-9>.UseSIPS | 0 - 1 | Use SIP Security (SIPS): | ||
SipProvider.<0-9>.SRTP_Enabled | 0 - 1 | Secure Real Time Protocol: Security (RTP) is activated for voice connections. 0 = SRTP disabled (Default) 1 = SRTP enabled | ||
SipProvider.<0-9>.AcceptNonSRTPCalls | 0 - 1 | Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated. | ||
Redundancy | Value | |||
SipProvider.<0-9>.DnsQuery | 0 - 1 | Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:. | ||
Failover Server | Value | |||
SipProvider.<0-9>.FailoverServerEnabled | 0 -1 | Failover Server: 0 = Off 1 = On | ||
SipProvider.<0-9>.FailoverServerAddress | IP address/ DNS name | Registration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server. | ||
SipProvider.<0-9>.FailoverServerPort | 1- 65535 | Registration port (Default 5060): The communication port used on the failover registrar. | ||
Network data of your service provider | Value | |||
SipProvider.<0-9>.OutboundProxyMode | 0 = Always 2 = Never | Outbound proxy mode: | ||
SipProvider.<0-9>.OutboundProxyAddress | IP address/ DNS name | Outbound server address: | ||
SipProvider.<0-9>.OutboundProxyPort | 1 - 65535 | Outbound proxy port (Default 5060) | ||
SipProvider.<0-9>.MWISubscription | 0 -1 | SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox | ||
DTMF over VoIP Connections | Value | |||
SipProvider.<0-9>.DTMFTransmission | 1 = Audio 2 = RFC 2833 3 = Audio + RFC 2833 4 = SIP INFO 5 = Audio + SIP INFO 6 = RFC 2833 + SIP INFO 7 = Audio + RFC 2833 + SIP INFO 129 = Automatic DTMF Negotiation | |||
Settings for Codecs | Value | |||
SipProvider.<0-9>.ActiveCodecs | 18,9,8,0 | Active codecs: 0 = g711u | ||
SipProvider.<0-9>.RTPPtime | 20, 30 | RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet. | ||
SipProvider.<0-9>.HoldType | 0 - 1 | Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly. 0 = Inactive | ||
SipProvider.<0-9>.CT_HoldTT_Attended | 0 - 1 | 0 = Attended Transfer 1 = Unattended Transfer | ||
SipProvider.<0-9>.CT_HoldTT_Unattended | 0 - 1 | Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer | ||
Display of Caller Information | Value | |||
SipProvider.<0-9>.CLIPSource | 0 - 2 | 0 = FROM 1 = PPI+FROM 2 = PAI+PPI+FROM (Default) | ||
Service Codes | Value | |||
SipProvider.<0-9>.ServiceCode_CC_On | Call Completion on (CCBS, CCNR): | |||
SipProvider.<0-9>.ServiceCode_CC_Off | Call Completion off (CCBS, CCNR): | |||
CSTA | Value | |||
SipProvider.<0-9>.CSTA_IsActive | Active: Yes | |||
SipProvider.<0-9>.CSTA_IsExternal | External: Yes | |||
SipProvider.<0-9>.CSTA_Address | Address: | |||
SipProvider.<0-9>.CSTA_Port | Port: | |||
SipProvider.<0-9>.CSTA_UseSips | Use SIP Security (SIPS): Yes | |||
SipProvider.<0-9>.CSTA_RegServerRefreshTimer | Registration refresh time: | |||
SipProvider.<0-9>.CSTA_TransportProtocol | Transport protocol: UDP | |||
SipProvider.<0-9>.CSTA_DnsQuery | DNS query: A | |||
SipProvider.<0-9>.AllowRouteHeaders | ||||
SipProvider.<0-9>.DnDServiceCodeOff | ||||
SipProvider.<0-9>.DnDServiceCodeOn | ||||
SipProvider.<0-9>.DnDType | ||||
SipProvider.<0-9>.RequestCheckOpt | ||||
SipProvider.<0-9>.STUNAddress | ||||
SipProvider.<0-9>.STUNEnabled | ||||
SipProvider.<0-9>.STUNPort | ||||
SipProvider.<0-9>.STUNRefreshTimer | ||||
Web-interface: Settings - Mobile devices | ||||
DmGlobal.0.HSIdleDisplay | 0 - 1 | Displayed name in idle display 0 = Username | ||
Web-interface: Settings - Mobile devices - Administration | ||||
Mobile device | ||||
hs.<ipui>.Ipui | ||||
hs.<ipui>.RegStatus | ToReg = "To Register", add new Handset | |||
hs.<ipui>.DECT_AC | Authentication Code (PIN) | |||
Personal provider data | ||||
SipAccount.<ipui>.Active | ||||
SipAccount.<ipui>.AuthName | SIP Authentication name | |||
SipAccount.<ipui>.AuthPassword | SIP Authentication password | |||
SipAccount.<ipui>.UserName | SIP Username | |||
SipAccount.<ipui>.DisplayName | SIP Display name | |||
SipAccount.<ipui>.ProviderId | VoIP provider | |||
SipAccount.<ipui>.AuthenticateAutoAnswerCall | ||||
SipAccount.<ipui>.CLIR | ||||
SipAccount.<ipui>.CallDivert_Active | ||||
SipAccount.<ipui>.CallDivert_Delay | ||||
SipAccount.<ipui>.CallDivert_Mode | ||||
SipAccount.<ipui>.CallDivert_Target | ||||
SipAccount.<ipui>.CallWaiting | ||||
SipAccount.<ipui>.DnDActive | ||||
Online directories | ||||
hs.<ipui>.DirectAccessDir | Directory for direct access | |||
hs.<ipui>.IntKeyDir | Corporate directory for INT key | |||
hs.<ipui>.AutoLookupDir | Automatic look-up | |||
LDAP authentication | ||||
hs.<ipui>.LDAPId | Selected LDAP book | |||
hs.<ipui>.LDAPShowProviders | Show other LDAP servers | |||
hs.<ipui>.LDAPAuthType | LDAP authorization type | |||
hs.<ipui>.LDAPUseSIPCredentials | LDAP Use personal provider data (SIP) | |||
hs.<ipui>.LDAPUsername | LDAP Username | |||
hs.<ipui>.LDAPPassword | LDAP Password | |||
Network mailbox configuration | ||||
SipAccount.<ipui>.VoiceMailMailbox | Voicemail box number / name | |||
SipAccount.<ipui>.VoiceMailActive | Activate Voicemail box 0 = Disabled | |||
Group pick-up | ||||
SipAccount.<ipui>.OpenScapeGroupPickupAddress | Call number or SIP name (URI) | |||
SipAccount.<ipui>.OpenScapeGroupPickupActive | Activate group pick-up | |||
Call manager | ||||
hs.<ipui>.CallManagerCallsVia | Accept calls directly via Call Manager | |||
Missed calls and alarms | ||||
hs.<ipui>.SaveMissedCalls hs.<ipui>.SaveAcceptedCalls | Missed/accepted calls count | |||
hs.<ipui>.ShowMissedCalls | Flashing LED (MWI) for missed calls | |||
hs.<ipui>.ShowMissedAlarms | Flashing LED (MWI) for missed alarms | |||
hs.<ipui>.ShowMissedNetAM | Flashing LED (MWI) for network mailbox | |||
CSTA | ||||
SipAccount.<ipui>.CSTA_Username | Username | |||
SipAccount.<ipui>.CSTA_AuthName | Authentication name | |||
SipAccount.<ipui>.CSTA_AuthPassword | Authentication password | |||
Parameter name | Value:min | Value:max | Value:Allowed | |
Web-interface: Settings - Mobile devices - Registration Center | ||||
Parameter name | Value:min | Value:max | Value:Allowed | |
Web-interface: Settings - Telephony - VoIP | ||||
DmGlobal.0.Port | 1 | 65535 | SIP port (Default 5060) | |
Secure | Secure SIP port (Default 5061) | |||
DmGlobal.0.Timers_T1 | SIP timer T1 (Default 500) | |||
DmGlobal.0.Timers_Session | SIP session timer (Default 1800) | |||
DmGlobal.0.Timers_FailedRegistration | Failed registration retry timer (Default 300) | |||
DmGlobal.0.Timers_Subscription | Subscription timer (Default 1800) | |||
DmGlobal.0.PRACK | 0 | 1 | 0 = PRACK disabled 1 = PRACK enabled | |
SIP Security Password | ||||
DmGlobal.0.QoS_SIP_DSCP | SIP ToS / DiffServ (Default 34) | |||
DmGlobal.0.QoS_RTP_DSCP | RTP ToS / DiffServ (Default 46) | |||
Parameter name | Value:min | Value:max | Value:Allowed | |
Web-interface: Settings - Telephony - Audio | ||||
DmGlobal.0.WidebandEnabled | 0 | 1 | 0 = Wideband with codec G.722 disabled 1 = Wideband with codec G.722 disabled | |
Parameter name | Value:min | Value:max | Value:Allowed | |
Web-interface: Settings - Telephony - Call settings | ||||
Call Transfer | ||||
Telephony.0.CT_ViaRKey | 0 - 1 | Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated. | ||
Telephony.0.CT_ByOnHook | 0 - 1 | Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated. | ||
Telephony.0.CT_AutoDetermineAddress | 0 - 1 | Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI) | ||
Access Code | ||||
Telephony.0.AccessCode | max. 3 digits (0 - 9, *, R, #, P) | Access Code: | ||
Telephony.0.AccessCodeFor | Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory. 0 = Outgoing calls list | |||
Area Codes | ||||
AreaCodes.0.Country |
| Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields. | ||
International | ||||
AreaCodes.0.Int_Prefix | max. 4 digits, 0-9 | Prefix: | ||
AreaCodes.0.Int_Code | max. 4 digits, 0-9 | Area code: | ||
Local | ||||
AreaCodes.0.Local_Prefix | max. 4 digits, 0 - 9 | Prefix: | ||
AreaCodes.0.Local_Code | max. 8 digits, 0 - 9 | Area code: | ||
Tone Selection | ||||
Telephony.0.ToneScheme |
| Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu. | ||
Parameter name | Value:min | Value:max | Value:Allowed | |
Web-interface: Settings - Online directories - Public | ||||
XMLDir.0.ProviderName | Public | Directory name | ||
XMLDir.0.ServerURL | Server address | |||
XMLDir.0.Username | Username | |||
XMLDir.0.Password | Password | |||
Netdir.4.Activated | Enable Public White Pages | |||
Maximum number of entries | ||||
XMLDir.0.WhitePagesDirName | Directory name | |||
XMLDir.0.StartWithListWP | 0 | 1 | 0: off 1: on | |
Netdir.5.Activated | Enable Public Yellow Pages | |||
XMLDir.0.YellowPagesDirName | Directory name | |||
XMLDir.0.StartWithListYP | 0 | 1 | 0: off 1: on | |
Netdir.6.Activated | Enable Public Private Pages | |||
XMLDir.0.PrivatePagesDirName | Directory name | |||
XMLDir.0.StartWithListPP | 0 | 0: off 1: on | ||
Web-interface: Settings - Online directories - Corporate | ||||
Access to LDAP server | ||||
LDAPDir.0.DirName | max. 20 characters | Directory name: | ||
??????? | Enable directory | |||
LDAPDir.0.ServerURL | IP address/ DNS name | Server address: Enter the URL of the LDAP server | ||
LDAPDir.0.ServerPort | 1 - 65535 | Server port: Enter the port the LDAP server expects database requests (Default: 389) | ||
LDAPDir.0.BaseDN | Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin. | |||
LDAPDir.0.Username | max. 254 characters | Username: Enter a global username for the user access to the LDAP director. | ||
LDAPDir.0.Password | max. 254 characters | Password: Enter a global password for the user access to the LDAP directory. | ||
Search in LDAP database | Value | |||
LDAPDir.0.StartWithList | 0 - 1 | Enable List mode: Define what should be initially shown, when the user opens the LDAP directory 0: off | ||
LDAPDir.0.NameFilter | (|(cn=%)(sn=%)) | Name filter: The name filter decides which attribute is used for the search. | ||
LDAPDir.0.NumberFilter | (|(telephoneNumber=%)(mobile=%)) | Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers. | ||
LDAPDir.0.AdditionalFilter1Name | Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed. | |||
LDAPDir.0.AdditionalFilter1 | Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field. | |||
LDAPDir.0.AdditionalFilter2Name | Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed. | |||
LDAPDir.0.AdditionalFilter2 | Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field. | |||
LDAPDir.0.DisplayName | Display format: In this field you can stipulate how the search result is to be displayed on the handset. | |||
LDAPDir.0.MaxNrOfSearchEntries | 50 | Max. number of search results: | ||
Configuration of directory items | Value | |||
LDAPDir.0.ItemFN | First name | |||
LDAPDir.0.ItemLN | Surname | |||
LDAPDir.0.ItemPH | Phone (home) | |||
LDAPDir.0.ItemPO | Phone (office) | |||
LDAPDir.0.ItemPM | Phone (mobile) | |||
LDAPDir.0.ItemEM | ||||
LDAPDir.0.ItemFX | Fax | |||
LDAPDir.0.ItemCP | Company | |||
LDAPDir.0.ItemST | Street | |||
LDAPDir.0.ItemCT | City | |||
LDAPDir.0.ItemZP | Zip | |||
LDAPDir.0.ItemCO | Country | |||
LDAPDir.0.ItemAA | Additional attribute | |||
LDAPDir.0.IsAdditionalAttributeDialable | 0 - 1 | 0: off | ||
LDAPDir.0.BookNo | ||||
LDAPDir.0.MaxNrOfSessions | 100 | |||
LDAPDir.0.TlsMode | 0 - 1 | |||
LDAPDir.0.UseIndividualCredentials | 0 - 1 | 0: off 1: on | ||
Web-interface: Settings - Online directories - XML | ||||
Web-interface: Settings - System - Web configurator | ||||
WebUIAccounts.1.Password | Change Password > New password (Admin) | |||
CLI Password | ||||
Web-interface: Settings - System - Provisioning and configuration | ||||
Provisioning and configuration | ||||
Provisioning.global.ProvisioningServer | max. 255 characters | Provisioning server: Enter the URL of your provisioning server in the text field. | ||
Web-interface: Settings - System - Security | ||||
Accept all certificates | ||||
Security.global.HTTPAuthUsername | HTTP Authentication > HTTP digest username | |||
Security.global.HTTPAuthPassword | HTTP Authentication > HTTP digest password | |||
Web-interface: Settings - System - System log | ||||
DmGlobal.0.SysLogEnable | 0 | 1 | 0: off 1: on | |
DmGlobal.0.SysLogServer | Server address | |||
DmGlobal.0.SysLogServerPort | Server port (Default 514) | |||
StateInfo.global.DebugLevelMask | DWE | D = debug W = warning E = error I = info T = test | ||
SNMP manager address | ||||
SNMP manager port | ||||
Web-interface: Settings - System - Date and time | ||||
Date and time | ||||
DmGlobal.0.NtpServer Fcod | ||||
DmGlobal.0.TimeZone | timezones.txt | |||
Act as Local Time Server | ||||
Web-interface: Settings - System - Date and time | ||||
URL to firmware file | ||||
Planned schedule | ||||
Hidden Parameters | ||||
DmGlobal.0.DECTCipherDisable | > disable ciphering | |||
DmGlobal.0.DECTEcoMode | > eco mode | |||
DmGlobal.0.DECTEnhancedEncryption | > enhanced encryption | |||
DmGlobal.0.DECTBlindslots | > blind slot configuration (12 slots) | |||
DmGlobal.0.DECTAvailFrequencies | > available frequencies configuration (10 f.) | |||
DmGlobal.0.DECTCfSettings | > cf mode | |||
DmGlobal.0.DECTTBR6Mode | > DECT TBR6 test mode | |||
DmGlobal.0.DectEchoConfig | > DECT echo configuration mask: | |||
DmGlobal.0.NetworkEchoConfig | > BS network echo configuration: | |||