Web-interface: Settings - Network - IP | ||||
---|---|---|---|---|
Device name | ||||
Not via provisioning | Device name in the network: Label for the device. It is used to identify the device in network communication. | |||
Address Assignment | ||||
Not via provisioning | Network type: IPv4 / IPv6 (planned) | |||
Not via provisioning | IP address type: Dynamic / Static | |||
Not via provisioning | IP address: | |||
Not via provisioning | Subnet mask: | |||
Not via provisioning | Standard gateway: | |||
Not via provisioning | Preferred DNS: | |||
Not via provisioning | Alternate DNS: | |||
Web-interface: Settings - Network - LAN | ||||
VLAN | ||||
Not via provisioning | VLAN tagging: | |||
Not via provisioning | 0 - 4094 | VLAN identifier: | ||
Not via provisioning | 0 - 7 | VLAN priority: | ||
Web-interface: Settings - Base stations - Administration | ||||
ConfirmedBaseStations.<mac>.name | Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network | |||
ConfirmedBaseStations.<mac>.ucTxPower | 1 | 0 = Normal power output (Default) | ||
ConfirmedBaseStations.<mac>.bActivateCell | 1 | 0 = Base station deactivated 1 = Activated base station (Default) | ||
Web-interface: Settings - Base stations - Synchronization | ||||
ConfirmedBaseStations.<mac>.ucCluster | 1 - 10 | Select the cluster to which the base should be assigned to from the option menu. | ||
ConfirmedBaseStations.<mac>.ucSyncLevel | 1 - 10 | Select the synchronization level for the base station. | ||
ConfirmedBaseStations.<mac>.bSyncLanMaster | 0 - 1 | 0 = Off (Default) | ||
Web-interface: Settings - Provider or PBX profiles | ||||
VoIP Provider | ||||
SipProvider.<0-9>.Name | Connection name or number: Name for the provider or PBX profile. This name is shown in the Provider/PBX list | |||
Phone system | ||||
SipProvider.<0-9>.PhoneSystem | 0 = Automatic | System: | ||
General data of your service provider | ||||
SipProvider.<0-9>.Domain | Domain: Domain part of the user address (SIP URI) | |||
SipProvider.<0-9>.ProxyServerAddress | IP address/ DNS name | Proxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests | ||
SipProvider.<0-9>.ProxyServerPort | 1 - 65535 | Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests. | ||
SipProvider.<0-9>.RegServerAddress | IP address/ DNS name | Registration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain) | ||
SipProvider.<0-9>.RegServerPort | 1 - 65535 | Registration server port (Default 5060): Enter the communication port used on the registrar. | ||
SipProvider.<0-9>.RegServerRefreshTimer | 1 - 5 digits | Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy) | ||
SipProvider.<0-9>.TransportProtocol | 1 = UDP 2 = TCP 3 = TLS | Transport protocol: | ||
SipProvider.<0-9>.UseSIPS | 0 = SIPS disabled (Default) 1 = SIPS enabled | Use SIP Security (SIPS): | ||
SipProvider.<0-9>.SRTP_Enabled | 0 = SRTP disabled (Default) 1 = SRTP enabled | Secure Real Time Protocol: Security (RTP) is activated for voice connections. | ||
SipProvider.<0-9>.AcceptNonSRTPCalls | 0 = Do not accept non-SRTP calls 1 = Accepts non-SRTP calls | Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated. | ||
Redundancy | ||||
SipProvider.<0-9>.DnsQuery | 0 = A 1 = SRV + A | Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:. | ||
Failover Server | ||||
SipProvider.<0-9>.FailoverServerEnabled | 0 = Off 1 = On | Failover Server: | ||
SipProvider.<0-9>.FailoverServerAddress | IP address/ DNS name | Registration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server. | ||
SipProvider.<0-9>.FailoverServerPort | 1- 65535 | Registration port (Default 5060): The communication port used on the failover registrar. | ||
Network data of your service provider | ||||
SipProvider.<0-9>.OutboundProxyMode | 0 = Always 2 = Never | Outbound proxy mode: | ||
SipProvider.<0-9>.OutboundProxyAddress | IP address/ DNS name | Outbound server address: | ||
SipProvider.<0-9>.OutboundProxyPort | 1 - 65535 | Outbound proxy port (Default 5060) | ||
SipProvider.<0-9>.MWISubscription | 0 = Do not send SIP Subscribe for MWI 1 = Send SIP Subscribe for MWI | SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox | ||
DTMF over VoIP Connections | ||||
SipProvider.<0-9>.DTMFTransmission | 1 = Audio 2 = RFC 2833 3 = Audio + RFC 2833 4 = SIP INFO 5 = Audio + SIP INFO 6 = RFC 2833 + SIP INFO 7 = Audio + RFC 2833 + SIP INFO 129 = Automatic DTMF Negotiation | Send settings of DTMF transmission | ||
Settings for Codecs | ||||
SipProvider.<0-9>.ActiveCodecs | 0 = g711u Example: 18,9,8,0 | Active codecs: | ||
SipProvider.<0-9>.RTPPtime | 20, 30 | RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet. | ||
SipProvider.<0-9>.HoldType | 0 = Inactive 1 = Sendonly (Default) | Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly. | ||
SipProvider.<0-9>.CT_HoldTT_Attended | 0 = No 1 = Yes | Hold towards Transfer-Target: The device enables call transfer after consultation or without consultation. Define, whether a consultation call with transfer target is put on-hold prior to the execution of the call transfer (Yes) or not (No) | ||
Display of Caller Information | ||||
SipProvider.<0-9>.CLIPSource | 0 = FROM 1 = PPI+FROM 2 = PAI+PPI+FROM (Default) | Calling Party (User Part): From the option menu select which information is allowed to be transferred to the receiving part within the SIP header. Which information is actually transferred is determined by the provider. | ||
Service Codes | ||||
SipProvider.<0-9>.ServiceCode_CC_On | Call Completion on (CCBS, CCNR): | |||
SipProvider.<0-9>.ServiceCode_CC_Off | Call Completion off (CCBS, CCNR): | |||
CSTA | ||||
SipProvider.<0-9>.CSTA_IsActive | 0 = No | Active: | ||
SipProvider.<0-9>.CSTA_IsExternal | 0 = No 1 = Yes | External: | ||
SipProvider.<0-9>.CSTA_Address | Address: | |||
SipProvider.<0-9>.CSTA_Port | Port: | |||
SipProvider.<0-9>.CSTA_DnsQuery | 0 = A 1 = SRV +A | DNS query: | ||
Web-interface: Settings - Mobile devices | ||||
Global Settings | ||||
DmGlobal.0.HSIdleDisplay | 0 = Username 1 = Display name | Displayed name in idle display: | ||
Web-interface: Settings - Mobile devices - Administration | ||||
Mobile device | ||||
hs.<ipui>.Ipui | IPUI: (International Portable User Identity) Unique identifier of a handset within the DECT network. If you edit an existing handset registration entry, the IPUI is shown and cannot be changed. | |||
hs.<ipui>.RegStatus | ToReg = "To Register", add new Handset ToDeReg = "To DeRegister", delete existing HS NotReg = "Not Registered", default value | RegStatus: DECT registration status of the handset entry. | ||
hs.<ipui>.DECT_AC | min. 1, max. 4 digits | Authentication Code (PIN): This PIN must be used on the handset to register with the DECT network. | ||
Personal provider data | ||||
SipAccount.<ipui>.Active | ||||
SipAccount.<ipui>.AuthName | Max. 74 characters | SIP Authentication name: Specify the SIP authentication (HTTP digest) name. The Authentication name acts as access ID when registering with the SIP proxy/registrar server. It is usually identical to the phone number for the VoIP account. | ||
SipAccount.<ipui>.AuthPassword | Max. 74 characters | SIP Authentication password: Enter the password for SIP authentication (HTTP digest). The phone needs the password when registering with the SIP proxy/registrar server. | ||
SipAccount.<ipui>.UserName | Max. 74 characters | SIP Username: Enter the caller ID for the VoIP provider account. It is usually identical to the phone number for the VoIP account. | ||
SipAccount.<ipui>.DisplayName | Max. 74 characters | SIP Display name: | ||
SipAccount.<ipui>.ProviderId | 0 - 9 | VoIP provider: | ||
Online directories | ||||
hs.<ipui>.DirectAccessDir | Directory for direct access: The user can press and hold the directory key (bottom of the control key) to open either the list of online directories or the local directory of the handset. Choose which directory is called up with the directory key. | |||
hs.<ipui>.IntKeyDir | Corporate directory for INT key: If a corporate directory is available and configured the user can open it by pressing the INT key (left on the handset’s control key). Choose from the list which corporate directory is opened with the INT key. | |||
hs.<ipui>.AutoLookupDir | Automatic look-up: Select an online directory from the list for Automatic look-up or deactivate this option. When there is an incoming call, the caller's name is read from this directory and shown in the display (the availability of this function depends on the online directory provider). | |||
LDAP authentication | ||||
hs.<ipui>.LDAPId | 255 = None | Selected LDAP book: Select the LDAP directory to be provided on the handset from the option menu. | ||
hs.<ipui>.LDAPShowProviders | 0 = No 1 = Yes | Show other LDAP servers: Select Yes if directories of other LDAP servers should be allowed to be shown. | ||
hs.<ipui>.LDAPAuthType | 0 = Global 1 = User 2 = SIP | LDAP authorization type: Select how the user authentication should be performed: Global: Credentials are set for all handsets during the LDAP directory set-up. | ||
hs.<ipui>.LDAPUsername | Max. 254 characters | LDAP Username: Enter the user name for individually accessing the LDAP directory. | ||
hs.<ipui>.LDAPPassword | Max. 254 characters | LDAP Password: Enter the password for individually accessing the LDAP directory. | ||
Network mailbox configuration | ||||
SipAccount.<ipui>.VoiceMailMailbox | Call number or SIP name (URI): Enter the Call number or SIP name (URI) for the network mailbox. | |||
SipAccount.<ipui>.VoiceMailActive | 0 = Disabled 1 = Enabled | Activate Voicemail box | ||
Group pick-up | ||||
SipAccount.<ipui>.OpenScapeGroupPickupAddress | Call number or SIP name (URI): Enter the Call number or SIP name (URI) of the pick-up group. | |||
SipAccount.<ipui>.OpenScapeGroupPickupActive | 0 = Disabled 1 = Enabled | Activate group pick-up | ||
Call manager | ||||
hs.<ipui>.CallManagerCallsVia | No | Accept calls directly via Call Manager: From the option menu select whether calls that are transferred via the PBX call manager are to be accepted directly via Headset, via Handsfree or not at all (No). | ||
Missed calls and alarms | ||||
hs.<ipui>.SaveMissedCalls | 0 = No 1 = Yes | Missed/accepted calls count: Select Yes/No, to activate/deactivate the call counter for missed and accepted calls. The information is displayed in the handset’s call lists, missed calls are also shown on the handset’s idle display. | ||
hs.<ipui>.SaveAcceptedCalls | 0 = No 1 = Yes | Accepted calls count | ||
hs.<ipui>.ShowMissedCalls | 0 = No 1 = Yes | Flashing LED (MWI) for missed calls: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for missed calls. | ||
hs.<ipui>.ShowMissedAlarms | 0 = No 1 = Yes | Flashing LED (MWI) for missed alarms: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for missed alarms. | ||
hs.<ipui>.ShowMissedNetAM | 0 = No 1 = Yes | Flashing LED (MWI) for network mailbox: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for new messages on the network mailbox. | ||
CSTA | ||||
SipAccount.<ipui>.CSTA_Username | Username | |||
SipAccount.<ipui>.CSTA_AuthName | Authentication name | |||
SipAccount.<ipui>.CSTA_AuthPassword | Authentication password | |||
Web-interface: Settings - Mobile devices - Registration Center | ||||
See wiki article. | ||||
Web-interface: Settings - Telephony - Audio | ||||
Audio | ||||
DmGlobal.0.WidebandEnabled | 0 = Wideband with codec G.722 disabled 1 = Wideband with codec G.722 disabled | |||
Web-interface: Settings - Telephony - Call settings | ||||
Call Transfer | ||||
Telephony.0.CT_ViaRKey | 0 = No | Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated. | ||
Telephony.0.CT_ByOnHook | 0 = No | Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated. | ||
Telephony.0.CT_DeriveTargetAddress | sipurl sipcontact | Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI) | ||
Access Code | ||||
Telephony.0.AccessCode | max. 3 digits (0 - 9, *, R, #, P) | Access Code: | ||
Telephony.0.AccessCodeFor | 0x0003 = From incoming calls list | Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory. | ||
Area Codes | ||||
AreaCodes.0.Country |
| Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields. | ||
International | ||||
AreaCodes.0.Int_Prefix | max. 4 digits, 0-9 | Prefix: | ||
AreaCodes.0.Int_Code | max. 4 digits, 0-9 | Area code: | ||
Local | ||||
AreaCodes.0.Local_Prefix | max. 4 digits, 0 - 9 | Prefix: | ||
AreaCodes.0.Local_Code | max. 8 digits, 0 - 9 | Area code: | ||
Tone Selection | ||||
Telephony.0.ToneScheme |
| Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu. | ||
Web-interface: Settings - Telephony - Call settings | ||||
SIP | ||||
DmGlobal.0.Port | Range: 1-65535; Default: 5060 | SIP port: | ||
DmGlobal.0.TLS_Port | Range: 1-65535; Default: 5061 | Secure SIP port: Enter the SIP port used for secure VoIP connections (TLS). | ||
DmGlobal.0.Timers_T1 | Default: 500 ms | SIP timer T1: Enter the estimated round trip time of an IP packet between a SIP client and a SIP server (the time it takes between sending out the request to the point of getting a response). | ||
DmGlobal.0.Timers_Session | Max. 4 digits, min. 90 sec; Default: 1800 sec; | SIP session timer: Defines a session expiry interval: If the session isn't refreshed within the interval, the session is released. Session refresh is started after half of the interval by a re-INVITE message, which the peer side has to confirm to get the session refreshed. | ||
DmGlobal.0.Timers_FailedRegistration | Max. 4 digits, min. 10 sec; Default: 300 sec; | Failed registration retry timer: Specify after how many seconds the phone should attempt to reregister when the initial registration has failed. | ||
DmGlobal.0.Timers_Subscription | Default: 1800 s | Subscription timer: Defines the expiration time (in seconds) of a subscription. In order to keep subscriptions effective, subscribers need to refresh subscriptions on a periodic basis. | ||
DmGlobal.0.PRACK | 0 = PRACK disabled 1 = PRACK enabled | PRACK: (Provisional Response Acknowledgement) SIP provisional responses do not have an acknowledgement system so they are not reliable. The PRACK method guarantees a reliable and ordered delivery of provisional responses in SIP. | ||
Quality of Service (QoS) | ||||
DmGlobal.0.QoS_SIP_DSCP | 0 - 63 | SIP ToS / DiffServ: Enter your chosen QoS DiffServ class for SIP data packets. | ||
DmGlobal.0.QoS_RTP_DSCP | 0 - 63 | RTP ToS / DiffServ: Enter your chosen QoS DiffServ class for RTP data packets. | ||
Web-interface: Settings - Online directories - Corporate | ||||
Access to LDAP server | ||||
LDAPDir.0.DirName | Max. 20 characters | Directory name: Enter a name in the field . This is the name under which the directory will be displayed on the handsets | ||
??????? | Enable directory: | |||
LDAPDir.0.ServerURL | IP address/ DNS name | Server address: Enter the URL of the LDAP server | ||
LDAPDir.0.ServerPort | 1 - 65535 (Default: 389) | Server port: Enter the port the LDAP server expects database requests | ||
LDAPDir.0.BaseDN | Default: 0, the search starts at the upper area of the LDAP database. | Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin. | ||
LDAPDir.0.Username | max. 254 characters | Username: Enter a global username for the user access to the LDAP director. | ||
LDAPDir.0.Password | max. 254 characters | Password: Enter a global password for the user access to the LDAP directory. | ||
Search in LDAP database | ||||
LDAPDir.0.StartWithList | 0 = Off 1 = On | Enable List mode: Define what should be initially shown, when the user opens the LDAP directory | ||
LDAPDir.0.NameFilter | (|(cn=%)(sn=%)) | Name filter: The name filter decides which attribute is used for the search. | ||
LDAPDir.0.NumberFilter | (|(telephoneNumber=%)(mobile=%)) | Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers. | ||
LDAPDir.0.AdditionalFilter1Name | Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed. | |||
LDAPDir.0.AdditionalFilter1 | Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field. | |||
LDAPDir.0.AdditionalFilter2Name | Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed. | |||
LDAPDir.0.AdditionalFilter2 | Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field. | |||
LDAPDir.0.DisplayName | Display format: In this field you can stipulate how the search result is to be displayed on the handset. | |||
LDAPDir.0.MaxNrOfSearchEntries | 50 | Max. number of search results: | ||
Configuration of directory items | ||||
LDAPDir.0.ItemFN | First name | |||
LDAPDir.0.ItemLN | Surname | |||
LDAPDir.0.ItemPH | Phone (home) | |||
LDAPDir.0.ItemPO | Phone (office) | |||
LDAPDir.0.ItemPM | Phone (mobile) | |||
LDAPDir.0.ItemEM | ||||
LDAPDir.0.ItemFX | Fax | |||
LDAPDir.0.ItemCP | Company | |||
LDAPDir.0.ItemST | Street | |||
LDAPDir.0.ItemCT | City | |||
LDAPDir.0.ItemZP | Zip | |||
LDAPDir.0.ItemCO | Country | |||
LDAPDir.0.ItemAA | Additional attribute | |||
LDAPDir.0.IsAdditionalAttributeDialable | 0 = Disabled 1 = Enabled | |||
Web-interface: Settings - Online directories - Public | ||||
Public Directories | ||||
XMLDir.0.ProviderName | Public | Directory name | ||
XMLDir.0.ServerURL | Server address | |||
XMLDir.0.Username | Username | |||
XMLDir.0.Password | Password | |||
XMLDir.0.EntCount | Maximum number of entries | |||
Netdir.4.Activated | Enable Public White Pages | |||
XMLDir.0.WhitePagesDirName | Directory name | |||
XMLDir.0.StartWithListWP | 0 = Editor | Start mode | ||
Netdir.5.Activated | Enable Public Yellow Pages | |||
XMLDir.0.YellowPagesDirName | Directory name | |||
XMLDir.0.StartWithListYP | 0 = Editor 1 = List | Start mode | ||
Netdir.6.Activated | Enable Public Private Pages | |||
XMLDir.0.PrivatePagesDirName | Directory name | |||
XMLDir.0.StartWithListPP | 0 = Editor 1 = List | Start mode | ||
Web-interface: Settings - Online directories - XML | ||||
Web-interface: Settings - System - Web configurator | ||||
Change password | ||||
WebUIAccounts.1.Password | Change Password > New password (Admin) | |||
CLI access via ssh | ||||
DmGlobal.0.CliPassword | CLI Password (Admin): Enter a password for the administrator access to the configuration via SSH. Value: min. 8, max. 74 characters | |||
Web-interface: Settings - System - Provisioning and configuration | ||||
Provisioning and configuration | ||||
Provisioning.global.ProvisioningServer | max. 255 characters | Provisioning server: Enter the URL of your provisioning server in the text field. | ||
Web-interface: Settings - System - Security | ||||
Certificates | ||||
0 = No | Accept all certificates: Mark the Yes radio button, If you want to accept all certificates. | |||
HTTP Authentication | ||||
Security.global.HTTPAuthUsername | Max. 74 characters | HTTP Authentication: Enter the user name for HTTP authentication. | ||
Security.global.HTTPAuthPassword | Max. 74 characters | HTTP Authentication: Enter the password for HTTP authentication | ||
Web-interface: Settings - System - System log | ||||
DmGlobal.0.SysLogEnable | 0: Off 1: On | Activate system log: | ||
DmGlobal.0.SysLogServer | max. 240 characters | Server address: Enter the IP address or the (fully qualified) DNS name of your Syslog server. Value: | ||
DmGlobal.0.SysLogServerPort | Range: 1-65535; Default: 514 | Server port: Enter the port number, where the Syslog server expects to receive requests. | ||
StateInfo.global.DebugLevelMask | DWE | D = debug W = warning E = error I = info T = test | ||
SNMP manager address: Enter the IP address of the SNMP manger. | ||||
SNMP manager port: Enter the port number | ||||
Web-interface: Settings - System - Date and time | ||||
Date and time | ||||
DmGlobal.0.NtpServer Fcod | Time server: There are some common time servers preset in the field. Enter your preferred time server in the text field. Multiple time servers can be entered separated by commas. Value: max. 255 characters | |||
DmGlobal.0.TimeZone |
| Time Zone: | ||
DmGlobal.0.NtpEnableLocalServer | 0 = No 1 = Yes | Act as Local Time Server: You can determine the internal time server to act as local time server for your network. | ||
Web-interface: Settings - System - Firmware | ||||
System firmware | ||||
FwUpdateUrl must be placed in <oper.. see wiki | URL to firmware file: In the text field specify the URL of the configuration server where the firmware is located | |||
FwUpdateStart must be placed in <oper.. see wiki | 0 = Immediately Unix time stamp | Planned schedule: | ||
Settings - System - DECT settings | ||||
Eco DECT | ||||
DECT Radiation power: Set the DECT radiation power to your needs: | ||||
DECT security settings | ||||
DECT Encryption: Activate/deactivate the option. | ||||
Enhanced Security - Early Encryption and Re-Keying: Activate/deactivate the option | ||||
Enhanced Security - Automatic release for non-encrypted calls: Activate/deactivate the option. | ||||
DECT Radio settings | ||||
DmGlobal.0.SystemRegDomain | EUR = Europa LAM = Latin America BRA = Brazil | DECT Radio band: Select the radio frequency band used in your region. | ||
Hidden Parameters | ||||
DmGlobal.0.bLedSignallingActive | 0 = LED's off 1 = LED's on | Possibility to turn the LED's on the base Off or On. | ||
DmGlobal.EnableDFFlagForSipPackets |