The N870 has one hardware, the device can have the following role.

DECT Base

  • By default, the device is a DECT Base.
  • A DECT base has no web-interface
  • If the device is configured as DECT Manager, you can reset this device to Base via: Web-interface: Settings - System - Reboot and reset - Reset to Base only.
  • Via the hardkey, see: FAQ N870 - Installation
  • Via the Power procedure, see: FAQ N870 - Reset to factory default

DECT Manager + DECT Base

  • Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - dynamic IP.
  • Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - keep IP.
  • Via the hardkey, see: FAQ N870 - Installation
  • Via the Power procedure, see: FAQ N870 - Reset to factory default

Integrator + DECT Manager + DECT Base

Integrator + DECT Manager

  • Web-interface:Settings - DECT Manager - Administration - Edit DECT manager - change Capacity to Medium.
  • Web-interface:Settings - Base stations - Administration - Edit Local Basestation - Activate base station to No.

DECT Manager