uaCSTA Call Control Profile (See document below)PlatformsGigaset Requirement

Estos3CX






ServicesN670/870

Yealink

SnomMitelN670/870

Swyx

Prio

3CX

Mondago

(Advanced)

SnomPrio

 The following CSTA services are included in the Basic uaCSTA Call Control Profile:












Alternate Call – Places an existing call on hold and retrieves a previously held call at a UA.


2
(tick)

2


Answer call – Answers an alerting call at a UA.


11(tick)(tick)1


Clear Connection – Clears a connection at a UA.


11(tick)(tick)1


Conference Call - Initiate a conference via a remote controlling client


4

(tick)3


Single Step Conference Call – Adds another device to an existing call at a UA in one step.








(tick)4


Consultation Call – Places an existing call on hold at the UA and initiates a new call from the UA.


4
(tick)(tick)4


Deflect Call – Moves a connection away from a deflecting UA. A deflecting UA is no longer involved with the call after the Deflect Call service is completed.


3
(tick)(tick)3


Hold Call – Holds a call at a holding UA.


22(tick)(tick)3


Make Call – Makes a call from an originating UA.


11(tick)(tick)1


Reconnect Call – Clears an existing connected call and retrieves a call on hold at a UA.





4
(tick)(tick)4


Retrieve Call – Retrieves a call at a retrieving UA.


22(tick)
2


Single Step Transfer – Transfers a call to another device in a single step. A transferring UA is no longer involved with the call after the Single Step Transfer service is completed.


1
(tick)(tick)1


Transfer Call – Merges two calls at the UA into one call. As a result of the Transfer, the device is no longer involved with the call.


3
(tick)(tick)3


Monitor Start – Establishes a device-type monitor on a UA.



1(tick)(tick)?


Monitor Stop – Terminates an existing monitor.




(tick)(tick)?


Set Forwarding - Set device Call Forwarding settings via controlling Client


1

(tick)2


Get Forwarding - Inform the controlling Client about the device call forwarding setting


1

(tick)2


Set DND - Set device DND settings via controlling Client


11
(tick)1


Get DND - Inform the controlling Client about the device DND setting


1

(tick)1


GenerateDigits - Dial DTMF Tones during a call via a remote controlling client


1

(tick)1


DialDigits - Dials the digital tones for a phone call.









Monitoring Services and Events - Receive all call information in real time in regards to the feature mentioned above





1

(tick)1


Set Speaker Mute – Sets the speaker mute feature status at a UA. This is a CSTA physical device feature












Set Speaker Volume – Sets the speaker volume feature status at a UA. This is a CSTA physical device feature












SystemRegister - Subscribes to notifications of configuration changes.





(tick)


SystemRegisterCancel - Unsubscribes from notifications for configuration changes.









Snapshotdevice - Consistency check


Prio ?1
(tick)?


SnapShotCall - Consistency check









DirectedPickupCall - Picks up a call from another participant









GetSwitchingFunctionDevices - Checks the configured identities.











RequestSystemStatus - Checks the telephone status.








Events











The following CSTA events are included in the Advanced uaCSTA Call Control Profile:












Originated – For an outbound call, indicates that an originating UA is connected to the call.





Prio ?
(tick)(tick)?


Connection Cleared – Indicates that a UA has disconnected from a call.





Prio ?
(tick)(tick)?


Delivered – Indicates that a call is alerting a UA.





Prio ?
(tick)(tick)?


Diverted – Indicates that a UA has redirected a call to another device and is no longer involved with the call.





Prio ?
(tick)(tick)?


Established – Indicates that a UA has answered or has been connected to a call.





Prio ?
(tick)(tick)?


Failed – Indicates that a call cannot be completed (e.g. call has encountered a busy device).





Prio ?
(tick)(tick)?


Held – Indicates that a call at a UA is on hold.





Prio ?
(tick)(tick)?


Network Reached – For an outbound call, indicates that a call has been connected to an external network via a Network Interface Device.







(tick)



Retrieved – Indicates that a call at a UA has been retrieved.





Prio ?
(tick)(tick)?


Service Initiated – Indicates that a call is prompting the originating UA to go off hook (part of a CSTA Make Call service) or the UA is requesting service.





Prio ?
(tick)(tick)?


Transferred – Indicates that a call at the UA has been transferred to another location.





Prio ?
(tick)(tick)?


Conferenced – Indicates that a conference call has been created at a UA.





Prio ?

(tick)?


Do Not Disturb – Indicates that the DND feature status has changed at a UA.








(tick)?


Forwarding – Indicates that the forwarding feature status has changed at a UA








(tick)?


Speaker Mute – Indicates that the speaker mute feature status has changed at a UA.









?


Speaker Volume – Indicates that the speaker volume feature status has changed at a UA.









?


DigitsGenerated








(tick)?


OutOfService








(tick)?


BackInService








(tick)?