= supported= supported and tested= Not supported
uaCSTA Call Control Profile (See document below)Platforms

Estos3CXMondago

ServicesN670/870
2.17.2

Yealink

SnomMitelN670/870N670/870

 The following CSTA services are included in the Basic uaCSTA Call Control Profile:







Alternate Call – Places an existing call on hold and retrieves a previously held call at a UA.



Answer call – Answers an alerting call at a UA.






Clear Connection – Clears a connection at a UA.





Conference Call - Initiate a conference via a remote controlling client



Single Step Conference Call – Adds another device to an existing call at a UA in one step.






Consultation Call – Places an existing call on hold at the UA and initiates a new call from the UA.





Deflect Call – Moves a connection away from a deflecting UA. A deflecting UA is no longer involved with the call after the Deflect Call service is completed.





Hold Call – Holds a call at a holding UA.





Make Call – Makes a call from an originating UA.



Reconnect Call – Clears an existing connected call and retrieves a call on hold at a UA.








Retrieve Call – Retrieves a call at a retrieving UA.





Single Step Transfer – Transfers a call to another device in a single step. A transferring UA is no longer involved with the call after the Single Step Transfer service is completed.



Transfer Call – Merges two calls at the UA into one call. As a result of the Transfer, the device is no longer involved with the call.





Monitor Start – Establishes a device-type monitor on a UA.



Monitor Stop – Terminates an existing monitor.



Set Forwarding - Set device Call Forwarding settings via controlling Client



Get Forwarding - Inform the controlling Client about the device call forwarding setting



Set DND - Set device DND settings via controlling Client



Get DND - Inform the controlling Client about the device DND setting



GetMessageWaitingindicator






GenerateDigits - Dial DTMF Tones during a call via a remote controlling client



DialDigits - Dials the digital tones for a phone call.



Monitoring Services and Events - Receive all call information in real time in regards to the feature mentioned above






Set Speaker Mute – Sets the speaker mute feature status at a UA. This is a CSTA physical device feature






Set Speaker Volume – Sets the speaker volume feature status at a UA. This is a CSTA physical device feature






SystemRegister - Subscribes to notifications of configuration changes.



SystemRegisterCancel - Unsubscribes from notifications for configuration changes.



Snapshotdevice - Consistency check



SnapShotCall - Consistency check



DirectedPickupCall - Picks up a call from another participant



GetSwitchingFunctionDevices - Checks the configured identities.





RequestSystemStatus - Checks the telephone status.


Events






The following CSTA events are included in the Advanced uaCSTA Call Control Profile:







Originated – For an outbound call, indicates that an originating UA is connected to the call.






Connection Cleared – Indicates that a UA has disconnected from a call.






Delivered – Indicates that a call is alerting a UA.






Diverted – Indicates that a UA has redirected a call to another device and is no longer involved with the call.






Established – Indicates that a UA has answered or has been connected to a call.






Failed – Indicates that a call cannot be completed (e.g. call has encountered a busy device).






Held – Indicates that a call at a UA is on hold.






Network Reached – For an outbound call, indicates that a call has been connected to an external network via a Network Interface Device.






Retrieved – Indicates that a call at a UA has been retrieved.






Service Initiated – Indicates that a call is prompting the originating UA to go off hook (part of a CSTA Make Call service) or the UA is requesting service.






Transferred – Indicates that a call at the UA has been transferred to another location.






Conferenced – Indicates that a conference call has been created at a UA.






Do Not Disturb – Indicates that the DND feature status has changed at a UA.






Forwarding – Indicates that the forwarding feature status has changed at a UA






Speaker Mute – Indicates that the speaker mute feature status has changed at a UA.






Speaker Volume – Indicates that the speaker volume feature status has changed at a UA.






DigitsGenerated






OutOfService






BackInService