View Source

In some situations you would like to have the possibility to load multiple provisioning files.

First file with general settings
Second file with device specific settings
If required more files then 2 can be used

The device receives an provisioning URL to download the first file.

?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="mx3b">

  <firmware>
    <!-- <file version="2.22.4" url="http://192.168.178.200/firmware/maxwell3/GC_MAX_2.22.4-pre-release.bin" flags="FORCE_ACCEPT"/> -->
  </firmware>
  
  <nvm>
    
    <!-- SIP -->

    <param name="SIP.DefaultAccount" value="0" />
    <param name="SIP.Account.0.AccountName" value="1012" />
    <param name="SIP.Account.0.Active" value="1" />
    <param name="SIP.Account.0.Provider" value="PBX" />
    <param name="SIP.Account.0.AuthName" value="1012" />
    <param name="SIP.Account.0.AuthPassword" value="password" />
    <param name="SIP.Account.0.DisplayName" value="1012" />
    <param name="SIP.Account.0.Username" value="1012" />
    <param name="SIP.Account.0.Domain" value="192.168.178.210" />
    <param name="SIP.Account.0.CallWaiting" value="1" />
    <param name="SIP.Account.0.ProxyServer.Address" value="192.168.178.210"/>
    <param name="SIP.Account.0.ProxyServer.Port" value="5060" />
    <param name="SIP.Account.0.RegistrationServer.Address" value="192.168.178.210"/>
    <param name="SIP.Account.0.RegistrationServer.Port" value="5060"/>
    <param name="SIP.Account.0.OutboundProxy.Mode" value="2"/>
    <param name="SIP.Account.0.OutboundProxy.Address" value=""/>
    <param name="SIP.Account.0.OutboundProxy.Port" value="5060"/>
    <param name="SIP.Account.0.FailoverServer.Enabled" value="0"/>
    <param name="SIP.Account.0.CLIPSource" value="2"/>
  
</nvm>
  
  <custom>
        <step type="Redirect" url="http://192.168.178.201/maxwelltemplate2.xml" />
  </custom>
  
</provisioning>

The Parameter: <step type="Redirect" url="http://192.168.178.201/maxwelltemplate2.xml" />

Contains the URL to the second provisioning file.

URL can contain:

Name of the file (Example: test_second.xml)
%MACD.xml (%MACD will be replaced with own MAC address)

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="mx3b">

  <nvm>
    <param name="SIP.Account.0.DisplayName" value="1012_3" />
 
  </nvm>
  

</provisioning>