Different (call-based) alarms, including sensory alarms, can be triggered in Basic Mode. An alarm destination entered in the handset can be selected in the event of alarms. Three alarm destinations are possible.

In order to ensure that alarm calls reach the alarm destination as reliably as possible, the alarm calls are repeated until the configured number of retries has been reached or the alarm retry has been interrupted manually on the handset. Despite alarm retries, it cannot be fully guaranteed that an alarm call will reach the programmed alarm destination.


Note

A call connection must be established to enable operation of the second and third emergency call/alarm number when the handset has registered on the Gigaset Nx70. All other systems only support dialing of one emergency call or alarm number.

The functionality of the emergency and alarm numbers in the handset must be checked after the configuration.

If a pre-alarm is signaled during a call, you have to first confirm the pre-alarm in order to prevent the pending alarm. You can then continue the call.

  • No labels