You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »

Introduction

Do not use the preconfigured SIP server port numbers (5060), if you want to make use of SIP server redundancy (“Locating SIP server with DNS according to RFC3263).
Background is RFC 3263: "...If the TARGET was not a numeric IP address, but a port is present in the URI, the client performs an A or AAAA record lookup of the domain name...."

N510 software version >=240

In the web-interface go to: Settings - Telephony - Connections - DNS SRV Lookup

Provisioning ParameterValue

SIP account 1:

BS_IP_Data1.ucB_SIP_USE_LOOKUP=0x1

Possibility to hide in web-interface:
BS_IP_Data1.ucB_SIP_USE_LOOKUP..attr=0x0

0x0 = No

0x1 = Yes

SIP account 2:

BS_IP_Data1.ucB_SIP_USE_LOOKUP_2=0x0

Possibility to hide in web-interface:
BS_IP_Data1.ucB_SIP_USE_LOOKUP_2..attr=0x0

0x0 = No

0x1 = Yes

SIP account 3:

BS_IP_Data1.ucB_SIP_USE_LOOKUP_3=0x0

Possibility to hide in web-interface:
BS_IP_Data1.ucB_SIP_USE_LOOKUP_3..attr=0x0

0x0 = No

0x1 = Yes

SIP account 4:

BS_IP_Data1.ucB_SIP_USE_LOOKUP_4=0x0

Possibility to hide in web-interface:
BS_IP_Data1.ucB_SIP_USE_LOOKUP_4..attr=0x0

0x0 = No

0x1 = Yes

SIP account 5:

BS_IP_Data1.ucB_SIP_USE_LOOKUP_5=0x0

Possibility to hide in web-interface:
BS_IP_Data1.ucB_SIP_USE_LOOKUP_5..attr=0x0

0x0 = No

0x1 = Yes

SIP account 6:

BS_IP_Data1.ucB_SIP_USE_LOOKUP_6=0x0

Possibility to hide in web-interface:
BS_IP_Data1.ucB_SIP_USE_LOOKUP_6..attr=0x0

0x0 = No

0x1 = Yes

 

N510 software version < 240

In the web-interface go to: Settings - Telephony - Connections 

Make sure that the port numbers are empty, see the picture below.

  • No labels