You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Introduction

Regular updates to the firmware for the DECT manager and base stations can be found on this wiki. You can upload these updates onto the DECT manager as required.


Info

If you upload the firmware via the web-interface, the base stations‘ firmware is updated automatically by the DECT manager. This means that the DECT manager acts like a "proxy" for the base stations.

Web-interface

Upload the software via the web-interface:

The firmware is stored on the DECT manager and distributed to the base stations.

In the web-interface go to: SETTINGS - System - Firmware

FAQ N870 - Firmware update

  • Click Browse... and select the firmware file from your computer‘s file system.
  • Click Upload to upload the firmware file.
  • When ready, the pop-up "Press SET to start update schedule" will appear.
    The URL to the firmware file will change to the local storage: http://localhost/swupdate/<firmwarefile>
  • Select Immediately if you want to start the update now.
  • Scroll down and press SET
  • The firmware update will start after a few minutes.


You can downgrade to the previous version and keep your settings. If you downgrade to any other version, your device will be factory default


Firmware update from an HTTP server

If you do not have the file on your PC, you can also enter the URL of the firmware that is stored on an external HTTP server. When the firmware update is started, the devices will download the firmware from this external server.




Current version

Shows the current firmware version of the Integrator/DECT manager on which you are logged in.

  • Click Browse... and select the firmware file from your computer‘s file system.




  • No labels