Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Valid for N610 / N670 / N870 / N870E.

When using the phonebook lookup feature, by default with every incoming call the device will do a phonebook lookup to match the incoming number with a name.

This can cause load on the server hosting the phonebooks. To reduce the load and have a faster name presentation we have the following options.

  1. From software 2.52: If CNIP is available do not start a lookup
  2. Caching with the options listed below

CNIP has priority over lookup

From software 2.52 we have implemented that if CNIP information is available, we do not do an Lookup.

This can be disabled via:

  • Auto-provisioning
  • Web-interface (Software 2.57.0 or higher)

Provisioning

Provisioning example how to change the behavior.
<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>
		<!-- 1 = Enabled (Default), 0 = Disabled -->
        <param name="DmGlobal.0.CNIPOverAutolookup" value="0" />
    </nvm>
</provisioning>

Web-interface:

In the web-interface go to: Settings - Mobile devices - Administration


Caching

Parameter

Netdir.<x>.CachingType

For value x see: FAQ - Directories number list

Example for LDAP (x=0):

<param name="Netdir.0.CachingType" value="1"/>

Value
0Buffer entries (For cache size see below)
1ask every lookup (Default)
2refresh after 15 minutes
3refresh after 1 hour
4refresh after 6 hour
5refresh after 12 hour
6refresh after 18 hour
7refresh after 1 day
8refresh after 2 days
9refresh after 3 days
10refresh after 5 days
11refresh after 1 week


The Cache Size is default 100 entries.

Parameter
DmGlobal.0.LookupCacheSize

<param name="DmGlobal.0.LookupCacheSize" value="100"/>

0Minimum Value
100Maximum Value



These settings can only be changed via auto-provisioning.

  • No labels