Introduction

The Fusion can connect to the local network via:

  • Ethernet (2x Gbit ports, PoE support)
  • Wi-Fi (802.11 ac dual band)


  • When the Fusion is connected to the network via Wi-Fi, it is not possible to use the Ethernet ports.
  • Wi-Fi is a shared network with other Wi-Fi clients, when the Wi-Fi network is used by high bandwidth applications (gaming/video/..) or there is interference from other Wi-Fi networks it can have an negative influence on Voice Calls. The solution is then to switch to Ethernet instead of Wi-Fi.
Web-interface

Open the web-interface and go to: Settings - Network - Wi-Fi

Enable Wi-Fi

When enabled, you will see the available Wi-Fi networks, select the network you want to use. 

or Click on  to add the network manually.

Fusion MMI

On the Fusion device go to: Menu - Settings - Network

Select Wi-Fi

Enter the admin password

Select the network you want to use or click  to Add the network manually 

  • No labels