Introduction



Open the web-interface of the Maxwell 3 / Basic and go to: Settings - Network - IP



Settings
FeatureValueDescription
Device name in networkMaxwell
Network typeIPv4Select the protocol that is used in your network , IPv4 only
IP address typeStaticSelect Static if your device has a fixed IP address

DynamicSelect Dynamic if your device receives the IP address via a DHCP server
IP address
Enter an IP address for your phone
Subnet mask
The subnet mask specifies how many parts of an IP address the network prefix must comprise
Standard gateway
Enter the IP address for the standard gateway through which the local network is connected to the Internet
Preferred DNS
Enter the IP address for the preferred DNS server
Alternate DNS
Enter the IP address for the alternate DNS server that should be used when the preferred DNS server cannot be reached
Auto provisioning
ParameterDescription
NET.General.DeviceNameInNetworka-z, A-Z, 0-9, -
NET.LAN.IP.DHCP.Enabled

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address
NET.IP.IPv4.SubnetMask
NET.IP.IPv4.StandardGateway
NET.IP.IPv4.PreferredDNSServer
NET.IP.IPv4.AlternateDNSServer









  • No labels