Page tree
Skip to end of metadata
Go to start of metadata


From software 245 we have implemented the usage of client certificates when using secure provisioning.

To use this feature, it must be enabled first.

For this we created a patch that you can install via the restore function in the device. (Settings – management – Save and Restore)  

After the restore, the device will:

  • Reboot
  • After boot, the device generates the Client certificate in the background
  • This takes about 5 minutes
  • Then automatic without an extra reboot, the client certificate can be used.

You can not see if the certificate generation is ready, just wait for 5 minutes.

It will not change or delete any other existing parameters, only the client certificate will be enabled.

  • No labels