Due to planned upgrade JIRA/Confluence may not be available on 30th October 2021 from 10am to 6pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree
Skip to end of metadata
Go to start of metadata

Introduction

To improve the service and after sales support, in the N720 software 89 or higher we have implemented the new feature: Visualisation of sync chains.

This new feature will provide you with a graphical overview of the Base station synchronisation chains and the RSSI value from the slave to the Master Base station.

 

Important

Measurements shown in this diagram are for orientation only. To determine exact values use the professional Gigaset N720 SPK (Site Planning Kit).

 

Status page:

On the Status page, you can click on the Base station to open the graphical overview (Allow Popups).

 

 

 

 

 

 

 

 

 

 

 

The screen below will be shown and will provide you with the overview of the Base station and how this base can see the surrounding base stations.

When you click on the icon: then you will get the overview about the Synchronisation levels and when your mouse moves over a base station, additional information like the RSSI value is shown.

 

The values are the current signal values and can/will change the next time you will create another overview.

Legend

Connections between base stations

RSSI range (1-255)

 Signal quality

Filled grey line

109 < range <= 255

 Excellent-Good

Red dotted line

0 < range <= 109

 Poor

No line

See below

 no data

Remarks:

  • Line is not drawn when there is no data available for given connection
  • Values determining range limit are not constant. The measurements shows fluctuating data.
  • Graphics and values can be treated only as a warning that signal strength is below the system requirements and advice to perform some measurements with equipment dedicated for such purposes: e.g. Gigaset N720 SPK (Site Planning Kit).
     

 

  • No labels