Page History

The N870 has one hardware, the device can have the following role. Image Added

DECT Base (N870 only)

• By default, the device is a DECT Base.
• A DECT base has no web-interface
• If the device is configured as DECT Manager, you can reset this device to Base via: Web-interface: Settings - System - Reboot and reset - Reset to Base only.
• Via the hardkey, see: FAQ N870 - Installation
• Via the Power procedure, see: FAQ N870 - Reboot and Reset to factory default

DECT Manager + DECT Base (N870 & N670)

• Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - dynamic IP.
• Web-interface: Settings - System - Reboot and reset - Reset to DECT-Manager + Base - keep IP.
• Via the hardkey, see: FAQ N870 - Installation
• Via the Power procedure, see: FAQ N870 - Reboot and Reset to factory default

Integrator + DECT Manager + DECT BaseBase (N870 & N670)

• Web-interface: Settings - System - Reboot and reset - Reset to All in one - dynamic IP.
• Web-interface: Settings - System - Reboot and reset - Reset to All in one - keep IP.
• Via the hardkey, see: FAQ N870 - Installation
• Via the Power procedure, see: FAQ N870 - Reboot and Reset to factory default

Integrator + DECT Manager (N870 only)

• Web-interface:Settings - DECT Manager - Administration - Edit DECT manager - change Capacity to Medium.
• Web-interface:Settings - Base stations - Administration - Edit Local Basestation - Activate base station to No.
  
• 
  

DECT Manager (N870 only)

• Configure the device as DECT Manager + DECT Base via the above procedure.
• Connect to the virtual integrator.
• Via the integrator switch of the DECT base:

  • Web-interface:Settings - DECT Manager - Administration - Edit DECT manager - change Capacity to Medium.
    Web-interface:Settings - Base stations - Administration - Edit Local Basestation - Activate base station to No.