Versions Compared

Old Version 6

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 7

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section

Introduction

Image Removed

Open the web-interface of the Maxwell 3 / Basic and go to: Settings - Network - IP 
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

FAQ Maxwell 3 / Basic: Network - IP

FAQ Maxwell 3 / Basic: Network - IP
Column
width70%
Section
    

 

section 
Panel
titleColor
#F85404
titleBGColor
#F0F0F0
titleSettings
FeatureValueDescription
Device name in networkMaxwell
 

Network typeIPv4Select the protocol that is used in your network
()
 IPv6 
, IPv4
or IPv6
only
IP address typeStaticSelect Static if your device has a fixed IP address
 

DynamicSelect Dynamic if your device receives the IP address via a DHCP server
IP address
 

Enter an IP address for your phone
Subnet mask
 

The subnet mask specifies how many parts of an IP address the network prefix must comprise
Standard gateway
 

Enter the IP address for the standard gateway through which the local network is connected to the Internet
Preferred DNS
 

Enter the IP address for the preferred DNS server
Alternate DNS
 

Enter the IP address for the alternate DNS server that should be used when the preferred DNS server cannot be reached

 

 

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto provisioning
ParameterDescription
NET.General.DeviceNameInNetworka-z, A-Z, 0-9, -
NET.LAN.IP.DHCP.Enabled

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address
NET.IP.IPv4.SubnetMask
NET.IP.IPv4.StandardGateway
NET.IP.IPv4.PreferredDNSServer
NET.IP.IPv4.AlternateDNSServer
Column
width30%
toc