Versions Compared

Old Version 3

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 4

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto-provisioning
Info
iconfalse
titleProvisioning template

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<!-- Provisioning file for N610: deactivate enhanced DECT settings, that are not supported by a transparent repeater -->
<!-- Encryption Off -->
<param name="DmGlobal.0.DECTCipherDisable" value="1" />

<!-- enhanced Encryption Off , for consistency -->
<param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />

<!-- Cf 0=off=Base confirms to Cs, advanced bearer setup decision by handset not affected ;-( until Domino/Stromberg 0x87=On8Segments-->
<param name="DmGlobal.0.DECTCfSettings" value="0x00" />

<!-- wideband off : handset needs 40s asynchronity (by reboot) to learn this!!! -->
<param name="DmGlobal.0.WidebandEnabled" value="0" />

<!-- DECTBlindslots 0x0aaa for even slots; 0x0fff for all slots -->
<param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />

</nvm>

</provisioning>

Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titlePARI

Using first manual generated N610 the repeater was not working.

The issue was caused due to wrong PARI.

Image Added

Check if your PARI starts with "0" like above. With the sample, the PARI started with "1".

The PARI needs to be changed to solve the problem.