Page History

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>
  <!-- Provisioning file for N610:
        deactivate enhanced DECT settings,
        that are not supported by a transparent repeater -->
  
        <!-- Since V2.50.0 defaults local base of ARI-Class A (N610) to 0,-->
        <!-- repeater-support needs to swap RPN of local base to 1!-->
        <!-- 
		<!-- ATTENTION: DO NOT apply this provisioning xml to Nx70 system!!!-->
    
		<param name="dm.local.LocalBaseRpn" value="1"/>
    
    <!-- The following  provisioning command could apply to 'all'base stations of cingle cell system,-->
    <!-- but MUST NOT apply to ALL base stations of Nx70 system,-->
    
    	<!-- Wildcard provisioning is not immediately synchronized to table of ConfirmedBaseStations!!! -->
    	<!-- So please replace wildcard '@' by mac address of your N610, or reboot the base after successful provisioning. -->
    	<param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" />
      
	    <!-- Encryption Off -->
        <param name="DmGlobal.0.DECTCipherDisable" value="1" />
		
	    <!-- enhanced Encryption Off , for consistency -->
        	<param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />

	    <!-- Cf 0=off=Base confirms to Cs, advanced bearer setup decision by handset not affected ;-( until Domino/0x87=On 8Segments-->
        	<param name="DmGlobal.0.DECTCfSettings" value="0x00" />
		
	    <!-- DECTBlindslots 0x0aaa for even slots; 0x0fff for all slots -->
        	<param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />
        
	    <!-- wideband off : handset needs 40s asynchrony (by reboot) to learn this!!! -->
        <param name="DmGlobal.0.WidebandEnabled" value="0" />
    
	</nvm>
</provisioning>