Versions Compared

Old Version 25

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 26

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto-provisioning

(warning) DO NOT apply following provisioning file to any N670/N870/N870E.

Following provisioning file does apply RPN=1 to all base stations of a single cell system, so to the one and only local base.

Wildcard provisioning does not automatically synchronize settings for all 'ConfirmedBaseStations'!

Reboot is needed after successful provisioning to get this synchronized.


Code Block
languagexml
titleProvisioning template
<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>

		<!-- ATTENTION: DO NOT apply this provisioning xml to N670/N870 system!!! It will break your N670/N870 system-->
    
		<param name="dm.local.LocalBaseRpn" value="1"/>
    
    	<!-- Wildcard provisioning is not immediately synchronized to table of ConfirmedBaseStations!!! -->
    	<!-- So please replace wildcard '@' by mac address of your N610, or reboot the base after successful provisioning. -->
    	<param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" />
    	
		<param name="DmGlobal.0.DECTCipherDisable" value="1" />
    	<param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />
    	<param name="DmGlobal.0.DECTCfSettings" value="0x00" />
    	<param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />
    	<param name="DmGlobal.0.WidebandEnabled" value="0" />
    
	</nvm>
</provisioning>

Examples of provisioning files


Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleHow to check in Web-UI and with handset MMI?

DECT Settings → DECT Encryption, early Encryption and re-keying is disabled to support transparent repeater operation.

Telephony → Audio → Wideband Support must stay decativated to support transparent repeater operation:


With handset you could check the RPN in the RFP-Scan procedure

Image Modified


If repeater support is deactivated RPN ends with '0' or '8'.

If repeater support is activated RPN ends with '1' or '9'.

Repeater might show up in RFP-scanning with RPN ending with '2..7' or 'a..f'.


Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titlePARI of Class A neededConnect the repeater

When the above is done, the next step is to connect the repeater.

  • Open the web-interface of the N610.
  • Go to SETTINGS - Mobile devices - Registration Centre and click on Start now
  • Set the repeater in registration mode FAQ Repeater - Registration
  • All is successful when the left LED is constantly green
Several handset implemented rules ( sometimes just tuning, sometimes hard requirements ),
need DECT PARI of class A ( starting with '0' ), to best interop with repeaters, especially of the rather old generation.
Image RemovedSome very early samples were equipped with PARI of class B starting with '1'.
Please return such sample back to headquarter for replacement by correct sample.