Versions Compared

Old Version 40

changes.mady.by.user Lenfort, Christoph

Saved on

compared with

New Version 41

changes.mady.by.user Lenfort, Christoph

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto-provisioning

(warning) DO NOT apply following provisioning file to any N670/N870/N870E.

Following provisioning file does apply RPN=1 to all base stations of a single cell system. In singlecell system, so to the one and only local base.

(warning) DO NOT apply following provisioning file to any N670/N870/N870E.

Info
titleHow to use provisioning file for to enable transparent repeater operation:
  • Provisioning is not atomic!
  • Wildcard-provisioning
does not automatically synchronize settings for all 'ConfirmedBaseStations'!
  • even more is not atomic!
  • Some settings depend on the other!

So the fully safe procedure to apply this provisioning file is to apply the provisioning twice:

  1. Upload this provisioning file via web-ui.
  2. "Start auto configuration", should be successful, confirm by OK!
  3. "Start auto configuration", should be successful, confirm by OK!
  4. Reboot the device. 
Reboot is needed after successful provisioning to get this synchronized.



Code Block
languagexml
titleProvisioning template
<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>
 
        <!-- ATTENTION: DO NOT apply this provisioning xml to N670/N870 system!!! It will break your N670/N870 system-->

<!-- Provisioning is not atomic! ===========================================
 Provisioning is not atomic!
 Wildcard-provisioning even more is not atomic!
 Some settings depend on the other!
 So the fully safe procedure to apply this provisioning file is to apply the provisioning twice:
 1. Upload this provisioning file via web-ui.
 2. "Start auto configuration", should be successful, confirm by OK!
 3. "Start auto configuration", should be successful, confirm by OK!
 4. Reboot the device.
-->
        <param name="dm.local.LocalBaseRpn" value="1"/>
        <param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" />
<!-- ======================================================================== -->

<!-- MAC address in lower case, without ':' separator =======================
If you want to prevent wildcard provisioning, 
you need to give the MAC address of the local base,
without ':' separators and in lower case letters:
        <param name="dm.local.LocalBaseRpn" value="1"/>
        <param name="ConfirmedBaseStations.0x589ec6123456.ucRpnIndex" value="0x1" />
======================================================================== -->
        <param name="DmGlobal.0.DECTCipherDisable" value="1" />
        <param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />
        <param name="DmGlobal.0.DECTCfSettings" value="0x00" />
        <param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />
        <param name="DmGlobal.0.WidebandEnabled" value="0" />
        <param name="DmGlobal.0.DECTDSAA2" value="0" />
		
    </nvm>
</provisioning>

Examples of provisioning files

...