Versions Compared

Old Version 6

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 7

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Select the Additional Features icon in the main menu.
  2. Select Alarm Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select M anual Manual Alarm.
  7. Change the values of the following parameters:

Some menus are missing
ParametersBasic modeAlarm modePNG mode

Short press Alarm Key

Short press

OnOnOn

Long press Alarm Key

OnOnOn

Multiple press Alarm Key

OffOffOff
Keypad LockedKey activeKey activeKey active
DelaySP pre-alarm Time

0 sec.

<10<0-900 300 sec>

Step 15

0 sec.

<10<0-900 300 sec>

Step 15

0 sec.

<10-90 sec>

Step 10

SP pre-alarm Melody

34 DR1

34 DR1

34 DR1

SP pre-alarm Volume

50

50

50

SP Alarm Melody

On

On

On

SP Alarm MelodyMelody SP Alarm 5Alarm 5Alarm 5
SP Alarm Melody Volume100100100
LP pre-alarm Time

0 sec.

<0-300 sec>

Step 15

0 sec.

<0-300 sec>

Step 15

0 sec.

<10-90 sec>

Step 10

LP pre-alarm Melody

34 DR1

34 DR1

34 DR1

LP pre-alarm Volume

50

50

50

LP Alarm Melody

On

On

On

LP Alarm MelodyAlarm 6Alarm 6Alarm 6
LP Alarm Melody Volume310033
100100


Non Movement Alarm

The Non Movement Alarm can be activated optionally. It is triggered if the sensors identify lack of movement over a defined configurable period of time.

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Time Alarm.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
ActivationOffOffOff
Response Time

15 min.

<1-120 min.>

15 min.

<1-120 min.>

15 min.

<1-15 min.>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-15 sec>


Escape Alarm

The Escape Alarm can be activated optionally. It is triggered if the sensors identify undue violent movement of the handset over a defined configurable period of time.

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Escape Alarm.
  7. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
ActivationOffOffOff
Response Time

30 sec.

<10-900 sec>

30 sec.

<10-900 sec>

30 sec.

<10-90 sec>

Pre-alarm Time

15 sec.

<0-300 sec>

15 sec.

<0-300 sec>

15 sec.

<0-30 sec>

Sensitivity levelHighHighHigh


Alarm Signal

You can define the acoustic signaling of pre-alarms and alarms here. The following signals start quietly and reach their configured maximum value after a short time.

...

  1. Select the Additional Features icon in the main menu.
  2. Select Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select Alarms.
  6. Select Alarm Signal.
  7. Select Pre-alarm or Alarming Signal.
  8. Change the values of the following parameters:


ParametersBasic modeAlarm modePNG mode
Pre-alarm


  • Warning Signal
OnOnOn
  • Alarm Ringtone
Alarm 5Alarm 5Alarm 5
  • Volume
333
Alarming Signal


  • Alarm Signal
OnOnOn
  • Alarm Ringtone
Alarm 1Alarm 1Alarm 1
  • Volume
555