Page History

Index:

• Introduction
• Dial Plan Entries
• Substitutions
• Triggering ENUM
• Summary of extended regular expressions
• Examples for Dial Plans
  • Convert an emergency number into a SIP URL
  • Make the phone dial a number when the pound key is pressed
  • Matching an international number
  • Area codes
  • Make the phone dial a number if a certain number of digits have been reached
  • Calling a complete URI
  • Separating * codes from normal numbers
  • Leading Zeros
  • Concatenate dial plans
  • Dial a certain number with another outgoing identity
  • To change the + to 00
  • Allow calls only with a leading string

• Determine when a number is complete (e.g. ten-digit number in USA)
• Automatically convert local numbers into global numbers (e.g. dialing 398330 in Berlin, Germany gets converted into +4930398330)
• Automatically append the local domain (e.g. dialing 398330 gets converted into sip:398330@company.com;user=phone)

The phone is able to generate predefined dial plans from the user interface.

The dial plan depends on the outgoing line identity; therefore the snom phone supports multiple dial plan entries, one for each identity. Those entries are available in the SIP/Stack settings.

From a requirement point of view, dial plans are similar to the replacements known from ENUM or NAPTR. Therefore, snom built upon these mechanisms and added some more features that make them suitable for the above scenarios.

The first additional feature is that there can be more than one pattern. The patterns are separated by spaces. The first pattern which yields a match is taken.

The first part contains a pattern which is used for matching the dialed number. The second part contains the result or the dial plan step and the third (optional) part contains flags that set additional processing attributes.

The following flags are available:

• The “d” flag means that the number is complete and can be dialed. Example:“|([0-9]{5})|sip:\1@test.com|d” means that a number with five digits will be dialed automatically.

• The “i” flag means that the comparisons should be done case-insensitive.

• The “d” replacement inserts the name of the registrar.
  For example, „!*!sip:\1@\d!“ inserts the domain name behind the „@“ symbol.
  
  

• Numbers are backreferences to match-groups of the regEx part according to RFC2915.
  For example, “!(.+)!sip:\1@domain!” inserts a “sip:” before the string (which is the first match).

The ENUM handling of the phone is described in a separate document.

• To match a character, just use that character. If a character has a special meaning, it has to be escaped by the backslash character. Characters with special meaning: . ( a simple period), - (minus) or any type of brackets.

• ^ matches the beginning of a string, $ matches the end of a string

• dot („.“) matches every character.

• To match a range of characters, use [ and ] and list the characters between the brackets. Ranges can be defined by the dash symbol. Ranges can be negated by the ^ symbol (for example [^0-9] matches all characters but numbers).

• „+“, „*“, „?“ are multipliers which match at least once („+“), any number of times („*“), or does not match, and at most once („?“). Multipliers can also be explicitly stated in curly brackets, for example {5,9} means at least 5 times, at most 9 times. {5,} means at least five times, {5} means exactly five times. Without multiplier, exactly one match is expected.

• Brackets can be used to group matches (like in „(abc)?“ which matches „abc“ or the empty string).

• The „|“ can be used to indicate alternate matches (like in „a|b“ which matches a or b).

Anchor
Examples for Dial Plans Examples for Dial Plans

Anchor
Convert an emergency number into a SIP URL Convert an emergency number into a SIP URL

Convert an emergency number into a SIP URL

This pattern could look like this:

Separated by the exclamation mark, it contains the pattern for the 911 and the resulting SIP URI. The d flag indicates that there is no need to press the Ok key after dialling this number.

Anchor
Make the phone dial a number when the pound key is pressed Make the phone dial a number when the pound key is pressed

Make the phone dial a number when the pound key is pressed

The pattern could look like this:

This dial plan entry will look for a pattern ending in a pound symbol and use this as the user name in a SIP URI (not including the pound symbol).

Anchor
Matching an international number Matching an international number

Matching an international number

Just put the 011 pattern at the front of the pattern, like in

This pattern requires that the user presses the Ok key in order to start the call.

Anchor
Area codes Area codes

Area codes

Example 1:

If the phone number has digits between 3 and 6 then use an area code:

Example 2:

Use an area code all the time:

Anchor
Make the phone dial a number if a certain number of digits have been reached Make the phone dial a number if a certain number of digits have been reached

Make the phone dial a number if a certain number of digits have been reached

The following dial plan entry could be used:

This pattern will look for a number starting with 1 and followed by ten digits. It will replace it with a URI that contain the hint to try an ENUM lookup first before sending it to the proxy.

Anchor
Calling a complete URI Calling a complete URI

Calling a complete URI

This is a little bit more difficult because of the number of allowed characters in the user name. The following character can be base for such a dial plan entry

Anchor
Separating * codes from normal numbers Separating * codes from normal numbers

Separating * codes from normal numbers

This is sometimes desired e.g. a plan is needed to add a leading 0 to an outgoing number not starting with 0 e.g. 3039833104 should be dialled as 03039833104 but not 03039833104 be converted to 003039833104. One could use the following for this purpose:

But if a start code is followed by a destination e.g. *7939833452, it is not desired to convert it to 07939833452, because the pbx is expected to get the whole string and use it accordingly. Hence we can concatenate a plan to the one above to look after such exceptions:

Separated by the exclamation mark, it contains the pattern for the 911 and the resulting SIP URI. The d flag indicates that there is no need to press the Ok key after dialling this number.

Anchor
Leading Zeros Leading Zeros

Leading Zeros

If a number starts with 9 and has at least 8 further digits then use a leading Zero

If a number has 2 digits don't use a leading zero. When more than 2 digits use the leading zero

Anchor
Concatenate dial plans Concatenate dial plans

Concatenate dial plans

To concatenate dialplans just write them one after another including "" quotes. You will get after concatenating the above two dialplans.

Anchor
Dial a certain number with another outgoing identity Dial a certain number with another outgoing identity

Dial a certain number with another outgoing identity

Anchor
To change the + to 00 To change the + to 00

To change the + to 00

Anchor
Allow calls only with a leading string Allow calls only with a leading string

Allow calls only with a leading string

To allow only calls to numbers with 9 at the beginning. All other numbers will be blocked.