Introduction

Here we describe how the Sennheiser DW Office is connected to the Maxwell 10.

Connecting Base Station to the Maxwell

• Use a normal 8 pin Ethernet cable (17)
• Connect to the Sennheiser Base station Phone socket.(8)
• Connect to the Maxwell 10 EHS socket.

Sennheiser DIP switch settings

• Set the DIP switch 1 and 4 to the lower position.

Adjusting the audio signal

Image Added

• Set the ABC switch (6) to A (Default), B or C so that you can hear a clear signal.

Adjusting the Microphone sensitivity

Image Added

• To change the volume, adjust the microphone volume control accordingly