Versions Compared

Old Version 9

changes.mady.by.user van Eemeren Thijs

Saved on

compared with

New Version Current

changes.mady.by.user Bakker, Bas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Yes
Section
Panel
bgColor#FDFEFE
titleBGColor#CACFD2
titleXRC Services
Column
width25%

About XRC Services

De XRC services Group verzorgt en ontzorgt IT- en Communicatiediensten. Het unieke portfolio van de XRC services Group is ondergebracht in branchegerichte dienstenpakketten die uitsluitend via gecertificeerde partners worden verkocht.

XRC services voorziet in het leveren van advies, hardware, software en (installatie)diensten op IT & Communicatie gebied binnen verschillende branches. Of het nu gaat om de noodzakelijke dataverbindingen voor telefonie omgevingen, beveiligingssystemen, multimediadiensten, kassacommunicatie, pinautomaten, netwerkbekabeling, ICT beheer of servicediensten.

Yes 
Column
width75%

 

See below for a list with supported features when using the Gigaset PRO IP Devices on the providers network.

Supported features

Feature                                       Maxwell 10Maxwell 3Maxwell 2Maxwell basicN870 IPN720 IP
PRO
N510 IP
PRO
Software release:   2.6.322.16.
5
6  2.
33
16.
1
62.16.62.
16
12.
6
0108
243
242
Basic CallYes YesYes YesYesYesYes
Calling line (CLIP)Yes Yes 
Yes
Yes YesYesYesYes
Connected line (COLP)-1-1-1-1-1-1-1
Anonymous call-2-2-2-2-2-2-2
Do Not Disturb
Yes
Yes  YesYes YesYes--
Message waiting
Yes
Yes 
 Yes
Yes Yes YesYes
Yes 
Yes
Yes 
Yes
Call list/historyYes Yes Yes YesYesYes
Yes 
Yes
Voice mail deposit/retrieval-1-1-1-1-1-1-1
Call waitingYesYes  YesYesYesYesYes
Call Hold / ToggleYes Yes 
Yes
 YesYesYesYesYes
Call forward (CFU)-2-2-2-2-2

-2

-2
Call forward (CFNR)-2-2 -2-2-2-2-2
Call forward (CFB)-2-2-2-2-2-2-2
Call Transfer attendedYes YesYesYesYesYesYes
Call Transfer early attendedYes YesYesYesYesYesYes
Call Transfer unattendedYes YesYesYesYes--
Call completed elsewhereYesYesYesYesYesYesYes
DTMF (RFC2833)YesYesYesYesYesYesYes
Conference 3ptyYesYesYesYes--Yes
BLF Busy / Idle indicationYesYesYesYes3---
Call pick-up directYes YesYesYesYesYesYes
Call pick-up groupYes YesYesYesYesYesYes
Call pick-up BLFYesYesYesYes3---
Auto provisioningYesYesYesYes-1YesYes
SIP Security
 







SIPS
 

-2
 
-2
  
-2-2
SIPS Yes
--
SIP via TLS
 

YesYesYesYes--
SRTP
Yes
 
YesYesYes--
- Not supported by device
-1Not supported by the platform
-2Platform feature via FAC
3Via key extention module

Feature codes

 The following feature codes are supported by the platform.

code
feature
*31* numberAnonymous call to this number
*32* numberToggle Code: Enables/Disabled anonymous call for the next call On or Off (Announcement)
*32Toggle Code: Enables/Disable anonymous call for all calls On/Off (Announcement)
#32Toggle Code: Enables/Disable anonymous call for all calls On/Off (Announcement)
  


*35Toggle Code: Hotdesking to login/out on a device
*35*[int]Toggle Code: Hotdesking to login/out on a device
*35*[int]*[pin]Toggle Code: Hotdesking to login/out on a device
 
 


*100 / #100Toggle Code: Login/off in waiting queue, dependent on your previous state.
*101 / #101Login/off in all waiting queues.
*102 / #102Change Waiting queue status for all queues to "break"
*103 / #103Logoff from all waiting queues.
  


1233Voicemail box of user
 
 


*8Pick up first ringing
*8[extension number]Directed pickup of [Extension]
*8[group number]Group pickup
*96 / #96Voicemail box of user
  


*[xx]Toggle Code: To activate/deactivate the dial plan with number xx
  


1233 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]
*96 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]
#96 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]

Auto provisioning

The Gigaset N510, N720 and Maxwell 10, Maxwell 3 and Maxwell basic are released behind the XRC Services platform including auto provisioning.

Go to Devices and click +Add and choose Gigaset pro:

Select the desired certified Gigaset pro product:

Enable auto-provisioning by clicking on No switch to change to Yes:

Enter the device MAC address and ID:

To finalize, click on next at the top.

When all steps are taken, like adding users and so on, the device will now automatically be added to the Gigaset pro redirect server.
Connect or restart the device and the device will auto-provisioned. 

Documentation and information:

Find here the support site

 

 

...