Versions Compared

Old Version 8

changes.mady.by.user Marchant Matthew

Saved on

compared with

New Version 9

changes.mady.by.user Marchant Matthew

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

VoIP Unlimited

Section
Column
width50%
Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes1
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous Call

No2

A-number forwarding-

1 - Call forwarding through system only, redirects via 302 are not supported by VoIP Unlimited

2 - Anonymous call is not supported, but alternatively precede the number dialled with 141 and VoIP unlimited will withhold for you.

 

Column
width30%

Image Modified

Background Color
blue
blue

Table of Contents

 

 

Background Color
colorgrey

 

Gigaset Hybird settings.

When configuring a SIP trunk into the Hybird you must complete the following settings:

  1. Assistants/PBX/Trunks

Background Color
colorgrey

 

Assistants/PBX/Trunks

1 - Create a New trunk

2 - Connection Type = SIP Provider (DDI)

 

3 -  Sip Provider Settings

Name = Info only

Authentication ID = SIP-ID given to you from VoIP Unlimited

Password = Password given to you from VoIP Unlimited

Registrar = sip.voip-unlimited.net

 

 

 

4 - Trunk Numbers

Insert the range - the last x digits.

For example if your rage is 555500 to 555599,

Extensions = 10 to 20

Make the base number as 5555

555510 to 555520 will route direct to extensions, all other numbers would need to be added to P-P DDI Exception (see below)

 

5 - Class of Service - Select a COS

 

Advanced Settings

6 - Registrar Port

7 - Transport Prpotocol

8 - STUN server

If required : stun.voip-unlimited.net

Port = 10000

9 - P-P DDI Exceptions

Add the any DDI's not going to extensions with the same number.

Just the last digits from the range, in the example above any DDI  00 to 99.