Versions Compared

Old Version 1

changes.mady.by.user Bakker, Bas

Saved on

compared with

New Version Current

changes.mady.by.user Bakker, Bas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

X2Com

Section
Column
width50%

Valid for T440/T640 Firmware version 1.1.3 or below

Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallYes
A-number forwardingYes

 

 

Column
width20%

 

 

 

Column
width30%

Image Modified

Table of Contents

 

 

Info
titleImportant

BCom X2Com uses multiple servers behind the domain name sip.bcomx2c.nl (redundancy and load balancing), because of the possibility that a call can come in from another IP address than the registration IP, the call is declined if the other IP addresses are unknown to the PBX. To solve this you have to create dummy SIP-gateways.

...

Gigaset T640/T440 settings.

Gateway group

...

:

In the Gigaset PBX go to "Administration" -> "Routes" -> "Gateway groups" - Enter the desired name and click on "Create new group":

Image Added 

SIP Gateway

...

:

 

In the Gigaset PBX go to "Administration" -> "Routes" -> "SIP Gateways" - At "Gateway" enter the desired name and click on "Create new gateway":

...

Fill out the provider details:

 

Image Removed

Image Removed

Image Removed

Image Added

Info
titleImportant

With the "Dial command" in above screenshot there is a need to dial an extra 0 for an outside line
If it is not wanted to select an outgoing line with an extra 0 the "Dial command" is as following: PJSIP/{prefix}{number}@[gateway}

Image Added 

Dummy SIP Gateways:

 Image Added

Image Removed

Underneath screenshots of 1 the dummy accountaccounts....

Image Removed

Image Removed

...

Image Added

Image Added