Page History

Example of Sipgate basic gateway settings 1/2.

Example of Sipgate basic gateway settings 2/2.

Dial command

The dial command is the command which is used in the asterisk software. The term {number:1}  means, that at the dialled number (e.g. 008987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !

Group

Select here the previously created gateway group.

Update remote party ID (CLIP)

This setting is just optional, as the provider replaces outgoing CLIP which is not valid with the default number of the SIP account.

For sending another CLIP, use the CLIP-No-Screening feature in the Sipgate basic web-portal.

Advanced Parameter

You have to enter the complete term 'fromdomain=sipgate.de' and also 'fromuser=123456789' in the value-field and press the plus-sign.

Underneath you will see then a preview of the entry in the sip.conf file.

Image Modified

Example of Sipgate basic Outbound routes.

Rule

Enter here a name for the according rule.

Date / Weekdays / Time

With these settings you can configure a time-controlled routing.

Pattern

In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group Sipgate basic.