Versions Compared

Old Version 1

changes.mady.by.user Moser Jan

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Column
width70%

Release Notes

Release Date:

Sept 2016Oct 2016

Version:

2.2.0.129

Improvements

 

 Android

Android 5.1.1 (Lollipop)  

  • Bluetooth headset support
  • Improved headset architecture
  • Video performance improvements

Bugfixes

  • Mode of the WEB-UI switch in the Android settings can't be changed via WEB-UI

  • Call is initiated automatically after around 5sec when handset is pickup from the cradle and number is typed

  • Bad sound quality in 3rd party audio apps

  • Outgoing call started in handsfree when corded/DECT HS is laying off-hook

  • Not possible to answer call with DECT HS
  • Audio route changing during busy tone
  • Shrill noise observed on Maxwell 10 device

  • Audio is not routed to EHS headset when switching between Corded handset and EHS headset

  • No Audio when Dect Headset and USB headset is connected
  • Maxwell's sip account deregistering after receiving multiple incoming calls
  • Error code instead of a busy tone
  • Dialing with * is not possible
  • System updates shows wrong information
  • no access with google chrome to any URL
  • Phone is not sending any DNS queries to DNS server if IPv6 is used
  • No speech path during call when HDMI is connected
  • DECT continually starts dialing when laying on cradle
  • Automatic & Manual firmware upgrade happening simultaneously
  • Info widget not displaing call diverts
  • Directory Application Crash when sorting done without any contact
  • Widget for "Programmable Keys" causes laggy behaviour and freezes of "Overview"
  • Call automatically terminated after call waiting ended
  • Maxwell not sending user agent after call crash 
  • No speechpath during attended transfer
  • Calls accepted with DECT headset are moved to corded HS

  • DECT Headset not De registering sometimes

  • Robot voice during conference

  • Maxwell Unauthenticated Admin Password Reset

  • Error code instead of a busy tone

  • Audio path is changing to hands free speakting if called party is busy and the audio device headset or handset was used

  • Wrong message in programmable key widget

  • Call termination

Known Issues

Firmware update

Online

In the webinterface of the Maxwell 10 go to: 
Image Removed

Settings - System - Firmware update

Data server URL = 

http://profile.gigaset.net/device/temp/Maxwell/80_1_1.2.20.1_maxwell_10-user_firmware_enc.zip

Click on Update firmware and the latest Firmware that is online will be downloaded.

Manual

First download the Firmware on your PC and unpack
  • Many other improvements

Information

Due to technical design, wireless LAN and Bluetooth Audio should not be used simultaneously

Column
width30%

Image Added

 

Align
alignright
Software versions
Android5.1.1
DVF991903.641a
Build number80_1_2.2.129

Image Removed

 

80_1_1.2.20.1
Section

Firmware update

 

Info
titleImportant

Due to the fact, that Android-5.1 requires a lot of more memory than older Android versions we recommend to insert an external SD-card, or plug in an USB-stick with minimum 2GB free memory space, at least during the upgrade phase!

We strongly advise to do a factory reset after the upgrade to Lollipop, to be sure that all new Lollipop features and settings are correct. A stable SIP device is required in a business customer environment. Via save - restore the configuration or provisioning, the SIP accounts settings can easily be restored. For Android settings / Apps, see the Android Backup and Restore procedure.

 

There are 3 options to upgrade.

Option 1: Two step Method using an SD-card or USB-memory-stick.

 

  1. Plug in an SD-card or USB-stick with at least 2GB free memory (or enter an external SD card). Then start the Maxwell-10 WEB-UI and follow exactly the following 3 steps:
  2. In the web-interface go to: System - Firmware Update page and check if the Data server field is (default) profile.gigaset.net/device
    Image Added
  3. Press "Save"
  4. Press "Update firmware"

 The update will be done in 2 steps.

  1. Upgrade to new Jelly Bean software with USB drivers upgrade to support the USB memory extension.
  2. Upgrade to Lollipop.

Option 2: One step method using external SD-card.

 

  1. Enter an external SD-card (or plug in an USB-stick).
  2. Download the software via the "Download" button on this page.
  3. Unpack the zip file. You will get a .txt file with the Open Source License text and an encrypted zip file which is your firmware image.
  4. In the
webinterface of the Maxwell 10
  1. web-interface go to:
Image RemovedSettings -
  1.  System - Firmware
update

Click on "Choose File" and select the Firmware file.

Click on "Load" to start the upgrade.

  1. Update page and select the above extracted zip file.
    Image Added
  2. Start the upgrade.

Option 3: One step method without external SD-card.

 

  1. Do a factory reset of the Maxwell 10 to free all memory for firmware update.
  2. Download the software via the "Download" button on this page.
  3. Unpack the zip file. You will get a .txt file with the Open Source License text and an encrypted zip file which is your firmware image.
  4. In the web-interface go to: System - Firmware Update page and select the above extracted zip file.
    Image Added
  5. Start the upgrade.

 

 

 

Column
width30%
Align
aligncenter
Software versions
DVF991903.64A16
Build number