Versions Compared

Old Version 128

changes.mady.by.user Kopowski Thomas

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Image Added




1Value: allowed12Value: allowed2999911SecuritySRTPSecurityAcceptNonSRTPCalls2Parameter name0-3SIP.Account.0-3.Provider0-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-320-30-30-3.AutoNegOfDTMFTransmission10-30-321Value: allowed50Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - PersonalXSIPersonalDirectoryEnabledWeb-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Value: allowed159Account.1222Web-interface: Settings - Telephony - Call DivertCallDivert.0-3.All.ActiveCallDivert.VoiceMailValue: allowed049Value: allowed4Value: allowedValue:min1000Parameter nameDirectoryNameEnablePrivateDirectoryEnableWhiteDirectoryWhiteDirectoryNameEnableYellowDirectoryNumberFilterbpProviderNameValue: allowedValue: allowedValue:minHeaderOptionalValue: allowed6035Value: allowedScreenSaverTimeoutDirectory2.disable.enableMessagesActionURL.disable2318 Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right SoftkeyValue: allowed34 34 3Value:max maxwell X.

PhoneUI.Keys.FunctionKeys.X.DisplayName

Maxwell 3 7

PhoneUI.Keys.FunctionKeys.X.Connection

Maxwell 3 0 7

PhoneUI.Keys.FunctionKeys.X.PhoneNumber

Maxwell 3CallPickupCodeURLCallDivertTypeEnableCodeDisableCodeDTMFCode0-9,*,#ActionColorValue: allowedValue: allowedValue:max1864001Value: allowedNTPServiceEnabledAutomatedDaylightSavingEnabledValue: allowedValue: allowed1111 Do not show Function key icons Show Function key icons (Default) 111111
Web-interface: Settings - Network - IP
IP
NET.General.DeviceNameInNetworka-z, A-Z, 0-9, -
Address Assignment
NET.LAN.IP.DHCP.Enabled0

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address
NET.IP.IPv4.SubnetMask
NET.IP.IPv4.StandardGateway
NET.IP.IPv4.PreferredDNSServer
NET.IP.IPv4.AlternateDNSServerParameter nameValue:minValue:max
Web-interface: Settings - Network - LAN
HTTP Proxy
NET.HTTP.ProxyServer.Active0

0 = Enable proxy server No (Default)

1 = Enable proxy server Yes

NET.HTTP.ProxyServer.Address
NET.HTTP.ProxyServer.Port0 655350 (Default) - 65535
VLAN
NET.VLAN.Tagging0

0 (Default) = off
1 = LAN
2 = LAN + PC 

NET.VLAN.LAN.Identifier
NET.VLAN.LAN.Priority0 - 7
NET.VLAN.PC.Identifier
NET.VLAN.PC.Priority0 7- 7
Quality of Service (QoS)
NET.QoS.RTP.DSCP0 - 64: 46 (Default)
NET.QoS.SIP.DSCP0 - 64: 34 (Default)
Link Layer Discovery Protocol (LLDP)
NET.LLDP.Active0 = Disabled
1 = Enabled (Default)
NET.LLDP.PacketInterval1 - 3600: 60 (Default)Parameter nameValue:minValue:max
Web-interface: Settings - Telephony - VoIP
SIP
SIP.TransportProtocol1

1 = UDP (Default)

2 = TCP

SIP.Port1 - 65535
SIP.Timers.T10 - 9999
SIP.Timers.Session90 - 9999
SIP.Timers.FailedRegistration0 - 9999
SIP.Timers.Subscription0 - 9999
SIP.Timers.FailedSubscription00 = Disabled
300 = Default 
SIP.PRACK0 = Disable
1 = Enabled
SIP.DisplayDiversionInfo.enable00 = Do not show the Diversion Info
1 (Default) = Show the Diversion Info
RTP
SIP.RTP.Port1 - 65535: 5004 (Default)
SIP.RTP.UseRandomPorts00 = Do not use random RTP ports
1 = Use random port from range <RTP.Port> - <RTP.Port+50> for RTP stream
SIP.RTP.UseSymmetricPorts0 = Disable
1 = Enabled
SIP.RTP.UseRTCP0 = Disable
1 = Enabled
SIP.RTP.UseRTCPXR

0 = Disable
1 = Enabled

SIP.RTP.RTCPXRServer.01AddressRTCP XR server address
SIP.RTP.RTCPXRServer.PortRTCP XR server port
Security
SIP.Security.SRTP0 = Disable
1 = Enabled
SIP.Security.AcceptNonSRTPCalls0 = Disable
1 = Enabled
SIP.Security.UseSIPSSIP.Security.UseSIPS0

0 => TLS is disabled

1 => TLS is enabled, SIP scheme enabled

2 => TLS is enabled, SIPS scheme enabled

Value:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Connections
SIP.DefaultAccount03 0 - 3 (4-5 Maxwell 4)
SIP.Accounts.Failover

0

1

0 = Do not use failover (default)
1 = Use failover

IP Connection

SIP.Account.

x.AccountName

Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5


SIP.Account.x.Active

0 = Inactive
1 = Active

SIP.Account.x.Provider
Personal Provider Data
SIP.Account.x.AuthName
SIP.Account.x.AuthPassword
SIP.Account.x.DisplayName
SIP.Account.x.Username
General Data of your Service Provider
SIP.Account.x.Domain
SIP.Account.x.ProxyServer.Address
SIP.Account.x.ProxyServer.Port1 - 65535
SIP.Account.x.RegistrationServer.Address
SIP.Account.x.RegistrationServer.Port1 - 65535
SIP.Account.x.RegistrationServer.RefreshTimer0 - 99999999
Redundancy
SIP.Account.x.DNSQuery

0

1

0 = A

1 = A + SRV 

Failover Server
SIP.Account.x.FailoverServer.Enabled0 = Disabled
1 = Enabled
SIP.Account.x.FailoverServer.Address
SIP.Account.x.FailoverServer.Port
Network Data of your Service Provider
SIP.Account.x.STUN.Enabled0 = Disabled
1 = Enabled
SIP.Account.x.STUN.Address
SIP.Account.x.STUN.Port1 65535- 65535
SIP.Account.x.STUN.ManualNATIP address
SIP.Account.x.STUN.RefreshTimer0 - 9999
SIP.Account.x.STUN.NATRefreshTimer0 - 9999
SIP.Account.x.ICE0 = Disabled
1 = Enabled
SIP.Account.x.OutboundProxy.Mode0

0 = Always
1 = Auto
2 = Never 

SIP.Account.x.OutboundProxy.Address
SIP.Account.x.OutboundProxy.Port1 - 65535

SIP.Account.

x.DTMFTransmission

0

Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5

0 = Audio
1 = RFC 4733
2 = Audio + RFC 4733
3 = SIP info
4 = RFC 4733 + SIP info
5 = Audio + RFC 4733 + SIP info 

IP.Account.x.AutoNegOfDTMFTransmission
Maxwell B/2/3: x = 0 - 3


0

Maxwell 4: x = 0 - 5

0 = Automatic DTMF transmission disabled
1 = Automatic DTMF transmission enabled

SIP.Account.x.AllowRouteHeaders

0

1

0 = Switch off
1 = Switch on 

Display of Caller Information
SIP.Account.x.CLIPSource0

0 = FROM
1 = PPI + FROM
2 = PAI + PPI + FROM

Parameter nameValue:minValue:maxValue: allowed

3 = RPID +FROM

Web-interface: Settings - Telephony - Audio
Audio
SIP.VoiceQuality

0

2

0 = Optimized for high bandwidth
1 = Optimized for low bandwidth
2 = Own codec preference

Tip

You need to use "2" Own codec preference to set available and active codecs.

SIP.ActiveCodecsThe codecs are sperated with a "," Example <param name="SIP.ActiveCodecs" value="8,9,0" />
0 = uLaw
8 = aLaw
9 = g.722
18 = G.729
109 = iLBC
115 = g.726-32 
SIP.RTP.Duration

20

30

20 ms

30 ms

30 

SIP.G729.AnnexBSIP.G729.AnnexB00 = Do not use Annex B (default)
1 = use Annex B 		Parameter nameValue:minValue:max
Web-interface: Settings - Telephony - Phone System
Phone System
Telephony.PhoneSystem.Type0

0 = Standard (Default)
1 = Gigaset T640/T440
3 = Hybird 120 GE
4 = Starface
5 = Broadsoft (V2.11.x needed)
6 = Teles (2.21.x needed)
11 = Vodafone
13 = Vodia
Peoplefone

Web-interface: Settings - Telephony - Phone System - Broadsoft
BLF
Telephony.PhoneSystem.BLFURLBroadsoft BLF URL
Telephony.PhoneSystem.Broadsoft.BLF.AutomaticFKFilling.Enabled10 = Manual Broadsoft BLF creation
1 = Automatic Broadsoft BLF creation
Telephony.PhoneSystem.Broadsoft.BLF.CallPickupCodeBroadsoft Call Pick up Feature code via blinking BLF key
Broadsoft services
Telephony.PhoneSystem.XSI.ServerXSI Server URL
Telephony.PhoneSystem.XSI.SIPAuthentication00 = XSI username and Password
1 = SIP authentication
Telephony.PhoneSystem.XSI.AuthNameXSI Username
Telephony.PhoneSystem.XSI.AuthPasswordXSI Password
Telephony.PhoneSystem.XSI.SearchAnywhereInName.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.Broadsoft.Lookup.Incoming0 = Disabled
1 = Enabled
Telephony.PhoneSystem.Broadsoft.Lookup.Outgoing0 = Disabled
1 = Enabled
Personal
Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.PersonalDirectory.NameNameName of the personal Directory
Group
Telephony.PhoneSystem.XSI.GroupDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupDirectory.NameName of the Group Directory
Group Common
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupCommonDirectory.NameName of the Group Common Directory
Enterprise
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseDirectory.NameName of the Enterprise Directory
Enterprise Common
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.NameName of the Enterprise Common Directory
Call log
Telephony.PhoneSystem.XSI.CallLogType00 = Basic Call log
1 = Enhanced Call log
Automatic Call Distribution (ACD)
Telephony.PhoneSystem.Broadsoft.ACD.Enabled0

0 = ACD Disabled
1 = ACD Enabled

Telephony.PhoneSystem.Broadsoft.ACD.Status0 10 = Agent un-available after login
1= Agent available after login		Parameter nameValue:minValue:max
Flexible Seating
Telephony.PhoneSystem.Broadsoft.FlexibleSeating.Enabled0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Call Settings
Call Transfer
Telephony.CallTransfer.AutoDetermineAddress

Enabled

Disabled

Telephony.CallTransfer.SemiAttendedTransferType0

0 = Early attended 

1 = Semi-attended

Telephony.CallTransfer.HoldOnTransfer.Attended

Enabled
Disabled

Telephony.CallTransfer.HoldOnTransfer.Unattended

Enabled
Disabled

Telephony.CallTransfer.DeriveTargetAddresssipurl, sipcontact
Access Code
Telephony.AccessCode.CodeAccess code 
Telephony.AccessCode.EnabledNot used
Telephony.AccessCode.For0

0 = Outgoing calls list (Default)Never
1 = Incoming calls listFor directories
2 = LDAPFor call lists
3 = Local directoryFor directories and Call lists
4 = Public net directory
5 = Dial editorAlways

Telephony.AccessCode.InternalNumberLength0Set the length for internal numbers 0 - 9
Area Codes
Telephony.AreaCodes.CountryOther,ALB,ARG,AUS,AUT,BHR,BLR,BEL,BOL,BIH,BRA,BGR,CAN,CHL,
CHN,COL,CRI,HRV,CYP,CZE,DNK,ECU,EGY,EST,FIN,FRA,DEU,GRC,HKG,
HUN,ISL,IND,IDN,IRN,IRL,ISR,ITA,JPN,JOR,KWT,LVA,LBN,LIE,LTU,LUX,
MKD,MYS,MEX,MNE,MAR,NAM,NLD,NZL,NOR,PAK,PSE,PAN,PRY,PER,
PHL,POL,PRT,PRI,ROU,RUS,SAU,SRB,SGP,SVK,SVN,ZAF,KOR,ESP,SWE,
CHE,TWN,THA,TUR,ARE,GBR,USA,URY,VEN,VNM
Telephony.AreaCodes.Int.Prefix
Telephony.AreaCodes.Int.Code
Telephony.AreaCodes.Local.Prefix
Telephony.AreaCodes.Local.Code
Tone Selection
Telephony.ToneSchemeINT,AUT,CAN,CZE,DNK,EGY,FIN,FRA,DEU,GRC,NLD,POL,PRT,ROU,
ZAF,RUS,SAU,SVK,ESP,SWE,CHE,ARE,GBR,USA,ITASIP
Telephony.DialTone.Enabled0 = Disabled
1 = Enabled
Call Waiting
SIP.Account.0-3.CallWaiting0 = Disabled
1 = Enabled
SIP.Account.0-3.CallWaitingSignal

Off
SingleBeep
BeepEvery4
BeepEvery10
BeepEvery20

WebUI.CallSettings.CallWaiting.DisableHide Call waiting in Web-UI
Count Calls / Voicemails
SIP.Account.0-3.CountMissedAcceptedCalls0

0 = Missed calls disabled
1 = Missed call enabled (default)

Count Calls / Voicemails
Telephony.Speechpath.CallsViaCallManager0

0 = No
1 = Headset
2 = Handsfree

Telephony.Speechpath.IncCallsWithoutCallManager0

0 = No
1 = Headset
2 = Handsfree

Telephony.Speechpath.OutCallsViaFunctionKey1

1 = Headset
2 = Handsfree

Parameter nameValue:minValue:maxValue: allowed
Call Pickup Group
Telephony.CallPickupGroup.Enabled0 = Disabled
1 = Enabled		0 (Default)
Telephony.CallPickupGroup.Code
Telephony.CallPickupGroup.Ringtone
Telephony.CallPickupGroup.RingingMode0,1,2
Telephony.CallPickupGroup.SubscribedAccount
Web-interface: Settings - Telephony - Call Divert
All Calls
Telephony.CallDivert.0-3.All.Active0 = Disabled
1 = Enabled
Telephony.CallDivert.0-3.All.VoiceMail0 = Disabled
1 = Enabled1 (Default)
Telephony.CallDivert.0-3.All.Target

Phonenumber where all calls are diverted to.

Telephony.CallDivert.0-3.All.VoiceMail should be set to 0 to use this feature.

When Busy
Telephony.CallDivert.0-3.Busy.Active0 = Disabled
1 0 (Default)= Enabled
Telephony.CallDivert.0-3.Busy.VoiceMail0 = Disabled
1 = Enabled		1 (Default)
Telephony.CallDivert.0-3.Busy.Target

Phonenumber where all calls are diverted to when device is busy.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

No Answer
Telephony.CallDivert.0-3.NoAnswer.Active0 = Disabled
1 0 (Default)= Enabled
Telephony.CallDivert.0-3.NoAnswer.Delay5,10,15,20,25,30,45,60,90,120 (Default)
Telephony.CallDivert.0-3.NoAnswer.VoiceMail

0 = Disabled
1

1 (Default)= Enabled

Telephony.CallDivert.0-3.NoAnswer.Target

Phonenumber where all not answered calls are diverted to.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

WebUI.CallDivert.DisableHide Call Divert from Web-UI
Parameter nameValue:minValue:max0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Do not Disturb
Do not Disturb
Telephony.DnD.Active0 = Disabled
1 = Enabled
Telephony.DnD.List.Active

0 = Disabled
1 = Enabled
Telephony.DnD.List.0-49.Name
Telephony.DnD.List.0-49.Number
Telephony.DnD.AnonymousCallBlock0 = Disabled
1 		Parameter nameValue:minValue:max= Enabled
Web-interface: Settings - Telephony - Dialing Plans
Dialling Plans
Telephony.DiallingPlans.List.0-19.Number
Telephony.DiallingPlans.List.0-19.UseAreaCode0 = Disabled
1 = Enabled
Telephony.DiallingPlans.List.0-19.Connection0
Telephony.DiallingPlans.List.0-19.Comment
Telephony.DiallingPlans.List.0-19.Active0 = Disabled
1 = Enabled
Call Barring
Telephony.CallBarring.List.0-19.Number
Telephony.CallBarring.List.0-19.Comment
Telephony.CallBarring.List.0-19.Blocked0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Phone Lock
See: FAQ Maxwell - Locking/unlocking the keypad / Emergency numbersParameter nameValue:minValue:max
Web-interface: Settings - Telephony - Voicemail
Voicemail
SIP.Account.0-3.VoiceMail.Active0 = Disabled
1 = Enabled
SIP.Account.0-3.VoiceMail.MailboxParameter nameValue:maxValue: allowed
Web-interface: Settings - Online Directories - CorporateLDAP
LDAP Directory
NetDir.LDAP.0.DirectoryName
NetDir.LDAP.0.Enable

0 = Disabled
1 = Enabled 

NetDir.LDAP.0.Lookup

0 = Disabled
1 = Enabled 

It works only if the LDAP directory is enabled.

Access to the LDAP Data Server
NetDir.LDAP.0.Server.Address
NetDir.LDAP.0.Server.Port1 - 65535
NetDir.LDAP.0.BaseDN
NetDir.LDAP.0.Username
NetDir.LDAP.0.Password
NetDir.LDAP.0.ResponseTimeout1 - 10
NetDir.LDAP.0.Security

0 = Off
1 = TLS start
2 = LDAPs

Search in LDAP Data Base
NetDir.LDAP.0.NameFilter
NetDir.LDAP.0.NumberFilter
NetDir.LDAP.0.DisplayFormat
NetDir.LDAP.0.MaxNumberOfSearchResults1
NetDir.LDAP.0.FirstName
NetDir.LDAP.0.Surname
NetDir.LDAP.0.PhoneHome
NetDir.LDAP.0.PhoneOffice
NetDir.LDAP.0.PhoneMobile
NetDir.LDAP.0.Email
NetDir.LDAP.0.Fax
NetDir.LDAP.0.Company
NetDir.LDAP.0.Street
NetDir.LDAP.0.City
NetDir.LDAP.0.ZIP
NetDir.LDAP.0.Country
NetDir.LDAP.0.AdditionalAttribute
NetDir.LDAP.0.AdditionalAttributeDialable

Yes

No

Value:minValue:maxValue: allowed
Web-interface: Settings - Online Directories - XML
Directory via XML protocol
NetDir.Xml.0.ProviderName
NetDir.Xml.0.ServerAddress
NetDir.Xml.0.Username
NetDir.Xml.0.Password
NetDir.Xml.0.NumberFilterbp
NetDir.Xml.0.LookupIncomming0 = Disabled
1 = Enabled PrivateDirectoryName
NetDir.Xml.0.LookupOutgoing0 = Disabled
1 = Enabled 
Private Online Directory
NetDir.Xml.0.EnablePrivateDirectory0 = Disabled
1 = Enabled 
NetDir.Xml.0.PrivateDirectoryName
White Pages
NetDir.Xml.0.EnableWhiteDirectory0 = Disabled
1 = Enabled YellowDirectoryName
NetDir.Xml.0.WhiteDirectoryName
Yellow Pages
NetDir.Xml.0.Parameter nameValue:minValue:maxEnableYellowDirectory0 = Disabled
1 = Enabled 
NetDir.Xml.0.YellowDirectoryName
Web-interface: Settings - Online Services - Doorstation
Door Station
NetSrv.DoorStations.0-19.Name
NetSrv.DoorStations.0-19.SIPID
NetSrv.DoorStations.0-19.DTMFCode
NetSrv.DoorStations.0-19.Username
NetSrv.DoorStations.0-19.Password
NetSrv.DoorStations.0-19.CameraURLThis parameter is ignored by Maxwell 2
NetSrv.DoorStations.0-19.PictureRefreshTime

Time in msec, see below for the allowed values.

500 = 2 fps
200 = 5 fps
100 = 10 fps
67 = 15 fps

This parameter is ignored by Maxwell 2

Parameter nameValue:minValue:max

Web-interface: Settings - Desk Phone - Main Menu
Main Menu
System.MainMenu.Content

Standard (Default)
User defined

Parameter name

Value:maxValue: allowed
Web-interface: Settings - Desk Phone - Ringtones
Ringtones
SIP.DefaultRingtoneFor values, see list below.
SIP.Account.0-3.Ringtone.External

06_Gigaset.wavmp3 (or .wav)

Attention: Full-path will be optional from version 2.19.x. Then the filename will be sufficient to set the ringtone. Until version 2.18.4 the full path is still necessary.

Expand
titleList with Ringtones
Name in UI/Web-UI
Filename
From software 2.24.12
0101.wav01.mp3 (or .wav)
02_Memo02_Memo.wav02_Memo.mp3 (or .wav)
03_Vibe03_Vibe.wav03_Vibe.mp3 (or .wav)
04_Listen04_Listen.wav04_Listen.mp3 (or .wav)
05_Down05_Down.wav05_Down.mp3 (or .wav)
06_Gigaset06_Gigaset.wav06_Gigaset.mp3 (or .wav)
07_Egg07_Egg.wav07_Egg.mp3 (or .wav)
08_Peak08_Peak.wav08_Peak.mp3 (or .wav)
09_Step09_Step 3.wav0909_Step09_Step 3.mp3 (or .wav)
10_P Cut10_P Cut.wav10_P Cut.mp3 (or .wav)
11_Set11_Set.wav11_Set.mp3 (or .wav)
12_Sim12_Sim.wav12_Sim.mp3 (or .wav)
13_Tone one13_Tone one.wav13_Tone one.mp3 (or .wav)
14_Dunken14_Dunken.wav14_Dunken.mp3 (or .wav)
15_Piano15_Piano.wav15_Piano.mp3 (or .wav)
16_Officebuffer16_Officebuffer.wav16_Officebuffer.mp3 (or .wav)
17_Twelve17_Twelve.wav17_Twelve17_Twelve.mp3 (or .wav)
18_Flightzone18_Flightzone.wav18_Flightzone.mp3 (or .wav)
19_Waste19_Waste.wav19_Waste.mp3 (or .wav)
20_Smototh G20_Smooth_G.wav20_Smooth_G.mp3 (or .wav)
21_Green Tea21_Green Tea.wav21_Green Tea.mp3 (or .wav)
22_Evolve 122_Evolve 1.oggEvolve 1.ogg
23_Evolve 223_Evolve 2.oggEvolve 2.ogg
Bellcore 1bellcore_dr1.oggbellcore_dr1.ogg
Bellcore 2bellcore_dr2.oggBellcore 3bellcore_dr3dr2.ogg
Bellcore 43bellcore_dr4dr3.oggbellcore_dr3.ogg
Bellcore 4bellcore_dr4.oggbellcore_dr4.ogg
Bellcore 5bellcore_dr5.oggBellcore 5bellcore_dr5.ogg
SIP.Account.0-3.Ringtone.HeaderExternal<http://www.notused.com>;info=alert-external
SIP.Account.0-3.Ringtone.Internal06_Gigaset.wavSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderInternal<http://www.notused.com>;info=alert-internal
SIP.Account.0-3.Ringtone.Group06_Gigaset.wavSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderGroup<http://www.notused.com>;info=alert-group
SIP.Account.0-3.Ringtone.Doorstation06_Gigaset.wavSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderDoorstation <http://www.notused.com>;info=alert-door
SIP.Account.0-3.Ringtone.Parameter nameValue:minValue:maxOptionalSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderOptional
Web-interface: Settings - Desk Phone - Display (Depends on phone type if supported)
Display
PhoneUI.Settings.Language

en-us (Default)

Expand
titleComplete list

de-de

fr-fr

es-es

it-it

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

no-no

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

PhoneUI.Settings.ScreenSaverTimeout00,10,20 (Default),30,40,50,60
PhoneUI.Settings.ColorScheme.Tree0

(Maxwell 3):
0 - White on Black (see main screen then)
1 - White on Blue (see main screen then)
2 - White on Red (see main screen then)
3 - White on Green (see main screen then)

This parameter is ignored by Maxwell 2

PhoneUI.Settings.ColorScheme.Basic4

(Maxwell Basic):
4 - White on Black (see main screen then)
5 - Black on White (see main screen then)

PhoneUI.Settings.Backlight1 - 9: 7 (Default)
PhoneUI.Settings.Contrast1 - 9: 5 (Default)
PhoneUI.Settings.BacklightTimeout1 - 120: 5 (Default): Value is in minutesParameter nameValue:minValue:max
Web-interface: Settings - Desk Phone - Pictures (Only Maxwell 3)
PhoneUI.Settings.ScreenSaverSelection

0

600,10,20 (Default),30,40,50,60PhoneUI.Settings.ScreenSaverSelection03

0 = Analog clock

1 = Digital clock

2 = Analog clock
1 = Digital clock
2 = Pictures
3 = HTTP source
Maxwell 2 only supports values 0 and 1

PhoneUI.Settings.ScreenSaverHTTPSourceThis parameter is ignored by Maxwell 2
Parameter nameValue:minValue:maxValue: allowed
Web-interface: Settings - Desk Phone - Message Notification
Telephony.VoiceMail.VoicemailMessages.Active011 (Default)
PhoneUI.Settings.SelectedWallpapersOnly Maxwell 4: See FAQ Maxwell - Background picture.
Night Mode
IsNightModeEnabled

0 = Disabled

1= Enabled

NightModeStartTimeStart time in format: HH:MM
NightModeEndTimeEnd time in format: HH:MM
IsNightModeSilencingCalls

0 = Disabled

1= Enabled

Web-interface: Settings - Desk Phone - Message Notification
Visual Call Notification (LED)
Telephony.VoiceMail.VoicemailMessages.Active0 = Disabled
1 = Enabled
Calls.Missed.Notification.Active0 = Disabled
1 1 (Default)= Enabled
SIP Notification
PhoneUI.SIP.ShowSIPMessagesOnDisplay0 = Disabled
1 1 (Default)= Enabled
PhoneUI.SIP.ClearSIPMessageWithBackKey0 = Disabled
1 		1 (Default)
Parameter nameValue:minValue:maxValue: allowed
= Enabled

Web-interface:

Web-interface:

Settings - Desk Phone - Keys and LEDs


Programmable Keys
PhoneUI.Keys.ProgrammableKeys.Center.Type

0 = Default
1 = XHTML

PhoneUI.Keys.ProgrammableKeys.CallLog.Type0 = Default
1 = XHTML
PhoneUI.Keys.ProgrammableKeys.Directory.Type

1 = LDAP
3 = XML white pages
4 = Local directory
5 = XML yellow pages
6 = XML Private directory
7 = XSI Personal
8 = XSI Group
9 = XSI Group Common
10 =XSI Enterprise 
11 = XSI Enterprise Common
12 = XHTML

PhoneUI.Keys.ProgrammableKeys.Messages.Type0

0 = Default
1 = FAC
2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Messages.FAC.enable

3 = XHTML

PhoneUI.Keys.ProgrammableKeys.Messages.FAC
PhoneUI.Keys.ProgrammableKeys.Messages.ActionURL
PhoneUI.Keys.ProgrammableKeys.DND.Type

0 = Default

PhoneUI.Keys.ProgrammableKeys.DND.Type02

0 = Default

1 = FAC

2 = Action URL

= XHTML

PhoneUI.Keys.ProgrammableKeys.DND.FAC.enable
PhoneUI.Keys.ProgrammableKeys.DND.FAC.disable
PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.enable
PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.disable
PhoneUI.Keys.ProgrammableKeys.Hold.Type0

0 = Default

1 = DTMF code

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Hold.DTMFCode
PhoneUI.Keys.ProgrammableKeys.Hold.ActionURL
PhoneUI.Keys.ProgrammableKeys.Conference.Type0

0 = Default

1 = DTMF code

2 = Action URL

3= FAC

PhoneUI.Keys.ProgrammableKeys.Conference.DTMFCode
PhoneUI.Keys.ProgrammableKeys.Conference.ActionURL
PhoneUI.Keys.ProgrammableKeys.Conference.FAC
Soft Keys

PhoneUI.Keys.SoftKeys.X.Type

Maxwell B/ 2/ 3 / 4  X=0 Left SoftKey, X=1 Right Softkey

-1

Maxwell 4 X = 2 and X = 3 for the Soft keys in the middle

-1 = No function
3 = Quick Dial
5 = SIP URL
8 = Action URL
9 = SIP INFO
10 = FAC
11 = Call Waiting
12 = Local Directory
13 = Ldap Directory
14 = Xml Public
15 = Xml Yellow
16 = Xml Private
17 = Redial
18 = Select Line
22 = XSI Personal Directory
23 = XSI Group Common Directory
24 = XSI Group Directory
25 = XSI Enterprise Common Directory
26 = XSI Enterprise Directory

PhoneUI.Keys.SoftKeys.X.Action

X = 0 - 3

Left SoftKey, X=1 Right SoftkeyOnly Valid for:

  • SIP INFO

PhoneUI.Keys.SoftKeys.X.Connection

X = 0

- 3

Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.DisableCode

X = 0

- 3

Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.DisableName

X = 0

- 3

Only Valid for:
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.EnableCode

X = 0

- 3

Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.EnableName

X = 0

- 3

Only Valid for:

  • Quick Dial
  • SIP URI
  • Action URL
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.PhoneNumber

X = 0

- 3

Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.URL

X = 0

- 3

Only Valid for:
  • SIP URI
  • Action URL
Parameter nameValue:minValue:max

SoftKeys.X.Active

X = 0 - 3

0 = When SoftKey is FAC then change to disabled
1 = When SoftKey is FAC then change to enabled

It will only change the key status, the device does not send the FAC.

Quick Dial Keys
PhoneUI.Keys.QuickDialKeys.X.Type
x = 1,2,3,4 		0

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.Number
x = 1,2,3,		40 30 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.FAC
x = 1,2,3,4 

0

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL
PhoneUI.Keys.QuickDialKeys.X.ActionURL
x = 1,2,3,		040 - Default
1 - QuickDial
2 - FAC
3 - ActionURL		Parameter nameValue:minValue: allowed
Function keys (Only Maxwell 3)
Function Keys - Configuration
Telephony.ShowKeysDisplayName0 = Disabled
1 = Enabled
PhoneUI.Keys.FunctionKeys.Icons0 = Do not show Function key icons
1 = Show Function key icons (Default) 
PhoneUI.Keys.FunctionKeys.Indicator
0 = Thin
1 = Bold 
Function Keys - Idle Screen

PhoneUI.Keys.FunctionKeys.X.

Type

Maxwell 2 and 3: X = (Function key) 0 - 7

-110

-1 (No Function)

0 (Line)

1 (Shared Line)

2 (Park + Retrieve)

3 (Quick Dial)

4 (BLF)

5 (SIP URI)

6 (Call Divert)

7 (DTMF)

8 (Action URL)

9 (SIP INFO)

10 (FAC)

Expansion module 1 level 1: X = (Function key) 8 - 36
Expansion module 1 level 2: X = (Function key) 37 - 65

Expansion module 2 level 1: X = (Function key) 66 - 94
Expansion module 2 level 2: X = (Function key) 95 - 123

Expansion module 3 level 1: X = (Function key) 124 - 152
Expansion module 3 level 2: X = (Function key) 153 - 181

Maxwell 4

: X = (Function key) 0 -

02560-9, a-z, A-Z, *, @ , etc.

37

Expansion module 1 level 1: X = (Function key) 38 - 66
Expansion module 1 level 2: X = (Function key) 67 - 95

Expansion module 2 level 1

: X = (Function key)

96 -

03

SIP account 0 (1) - 3 (4)

Valid for:

  • Line
  • Shared Line
  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert
  • SIP Info

124
Expansion module 2 level 2: X = (Function key) 125 - 153

Expansion module 3 level 1: X = (Function key) 154 - 182
Expansion module 3 level 2

: X = (Function key) 183 - 211

-1 (No Function)

0 (Line, not for Expansion module)

1 (Shared Line, not for Expansion module)

2 (Park + Retrieve, not for Expansion module)

3 (Quick Dial)

4 (BLF)

5 (SIP URI)

6 (Call Divert, not for Expansion module)

7 (DTMF)

8 (Action URL)

9 (SIP INFO)

10 (FAC)

0 - 7

Valid for:

  • Park and Retrieve
  • Quick Dial
  • BLF
    • Call Divert

    PhoneUI.Keys.FunctionKeys.X.

    DisplayName

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Valid for:

    BLF0-9, a-z, A-Z, *, @ , etc.

    PhoneUI.Keys.FunctionKeys.X.

    Connection

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    SIP account 0 (1) - 3 (4)

    Valid for:

    • SIP URI
    • Action URI
    PhoneUI.Keys.
    • Line
    • Shared Line
    • Park and Retrieve
    • Quick Dial
    • BLF
    • Call Divert
    • SIP Info

    PhoneUI.Keys.FunctionKeys.X.

    PhoneNumber

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7



    Valid for:

    • Park and Retrieve
    • Quick Dial
    • BLF
    • Call Divert

    PhoneUI.Keys.FunctionKeys.X.

    CallPickupCode

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Valid for:

    • DTMF
    • FACBLF

    PhoneUI.Keys.FunctionKeys.X.

    URL

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Valid for:

    • SIP URI
    • FACAction URI

    PhoneUI.Keys.FunctionKeys.X.

    CallDivertType

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Available in Maxwell 3
    Valid for:

    • DTMFCall Divert

    PhoneUI.Keys.FunctionKeys.X.

    EnableCode

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Valid for:

    • DTMF
    • FACSIP INFO

    PhoneUI.Keys.FunctionKeys.X.

    DisableCode

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    		0

    Valid for:

    		2

    "0" -> Red
    "1" -> Green
    "2" -> Yellow
    "3" -> Standard

    This parameter is ignored by Maxwell 2 for the main-device keys.

    Only expansion module keys can be used with multi-color.

    		Function keys for expansion module see here
    Parameter nameValue:minValue:maxValue: allowed
    Web-interface: Settings - Desk Phone - Events
    • FAC

    PhoneUI.Keys.FunctionKeys.X.DTMFCode

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Available in Maxwell 3 and 4
    Valid for:

    • DTMF

    PhoneUI.Keys.FunctionKeys.X.Action

    Maxwell 2, 3 and 4: X = (Function key) 0 - 7

    Valid for:

    • SIP INFO

    PhoneUI.Keys.FunctionKeys.X.Color

    Maxwell 2, 3 and 4: X = (Function key) 0 - 249



    "0" -> Red
    "1" -> Green
    "2" -> Yellow
    "3" -> Standard

    This parameter is ignored by Maxwell 2 for the main-device keys.

    Only expansion module keys can be used with multi-color.

    Function keys for expansion module see here
    Web-interface: Settings - Desk Phone - Events
    URL Links for Events
    System.Events.RegistrationSuccessed
    System.Events.RegistrationFailed
    System.Events.ConnectionEstablished
    System.Events.ConnectionTerminated
    System.Events.OffHook
    System.Events.OnHook
    System.Events.IncomingCall
    System.Events.OutgoingCall
    Web-interface: Settings - Desk Phone - Local Phonebook See wiki article
    Load Phonebook from URL
    System.LocalPhonebook.Url
    System.LocalPhonebook.UpdateTime08:00
    Display
    System.LocalPhonebook.Name
    PhoneUI.Directory.Local.SearchAnywhere0 = No
    1 = Yes
    PhoneUI.Directory.Local.NameFirst0 = Surname, Name
    1 = Name, Surname    		System.Events.RegistrationSuccessedSystem.Events.RegistrationFailedSystem.Events.ConnectionEstablishedSystem.Events.ConnectionTerminatedSystem.Events.OffHookSystem.Events.OnHookSystem.Events.IncomingCallSystem.Events.OutgoingCallParameter nameValue:minValue:max
    Web-interface: Settings - Web Configurator
    WebUI.AdminPassword
    WebUI.UserPassword
    WebUI.ShowPassword
    WebUI.AllowAccessWeb0 10 = = Allow access from a different subnet
    1 = No access from different subnet (Default)    		Parameter nameValue:minValue:max
    Web-interface: Settings - System - Phone Web Server
    HTTP Server

    HTTP.ConnectionType

    HTTP (Default)
    HTTPS
    HTTP_HTTPS

    HTTP.Port1 - 65535: 80 (Default)
    HTTP.SecurePort1 - 65535: 443 (Default)
    WebUI.LogoutTimer1 - 60: 10 (Default)Parameter nameValue:minValue: allowed
    Web-interface: Settings - System - Provisioning and Configuration

    PhoneUI.Provisioning.ShowInProgressOnDisplay

    (Parameter is not in web-interface)

    		0

    0 = Do not show "Provisioning in Progress" on Display.

    1 = Show "Provisioning in Progress" on Display. (Default)

    Auto Provisioning
    System.Provision.ProvisioningServerhttp://profile.gigaset.net/device/%DVID/ (Default)
    Web-interface: Settings - System - Firmware Update
    Firmware Update
    FirmwareManagment.AutomaticCheckForUpdates

    0

    		1

    0 = Automatic check for updates is "No"

    1 = Automatic check for updates is "Yes"

    System.Provision.Period

    (Parameter is not in web-interface)

    		600

    0 (Default) =  Random value between 1:00 and 4:00 am

    Minimum time is 600 seconds.
    If you configure the time <600 and > 0 then it can be that during manual testing provisioning, the
    device will wait until the 600 seconds are passed and with the correct setting this
    will not happen. 

    Parameter nameValue:minValue:maxValue: allowed

    Maximum time is 86400 seconds

    Web-interface: Settings - System Web-interface: Settings - System - Security
    System.Security.AcceptAllCertificates0

    0 = Accept all certificates No (Default)

    1 = Accept all certificates Yes

    System.Security.HTTPAuthUsername
    System.Security.HTTPAuthPasswordParameter nameValue:minValue:max
    Web-interface: Settings - System - Date and Time
    System.DateAndTime.AutoAdjustTime
    (Updated in the 2.22 software or higher)    		NTPServiceDisabled

    NTPServiceDisabled = Setting "Local" in web-interface, time is set manually.
    NTPServiceEnabled = NTP server via provisioning, if not send then use DHCP option 42
    NTPServiceManual = NTP server is entered manually via the web-interface.
    NTPServiceDHCP = Use DHCP option 42, if not send then use NTP server via provisioning.

    System.DateAndTime.TimeServer

    		pool.ntp.org (Default)
    System.DateAndTime.TimeZone

    GMT+1.Europe/Amsterdam


    Expand
    titleComplete list

    GMT-11.Pacific/Midway
    GMT-10.Pacific/Honolulu
    GMT-9.America/Anchorage
    GMT-8.America/Los_Angeles
    GMT-8.America/Tijuana
    GMT-7.America/Phoenix
    GMT-7.America/Chihuahua
    GMT-7.America/Denver
    GMT-6.America/Costa_Rica
    GMT-6.America/Chicago
    GMT-6.America/Mexico_City
    GMT-6.America/Regina
    GMT-5.America/Bogota
    GMT-5.America/New_York
    GMT-4.America/Barbados
    GMT-4.America/Halifax
    GMT-4.America/Manaus
    GMT-3.America/Sao_Paulo
    GMT-3.America/Argentina/Buenos_Aires
    GMT-3.America/Godthab
    GMT-3.America/Montevideo
    GMT-3.America/Santiago
    GMT-2.Atlantic/South_Georgia
    GMT-1.Atlantic/Azores
    GMT-1.Atlantic/Cape_Verde
    GMT.Africa/Casablanca
    GMT.Europe/London
    GMT+1.Europe/Amsterdam
    GMT+1.Europe/Belgrade
    GMT+1.Europe/Brussels
    GMT+1.Europe/Sarajevo
    GMT+1.Africa/Brazzaville
    GMT+1.Africa/Windhoek
    GMT+2.Asia/Amman
    GMT+2.Europe/Athens
    GMT+2.Asia/Beirut
    GMT+2.Africa/Cairo
    GMT+2.Africa/Harare
    GMT+2.Europe/Helsinki
    GMT+2.Asia/Jerusalem
    GMT+3.Asia/Baghdad
    GMT+3.Asia/Kuwait
    GMT+3.Europe/Minsk
    GMT+3.Europe/Moscow
    GMT+3.Africa/Nairobi
    GMT+4.Asia/Baku
    GMT+4.Asia/Dubai
    GMT+4.Asia/Tbilisi
    GMT+4.Asia/Yerevan
    GMT+5.Asia/Karachi
    GMT+5.Asia/Oral
    GMT+5.Asia/Yekaterinburg
    GMT+6.Asia/Almaty
    GMT+7.Asia/Bangkok
    GMT+7.Asia/Krasnoyarsk
    GMT+8.Asia/Shanghai
    GMT+8.Asia/Hong_Kong
    GMT+8.Asia/Irkutsk
    GMT+8.Asia/Kuala_Lumpur
    GMT+8.Australia/Perth
    GMT+8.Asia/Taipei
    GMT+9.Asia/Seoul
    GMT+9.Asia/Tokyo
    GMT+9.Asia/Yakutsk
    GMT+10.Australia/Brisbane
    GMT+10.Pacific/Guam
    GMT+10.Australia/Hobart
    GMT+10.Asia/Magadan
    GMT+10.Australia/Sydney
    GMT+10.Asia/Vladivostok
    GMT+12.Pacific/Auckland
    GMT+12.Pacific/Fiji
    GMT+12.Pacific/Majuro
    GMT+13.Pacific/Tongatapu

    System.DateAndTime.AutoAdjustClockForDSTAutomatedDaylightSavingDisabled

    AutomatedDaylightSavingDisabled

    AutomatedDaylightSavingEnabled

    System.DateAndTime.TimeFormat

    12h

    24h (Default)

    System.DateAndTime.DateOrder

    dd.mm.yyyy (Default)

    mm.dd.yyyy

    System.DateAndTime.NTPDns

    Not in web-interface: Enable/disable PTR queries for NTP

    NTPDnsEnabled

    NTPDnsDisabled

    		Parameter nameValue:minValue:max

    Web-interface
    WebUI.Language

    en-us (Default)

    Expand
    titleComplete list

    de-de

    fr-fr

    es-es

    it-it

    nb-no

    nl-nl

    tr-tr

    pt-pt

    el-gr

    da-dk

    sv-se

    cs-cz

    pl-pl

    sl-sl

    ro-ro

    ru-ru

    hu-hu

    bg-bg

    hr-hr

    sr-rs

    sq-al

    WebUI.ShowPIN

    0

    		1

    0 = Show PIN No

    1 = Show PIN Yes (Default)

    PhoneUI.Security.PIN1234 (Default)Parameter nameValue:minValue:max
    Device settings not available via web-interface
    Phone UI
    PhoneUI.Settings.Volume

    1

    - 10

    : 5 (Default)

    Menu - Settings - Audio - Ringtones -Volume

    PhoneUI.Settings.Confirmations0

    0 (Default)

    Menu - Settings - Audio - Advisory Tones - Confirmations

    PhoneUI.Settings.KeyClick0

    0 (Default)

    Menu - Settings - Audio - Advisory Tones - Key Click

    PhoneUI.Settings.AnonymousCallSilencing0Menu - Settings - Audio - Ringtones - Anonymous Call Silencing
    PhoneUI.Audio.ReceiverVolume1 - 10: 3 (Default)
    PhoneUI.Audio.HeadsetVolume1 - 10: 3 (Default)
    PhoneUI.Audio.HandsfreeVolume1 - 10: 3 (Default)
    PhoneUI.SelectedServices.Disable

    0

    		1

    0 = Show Selected Services menu in PhoneUI (Default)
    1 = Hide Selected Servicesmenu in PhoneUI

    		PhoneUI.Keys.FunctionKeys.Icons
    0Telephony.ShowKeysDisplayName0 = No
    1 =     		Yes
    PhoneUI.ActiveRingbacks.Disable00 = Show Active Ringbacks menu item in PhoneUI (Default)
    1 = Hide Active Ringbacks menu item in PhoneUI
    PhoneUI.Audio.OneMelody.Doorstation
    PhoneUI.Audio.OneMelody.External
    PhoneUI.Audio.OneMelody.Group
    PhoneUI.Audio.OneMelody.Internal
    PhoneUI.Audio.OneMelody.Optional
    PhoneUI.CallDivert.Disable0 10 = Show Call Divert menu item in PhoneUI (Default)
    1 = Hide Call Divert menu in PhoneUI
    PhoneUI.CallWaiting.Disable0 10 = Show Call Waiting menu item in PhoneUI (Default)
    1 = Hide Call Waiting menu in PhoneUI
    PhoneUI.Directory.Local.NameFirst
    PhoneUI.Menu.Contacts.Visible0 10 = Hide Contacts menu in PhoneUI
    1 = Show Contacts menu in PhoneUI (Default)
    PhoneUI.WithholdNumber.Disable0 10 = Show Withhold Number menu item in PhoneUI (Default)
    1 = Hide Withhold Number menu item in PhoneUI
    WEB-UI
    WebUI.CallSettings.CallWaiting.Disable0

    0 = Show Call waiting menu in Web-UI (Default)
    1 = Hide Call waiting in Web-UI

    WebUI.CallDivert.Disable0

    0 = Show Call Divert menu in Web-UI (Default)
    1 = Hide Call Divert menu in Web-UI

    Note: It will also enable/disable the function key Call Divert.

    Others
    PhoneUI.Settings.DistinctiveRinging0

    1 (Default) = Show all ringtones in MMI and web-interface
    0 = Hide the Distinctive ringtones (External, Internal, Group, Doorstation) in MMI and web-interface. Used when provider does not support Distinctive ringtone.

    SIP.Checksync.Simple0

    0 (default) = Device will not reboot automatic after check-sync.
    If reboot=true is send then of course device will reboot
    1 = Device will reboot automatic after check-sync. (same behavior as reboot=true is send)
    If device will receive reboot=false then also reboot will happen.

    Timer 1 only provisioning is done: Device will reboot 5 seconds after downloading provisioning file

    Timer 2 also firmware update is started: Device will reboot 90 seconds after firmware file is downloaded.

    (Device will not allow a reboot during these 90 seconds, it waits until the 90 seconds are passed)

    Calls.Missed.Subscribe.Active0

    0 = inactive - Subscribe for MWI is not send to server, MWI displayed correctly
    1 = active (default) - Subscribe for MWI is send to server, MWI displayed correctly

    SoftKeys.X.Active

    X=0 Left SoftKey, X=1 Right Softkey

    		010 = When SoftKey is FAC then change to disabled
    1 = When SoftKey is FAC then change to enabled
    SIP.Account.(0-3).RegistrationServer.ReregisterAlternative010 (Default) = Disabled, SIP re-REGISTER 50% of the negotiated expire timer.
    1 = Enabled, SIP re-REGISTER 75% of the negotiated expire timer.

     send to server, MWI displayed correctly
    1 = active (default) - Subscribe for MWI is send to server, MWI displayed correctly

    SoftKeys.X.Active

    X=0 Left SoftKey, X=1 Right Softkey

    		0 = When SoftKey is FAC then change to disabled
    1 = When SoftKey is FAC then change to enabled
    SIP.Account.(0-3).RegistrationServer.ReregisterAlternative0 (Default) = Disabled, SIP re-REGISTER 50% of the negotiated expire timer.
    1 = Enabled, SIP re-REGISTER 75% of the negotiated expire timer.
    NetDir.LookupCacheValidationTime

    adjustable lookup cache validation time

    0 = buffer entries
    1 = ask every lookup,
    2 = refresh after 15min,
    3 = refresh after 1h,
    4 = refresh after 6h,
    5 = refresh after 12h,
    6 = refresh after 18h,
    7 = refresh after 1day,
    8 = refresh after 2days,
    9 = refresh after 3days,
    10 = refresh after 5days,
    11 = refresh after 1week

    Web-interface: Expert - Network - Switch Settings
    Switch Settings
    NET.SwitchSettings.EnablePortMirroringEnable port mirroring:
    0 = Disabled
    1 = Enabled
    NETWORK.SwitchSettings.LinkSpeedDuplexLanPort

    Link speed and duplex mode - LAN Port

    Autonegotiation
    10 Mbit Half-Duplex
    10 Mbit Full-Duplex
    100 Mbit Half-Duplex
    100 Mbit Full-Duplex
    1000 Mbit Full-Duplex

    NETWORK.SwitchSettings.LinkSpeedDuplexPcPort

    Link speed and duplex mode - PC Port

    Autonegotiation
    10 Mbit Half-Duplex
    10 Mbit Full-Duplex
    100 Mbit Half-Duplex
    100 Mbit Full-Duplex
    1000 Mbit Full-Duplex
    Disabled

    NET.SwitchSettings.AllowFragmentation

    Allow fragmentation of frames
    0 = Disabled
    1 = Enabled

    Web-interface: Expert - Network - DHCP Settings
    DHCP Settings
    NET.IP.IPv4.DHCP.Options.Disabled43, 66, 114, 120
    Web-interface: Expert - Audio - Adjustment
    Adjustment
    Audio.Adjustment.EnableAec

    Enable AEC handset mode
    Yes = Enabled
    No = Disabled

    MIC Level TX
    Audio.Adjustment.HandsetModeHandset microphone TX level 0 - 10
    Audio.Adjustment.HandsFreeModeHandsfree microphone TX level 0 - 10
    Audio.Adjustment.HeadsetModeHeadset microphone TX level 0 - 10
    Web-interface: Expert - Debugging - System Logging
    Reboot
    System.QA.AutomaticReboot.Enabled

    0 = Disabled

    1 = Enabled

    System.QA.AutomaticReboot.Weekdays

    Monday = 1

    Tuesday = 2

    Wednesday = 4

    Thursday = 8

    Friday = 16

    Saturday = 32

    Sunday = 64

    Example: 

    Monday AND Friday AND Sunday = 1 + 16 + 64 = 81

    System.QA.AutomaticReboot.TimeTime in the following format HH:MM
    example: 15:44
    System Logging
    System.Syslog.RemoteLogging.EnabledActivate Remote Syslog
    0 = Disabled
    1 = Enabled
    System.Syslog.RemoteLogging.ServerSyslog server IP address
    System.Syslog.RemoteLogging.PortSyslog server port (514)
    Web-interface: Expert - Debugging -Advanced Settings
    System.AllowHTTPOutgoing0 = Disabled
    1 = Enabled
    SIP.Notify.AcceptInvalidCSeqAccept Invalid CSeq
    0 = Disabled
    1 = Enabled
    System.Security.RemoteControl.Allow0 = Disabled
    1 = Enabled
    System.Security.RemoteControl.SourceRemote Control Source

    System.Provision.Multicast.Allow

    SIP.Multicast.Active

    		Active SIP Multicast
    System.General.RemoveUASpecialChars

    Remove special characters
    0 = Disabled
    1 = Enabled

    		System.Provision.MaxDownloadSpeedBpsFirmware update download speed limitation (Bytes per second), where 0 (zero) is no limitation.