Versions Compared

Old Version 3

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction



Image Added

Open the web-interface of the Maxwell 3 / Basic and go to: Settings - Network - IP


Image Added


Introduction

Image Removed

fdsgs

 

 
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleSettings
Column
width70%
FeatureValueDescription
Device name in networkMaxwell
 
 IPv6 

Network typeIPv4
 
Select the protocol that is used in your network , IPv4 only
IP address typeStatic
  Dynamic IP address  Subnet mask  Standard gateway  Preferred DNS  Alternate DNS  
Column
width30%
Select Static if your device has a fixed IP address

DynamicSelect Dynamic if your device receives the IP address via a DHCP server
IP address
Enter an IP address for your phone
Subnet mask
The subnet mask specifies how many parts of an IP address the network prefix must comprise
Standard gateway
Enter the IP address for the standard gateway through which the local network is connected to the Internet
Preferred DNS
Enter the IP address for the preferred DNS server
Alternate DNS
Enter the IP address for the alternate DNS server that should be used when the preferred DNS server cannot be reached
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto provisioning
ParameterDescription
NET.General.DeviceNameInNetworka-z, A-Z, 0-9, -
NET.LAN.IP.DHCP.Enabled

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address
NET.IP.IPv4.SubnetMask
NET.IP.IPv4.StandardGateway
NET.IP.IPv4.PreferredDNSServer
NET.IP.IPv4.AlternateDNSServer
toc