Page History

Image Removed

Image Added

Example of Aarenet VoIP trunk gateway settings 1/2.

Example of Aarenet VoIP trunk gateway settings 2/2.

Registrar

Use here the SIP-Server / Registrar (received by Aarenet). In this case an IP-address is used.

.

Proxy

The tests were performed with the the same IP-address as used in the Registrar field, followed by ';lr' , which means "loose-routing".

.

User

Enter here the Username (Benutzername) you have received by Aarenet.

For example

Password

Enter here the Password (Passwort) you have received by Aarenet.

Dial command

The dial command is the command which is used in the asterisk software. The term {number}  means, that the number (e.g. 04455007000) is dialled as entered. If you use a line access code (in most cases '0' is used), you have to add ':1' after "number".

Group

Select here the previously created gateway group.

Update remote party ID or P-Asserted-Identitiy (CLIP)

These settings can be left on the default setting (no - Deactivated)

From Domain

Enter here the Domain/Realm delivered by Aarenet

. You can use the same value as used for the Registrar.

T38 support

In order to have a better fax-support for fax-machines, connected to the FXS ports please deactivate this option.

All tested scenarios were ok with this parameter deactivated.

Underneath the configuration parameter you will see a preview of the complete sip.conf file.