Page History

If in a business environment more DECT coverage is needed

, the best solution is to create an (Mini) multicell solution. A multicell offers more reliability, stability and parallel calls then a repeater solution.

If in some cases, a repeater solution is enough, the N610 supports unencrypted repeaters.An Gigaset repeater can be used with the N610, for now unencrypted is supported

Repeater functionality:

• Up to 6 repeaters in star arrangement
• Connection is unencrypted
• 2 narrowband calls in extended DECT range
• Activation via provisioning

N670 and N870 do not support repeaters, for the N670/N870 (mini) multi-cell is available. 

• even more is not atomic!
• Some settings depend on the other!

So the fully safe procedure to apply this provisioning file is to apply the provisioning twice:

1. It is recommended to save a backup before applying the following provisioning step.
2. Upload this provisioning file via web-ui.
3. "Start auto configuration", should be successful, confirm by OK!
4. Repeat step 3 - "Start auto configuration", should be successful, confirm by OK!
5. Reboot the device. 

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
    <nvm>

		 
        <!-- ATTENTION: DO NOT apply this provisioning xml to N670/N870 system!!! It will break your N670/N870 system-->

<!-- Provisioning is not atomic! ===========================================
 Provisioning is not atomic!
 Wildcard-provisioning even more is not atomic!
 Some settings depend on the other!
 So the fully safe procedure to apply this provisioning file is to apply the provisioning twice:
 1. Upload this provisioning file via web-ui.
 2. "Start auto configuration", should be successful, confirm by OK!
 3. "Start auto configuration", should be successful, confirm by OK!
 4. Reboot the 
		device.
-->
        <param name="dm.local.LocalBaseRpn" value="1"/>
        
    	<!-- Wildcard provisioning is not immediately synchronized to table of ConfirmedBaseStations!!! -->
    	<!-- So please replace wildcard '@' by mac address of your N610, or reboot the base after successful provisioning. -->
    	<param name="ConfirmedBaseStations.@.ucRpnIndex" value="0x1" />
<!-- ======================================================================== -->

<!-- MAC address in lower case, without ':' separator =======================
If you want to prevent wildcard provisioning, 
you need to give the MAC address of the local base,
without ':' separators and in lower case letters:
        <param name="dm.local.LocalBaseRpn" value="1"/>
        <param name="ConfirmedBaseStations.@0x589ec6123456.ucRpnIndex" value="0x1" />
======================================================================== -->
        	
		<param name="DmGlobal.0.DECTCipherDisable" value="1" />
        	<param name="DmGlobal.0.DECTEnhancedEncryption" value="0" />
        	<param name="DmGlobal.0.DECTCfSettings" value="0x00" />
        	<param name="DmGlobal.0.DECTBlindslots" value="0x0aaa" />
        	<param name="DmGlobal.0.WidebandEnabled" value="0" />
        <param name="DmGlobal.0.DECTDSAA2" value="0" />
		
    </nvm>
</provisioning>