Versions Compared

Old Version 4

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright

Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

Here we describe how you can re-register a DECT handset. 


Info
titleRe-register a DECT handset

The DECT handset menu, is adjusted during DECT registration to match the Base station functionality. It can happen when introducing new features and , to make this visible on the DECT handset a new DECT handset registration has to be started to get the new menu's visible on the DECT handset..


DECT handset re-registration can be startedIt can be done:

  • Manually
  • Automatic
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleManual DECT handset re-registration

It is not needed to de-register the handset.

See the example below, the handsets are registered.

Image Modified

In the Nx70 web-interface go to SETTINGS - Mobile devices - Registration Centre and click on Start now.

Image Modified

Open the handset menu: Settings - Registration - Register handset - OK enter the PIN when asked.

Handset is re-registered and has the new/updated handset menu.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAutomatic DECT handset re-registration

Via the following procedure, the system will start the re-registration: (Software 2.29.0 or higher is needed) 

  • After max. 6 hours
  • When handset was out of sync for > 40 seconds
  • Switch handset OFF and On
  • Roaming

This can only be triggered via auto-provisioning:

Create an XML file like the example below.


Info
iconfalse
titleProvisioning example

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">
<nvm>
<!--
Insert correct ipui below to hs.<IPUI>.AccRightsMod

value = "1" will trigger automatic re-registration
without any user interaction when HS starts Location
Registration procedure.

hs.<IPUI>.AccRightsMod is set to "0" by system, when
re-registration is finished.

If you want to start this for all handsets you can use the @  sign.

<param name="hs.@.AccRightsMod" value="1" />

-->
<param name="hs.029e74a599.AccRightsMod" value="1" />

<param name="hs.02ea032c1d.AccRightsMod" value="1" />

</nvm>
</provisioning>


In the web-interface go to: SETTINGS - System - provisioning and configuration - Auto configuration file - Browse, select your file, upload and press Start auto configuration.

Image Modified