Versions Compared

Old Version 10

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 11

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright
Valid for: N670N870
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction
Column
width60%

When connecting Nx70 to a cloud system, provisioning is mostly used to configure the system.

Provisioning can be triggered from the platform via a SIP notify, there must be a working SIP account between the Nx70 and the platform. If there is no working SIP account, the customer firewall/router will block all incoming SIP messages.

For a working SIP account, a DECT handset needs to be registered. During first installation mostly, no handsets are connected.

Therefore we created a SIP account that can be used by auto-provisioning only.

Column
width40%

draw.io Diagram
bordertrue
diagramNameSIP prov account
simpleViewerfalse
width
linksauto
tbstyletop
lboxtrue
diagramWidth682
revision1

Info

Supported from software 2.36 or higher.

All DECT handset SIP accounts are handled by the DECT Manager, the provisioning SIP account is handled by the Integrator.

If you install an Small-Medium system, the SIP accounts will be handled by one device as the Integrator and DECT manager are then running on the same device.

If you install a Large system with separate integrator you will see the provisioning SIP account register from the Integrator and the SIP account registration for the DECT handset from the DECT managers. 

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto-provisioning

The following provisioning parameters are created for this account.

Provisioning parametersDescription

<oper name="set_sip_acc">

<param name="SystemSettings.global.ProviderId" value="0"/>
<param name="SystemSettings.global.AuthName" value=""/>
<param name="SystemSettings.global.AuthPassword" value=""/>
<param name="SystemSettings.global.UserName" value=""/>

</oper>

ProviderId: The Provider or PBX profile that is used by the SIP account. Value 0 - 9

AuthName: The SIP account authentication name

AuthPassword: The SIP account password

UserName: The SIP account username

...