Page History

The Digium TDM410P has the possibility to configure 2 ports as an Analogue Extension, below is described how this is done.

Insert the card in to the Gigaset T300 / T500 PRO.

Hardware installation:

1. Power down the Gigaset T300 / T500 and unplug it from its power source.
2. Attach a static strap to your wrist and open the case.
3. Insert the card into a PCI slot, see picture

Connect Power for FXS Cards

If you have FXS modules on your card, then power must be provided to the Analog 410 Series card by connecting the power cable from the Gigaset T300 / T500 power supply.

Configuration:

To configure the card you need use the web-based management.

Go to Configuration -> Lines -> Add a new Line.

The pull-down menu select Analog Internal

Select the port you would like to use.

Just give it a valid number.

You can add the phone to a user, the analogue ports are displayed as DAHDI/.