Versions Compared

Old Version 115

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Image Added




1Value: allowed12Value: allowed2999911SecuritySRTPSecurityAcceptNonSRTPCalls2Parameter name0-3SIP.Account.0-3.Provider0-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-30-320-30-30-3.AutoNegOfDTMFTransmission10-30-321Value: allowed51Web-interface: Settings - Telephony - XSIPersonalDirectoryEnabledWeb-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - 1Web-interface: Settings - Telephony - Web-interface: Settings - Telephony - Automatic Call 11Value: allowed59222Parameter nameWeb-interface: Settings - Telephony - Call DivertCallDivert.0-Telephony.Value: allowed049Value: allowedServer.AddressNetDir.LDAP1000Parameter nameDirectoryNameEnablePrivateDirectoryEnableWhiteDirectoryEnableYellowDirectoryNumberFilterbpProviderNameValue: allowedValue: allowedHeaderOptional05Value: allowedScreenSaverTimeoutPhoneUI.Settings.Value: allowedCalls.Directory1Messages2ActionURL.enable.disable18 Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey Left SoftKey, X=1 Right Softkey34 334 Value:min maxwell PhoneUI

PhoneUI.Keys.FunctionKeys.X.DisplayName

Maxwell 3 0 7Connection 7Function Value:maxValue: allowedValue:maxValue: allowed10Value: allowedValue:minValue: allowed1Value:max1111PhoneUI.Keys.FunctionKeys.Icons1111110SIPChecksyncSimple0111
Web-interface: Settings - Network - IP
IP
NET.General.DeviceNameInNetworka-z, A-Z, 0-9, -
Address Assignment
NET.LAN.IP.DHCP.Enabled0

0 = IP address type Static

1 = IP address type Dynamic (Default)

NET.IP.IPv4.Address
NET.IP.IPv4.SubnetMask
NET.IP.IPv4.StandardGateway
NET.IP.IPv4.PreferredDNSServer
NET.IP.IPv4.AlternateDNSServerParameter nameValue:minValue:max
Web-interface: Settings - Network - LAN
HTTP Proxy
NET.HTTP.ProxyServer.Active0

0 = Enable proxy server No (Default)

1 = Enable proxy server Yes

NET.HTTP.ProxyServer.Address
NET.HTTP.ProxyServer.Port0 655350 (Default) - 65535
VLAN
NET.VLAN.Tagging0

0 (Default) = off
1 = LAN
2 = LAN + PC 

NET.VLAN.LAN.Identifier
NET.VLAN.LAN.Priority0 - 7
NET.VLAN.PC.Identifier
NET.VLAN.PC.Priority0 7- 7
Quality of Service (QoS)
NET.QoS.RTP.DSCP0 - 64: 46 (Default)
NET.QoS.SIP.DSCP0 - 64: 34 (Default)
Link Layer Discovery Protocol (LLDP)
NET.LLDP.Active0 = Disabled
1 = Enabled (Default)
NET.LLDP.PacketInterval1 - 3600: 60 (Default)Parameter nameValue:minValue:max
Web-interface: Settings - Telephony - VoIP
SIP
SIP.TransportProtocol1

1 = UDP (Default)

2 = TCP

SIP.Port1 - 65535
SIP.Timers.T10 - 9999
SIP.Timers.Session90 - 9999
SIP.Timers.FailedRegistration0 - 9999
SIP.Timers.Subscription0 - 9999
SIP.Timers.FailedSubscription00 = Disabled
300 = Default 
SIP.PRACK0 = Disable
1 = Enabled
SIP.DisplayDiversionInfo.enable00 = Do not show the Diversion Info
1 (Default) = Show the Diversion Info
RTP
SIP.RTP.Port1 - 65535: 5004 (Default)
SIP.RTP.UseRandomPorts00 = Do not use random RTP ports
1 = Use random port from range <RTP.Port> - <RTP.Port+50> for RTP stream
SIP.RTP.UseSymmetricPorts0 = Disable
1 = Enabled
SIP.RTP.UseRTCP0 = Disable
1 = Enabled
SIP.RTP.UseRTCPXR

0 = Disable
1 = Enabled

SIP.RTP.RTCPXRServer.01AddressRTCP XR server address
SIP.RTP.RTCPXRServer.PortRTCP XR server port
Security
SIP.Security.SRTP0 = Disable
1 = Enabled
SIP.Security.AcceptNonSRTPCalls0 = Disable
1 = Enabled
SIP.Security.UseSIPSSIP.Security.UseSIPS0

0 => TLS is disabled

1 => TLS is enabled, SIP scheme enabled

2 => TLS is enabled, SIPS scheme enabled

Value:minValue:maxValue: allowed
Web-interface: Settings - Telephony - Connections
SIP.DefaultAccount03 0 - 3 (4-5 Maxwell 4)
SIP.Accounts.Failover

0

1

0 = Do not use failover (default)
1 = Use failover

IP Connection

SIP.Account.

x.AccountName

Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5


SIP.Account.x.Active

0 = Inactive
1 = Active

SIP.Account.x.Provider
Personal Provider Data
SIP.Account.x.AuthName
SIP.Account.x.AuthPassword
SIP.Account.x.DisplayName
SIP.Account.x.Username
General Data of your Service Provider
SIP.Account.x.Domain
SIP.Account.x.ProxyServer.Address
SIP.Account.x.ProxyServer.Port1 - 65535
SIP.Account.x.RegistrationServer.Address
SIP.Account.x.RegistrationServer.Port1 - 65535
SIP.Account.x.RegistrationServer.RefreshTimer0 - 99999999
Redundancy
SIP.Account.x.DNSQuery

0

1

0 = A

1 = A + SRV 

Failover Server
SIP.Account.x.FailoverServer.Enabled0 = Disabled
1 = Enabled
SIP.Account.x.FailoverServer.Address
SIP.Account.x.FailoverServer.Port
Network Data of your Service Provider
SIP.Account.x.STUN.Enabled0 = Disabled
1 = Enabled
SIP.Account.x.STUN.Address
SIP.Account.x.STUN.Port1 65535- 65535
SIP.Account.x.STUN.ManualNATIP address
SIP.Account.x.STUN.RefreshTimer0 - 9999
SIP.Account.x.STUN.NATRefreshTimer0 - 9999
SIP.Account.x.ICE0 = Disabled
1 = Enabled
SIP.Account.x.OutboundProxy.Mode0

0 = Always
1 = Auto
2 = Never 

SIP.Account.x.OutboundProxy.Address
SIP.Account.x.OutboundProxy.Port1 - 65535

SIP.Account.

x.DTMFTransmission

0

Maxwell B/2/3: x = 0 - 3
Maxwell 4: x = 0 - 5

0 = Audio
1 = RFC 4733
2 = Audio + RFC 4733
3 = SIP info
4 = RFC 4733 + SIP info
5 = Audio + RFC 4733 + SIP info 

IP.Account.x.AutoNegOfDTMFTransmission
Maxwell B/2/3: x = 0 - 3


0

Maxwell 4: x = 0 - 5

0 = Automatic DTMF transmission disabled
1 = Automatic DTMF transmission enabled

SIP.Account.x.AllowRouteHeaders

0

1

0 = Switch off
1 = Switch on 

Display of Caller Information
SIP.Account.x.CLIPSource0

0 = FROM
1 = PPI + FROM
2 = PAI + PPI + FROM

Parameter nameValue:minValue:maxValue: allowed

3 = RPID +FROM

Web-interface: Settings - Telephony - Audio
Audio
SIP.VoiceQuality

0

2

0 = Optimized for high bandwidth
1 = Optimized for low bandwidth
2 = Own codec preference

Tip

You need to use "2" Own codec preference to set available and active codecs.

SIP.ActiveCodecsThe codecs are sperated with a "," Example <param name="SIP.ActiveCodecs" value="8,9,0" />
0 = uLaw
8 = aLaw
9 = g.722
18 = G.729
109 = iLBC
115 = g.726-32 
SIP.RTP.Duration

20

30

20 ms

30 ms

30 

SIP.G729.AnnexBSIP.G729.AnnexB00 = Do not use Annex B (default)
1 = use Annex B 		Parameter nameValue:minValue:max
Web-interface: Settings - Telephony - Phone System
Phone System
Telephony.PhoneSystem.Type0

0 = Standard (Default)
1 = Gigaset T640/T440
3 = Hybird 120 GE
4 = Starface
5 = Broadsoft (V2.11.x needed)
6 = Teles (2.21.x needed)
11 = Vodafone
13 = Vodia
Peoplefone

Web-interface: Settings - Telephony - Phone System - Broadsoft
BLF
Telephony.PhoneSystem.BLFURLBroadsoft BLF URL
Telephony.PhoneSystem.Broadsoft.BLF.AutomaticFKFilling.Enabled00 = Manual Broadsoft BLF creation
1 = Automatic Broadsoft BLF creation
Telephony.PhoneSystem.Broadsoft.BLF.CallPickupCodeBroadsoft Call Pick up Feature code via blinking BLF key
Broadsoft services
Telephony.PhoneSystem.XSI.ServerXSI Server URL
Telephony.PhoneSystem.XSI.SIPAuthentication0 10 = XSI username and Password
1 = SIP authentication
Telephony.PhoneSystem.XSI.AuthNameXSI Username
Telephony.PhoneSystem.XSI.AuthPasswordXSI Password
Telephony.PhoneSystem.XSI.SearchAnywhereInName.Enabled0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Personal
Telephony.PhoneSystem.Broadsoft.Lookup.Incoming0 = Disabled
1 = Enabled
Telephony.PhoneSystem.Broadsoft.Lookup.Outgoing0 = Disabled
1 = Enabled
Personal
Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled0 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.PersonalDirectory.NameName of the personal Directory
Group
Telephony.PhoneSystem.XSI.GroupDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupDirectory.NameName of the Group Directory
Group Common
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.GroupCommonDirectory.NameName of the Group Common Directory
Enterprise
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseDirectory.NameName of the Enterprise Directory
Enterprise Common
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled00 = Disabled
1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.NameName of the Enterprise Common Directory
Call log
Telephony.PhoneSystem.XSI.CallLogType0 10 = Basic Call log
1 = Enhanced Call log
Automatic Call Distribution (ACD)
Telephony.PhoneSystem.Broadsoft.ACD.Enabled0

0 = ACD Disabled
1 = ACD Enabled

Telephony.PhoneSystem.Broadsoft.ACD.Status00 = Agent un-available after login
1= Agent available after login		Parameter nameValue:minValue:max
Flexible Seating
Telephony.PhoneSystem.Broadsoft.FlexibleSeating.Enabled0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Call Settings
Call Transfer
Telephony.CallTransfer.AutoDetermineAddress

Enabled

Disabled

Telephony.CallTransfer.SemiAttendedTransferType

0

1

0 = Early attended 

1 = Semi-attended

Telephony.CallTransfer.HoldOnTransfer.Attended

Enabled
Disabled

Telephony.CallTransfer.HoldOnTransfer.Unattended

Enabled
Disabled

Telephony.CallTransfer.DeriveTargetAddresssipurl, sipcontact
Access Code
Telephony.AccessCode.CodeAccess code 
Telephony.AccessCode.EnabledNot used
Telephony.AccessCode.For0

0 = Outgoing calls list (Default)Never
1 = Incoming calls listFor directories
2 = LDAPFor call lists
3 = Local directoryFor directories and Call lists
4 = Public net directory
5 = Dial editor

Telephony.

Always

Telephony.AccessCode.InternalNumberLength0Set the length for internal numbers 0 - 9
Area Codes
Telephony.AreaCodes.CountryOther,ALB,ARG,AUS,AUT,BHR,BLR,BEL,BOL,BIH,BRA,BGR,CAN,CHL,
CHN,COL,CRI,HRV,CYP,CZE,DNK,ECU,EGY,EST,FIN,FRA,DEU,GRC,HKG,
HUN,ISL,IND,IDN,IRN,IRL,ISR,ITA,JPN,JOR,KWT,LVA,LBN,LIE,LTU,LUX,
MKD,MYS,MEX,MNE,MAR,NAM,NLD,NZL,NOR,PAK,PSE,PAN,PRY,PER,
PHL,POL,PRT,PRI,ROU,RUS,SAU,SRB,SGP,SVK,SVN,ZAF,KOR,ESP,SWE,
CHE,TWN,THA,TUR,ARE,GBR,USA,URY,VEN,VNM
Telephony.AreaCodes.Int.Prefix
Telephony.AreaCodes.Int.Code
Telephony.AreaCodes.Local.Prefix
Telephony.AreaCodes.Local.Code
Tone Selection
Telephony.ToneSchemeINT,AUT,CAN,CZE,DNK,EGY,FIN,FRA,DEU,GRC,NLD,POL,PRT,ROU,
ZAF,RUS,SAU,SVK,ESP,SWE,CHE,ARE,GBR,USA,ITA
Telephony.DialTone.Enabled0 = Disabled
1 = Enabled
Call Waiting
SIP.Account.0-3.CallWaiting0 = Disabled
1 = Enabled
SIP.Account.0-3.CallWaitingSignal

Off
SingleBeep
BeepEvery4
BeepEvery10
BeepEvery20

WebUI.CallSettings.CallWaiting.DisableHide Call waiting in Web-UI
Count Calls / Voicemails
SIP.Account.0-3.CountMissedAcceptedCalls

0

1

0 = Missed calls disabled
1 = Missed call enabled (default)

Count Calls / Voicemails
Telephony.Speechpath.CallsViaCallManager0

0 = No
1 = Headset
2 = Handsfree

Telephony.Speechpath.IncCallsWithoutCallManager0

0 = No
1 = Headset
2 = Handsfree

Telephony.Speechpath.OutCallsViaFunctionKey1

1 = Headset
2 = Handsfree

Value:minValue:maxValue: allowed
Call Pickup Group
Telephony.CallPickupGroup.Enabled0 = Disabled
1 = Enabled
Telephony.CallPickupGroup.Code
Telephony.CallPickupGroup.Ringtone
Telephony.CallPickupGroup.RingingMode0,1,2
Telephony.CallPickupGroup.SubscribedAccount
Web-interface: Settings - Telephony - Call Divert
All Calls
Telephony.CallDivert.0-3.All.Active0 = Disabled
1 0 (Default)= Enabled
Telephony.CallDivert.0-3.All.VoiceMail0 = Disabled
1 = Enabled		1 (Default)
Telephony.CallDivert.0-3.All.Target

Phonenumber where all calls are diverted to.

Telephony.CallDivert.0-3.All.VoiceMail should be set to 0 to use this feature.

When Busy
Telephony.CallDivert.0-3.Busy.Active0 = Disabled
1 = Enabled		0 (Default)
Telephony.CallDivert.0-3.Busy.VoiceMail0 = Disabled
1 		1 (Default)= Enabled
Telephony.CallDivert.0-3.Busy.Target

Phonenumber where all calls are diverted to when device is busy.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

No Answer
Telephony.CallDivert.0-3.NoAnswer.Active0 = Disabled
1 0 (Default)= Enabled
Telephony.CallDivert.0-3.NoAnswer.Delay5,10,15,20,25,30,45,60,90,120 (Default)
Telephony.CallDivert.0-3.NoAnswer.VoiceMail

0 = Disabled
1

1 (Default)= Enabled

Telephony.CallDivert.0-3.NoAnswer.Target

Phonenumber where all not answered calls are diverted to.

Telephony.CallDivert.0-3.Busy.VoiceMail should be set to 0 to use this feature.

WebUI.CallDivert.DisableHide Call Divert from Web-UI
Parameter nameValue:minValue:max0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Do not Disturb
Do not Disturb
Telephony.DnD.Active0 = Disabled
1 = Enabled
Telephony.DnD.List.Active

0 = Disabled
1 = Enabled
Telephony.DnD.List.0-49.Name
Telephony.DnD.List.0-49.Number
Telephony.DnD.AnonymousCallBlock0 = Disabled
1
Parameter nameValue:minValue:maxValue: allowed
= Enabled
Web-interface: Settings - Telephony - Dialing Plans
Dialling Plans
Telephony.DiallingPlans.List.0-19.Number
Telephony.DiallingPlans.List.0-19.UseAreaCode0 = Disabled
1 = Enabled
Telephony.DiallingPlans.List.0-19.Connection04
Telephony.DiallingPlans.List.0-19.Comment
Telephony.DiallingPlans.List.0-19.Active0 = Disabled
1 = Enabled
Call Barring
Telephony.CallBarring.List.0-19.Number
Telephony.CallBarring.List.0-19.Comment
Telephony.CallBarring.List.0-19.Blocked0 = Disabled
1 = Enabled
Web-interface: Settings - Telephony - Phone Lock
See: FAQ Maxwell - Locking/unlocking the keypad / Emergency numbersParameter nameValue:minValue:max
Web-interface: Settings - Telephony - Voicemail
Voicemail
SIP.Account.0-3.VoiceMail.Active0 = Disabled
1 = Enabled
SIP.Account.0-3.VoiceMail.Mailbox
Parameter nameValue:minValue:maxValue: allowed

Web-interface: Settings - Online Directories - CorporateLDAP
LDAP Directory
NetDir.LDAP.0.DirectoryName
NetDir.LDAP.0.Enable

0 = Disabled
1 = Enabled 

NetDir.LDAP.0.NetDir.LDAP.0.Server.PortLookup

0 = Disabled
1 = Enabled 

It works only if the LDAP directory is enabled.

Access to the LDAP Data Server
NetDir.LDAP.0.Server.Address
NetDir.LDAP.0.Server.Port1 - 65535
NetDir.LDAP165535.0.BaseDN
NetDir.LDAP.0.Username
NetDir.LDAP.0.Password
NetDir.LDAP.0.ResponseTimeout1 - 10
NetDir.LDAP.0.Security

0 = Off
1 = TLS start
2 = LDAPs

Search in LDAP Data Base
NetDir.LDAP.0.NameFilter
NetDir.LDAP.0.NumberFilter
NetDir.LDAP.0.DisplayFormat
NetDir.LDAP.0.MaxNumberOfSearchResults1
NetDir.LDAP.0.FirstName
NetDir.LDAP.0.Surname
NetDir.LDAP.0.PhoneHome
NetDir.LDAP.0.PhoneOffice
NetDir.LDAP.0.PhoneMobile
NetDir.LDAP.0.Email
NetDir.LDAP.0.Fax
NetDir.LDAP.0.Company
NetDir.LDAP.0.Street
NetDir.LDAP.0.City
NetDir.LDAP.0.ZIP
NetDir.LDAP.0.Country
NetDir.LDAP.0.AdditionalAttribute
NetDir.LDAP.0.AdditionalAttributeDialable

Yes

No

Value:minValue:maxValue: allowed
Web-interface: Settings - Online Directories - XML
Directory via XML protocol
NetDir.Xml.0.ProviderName
NetDir.Xml.0.ServerAddress
NetDir.Xml.0.Username
NetDir.Xml.0.Password
NetDir.Xml.0.NumberFilterbp
NetDir.Xml.0.LookupIncomming0 = Disabled
1 = Enabled PrivateDirectoryName
NetDir.Xml.0.LookupOutgoing0 = Disabled
1 = Enabled 
Private Online Directory
NetDir.Xml.0.EnablePrivateDirectory0 = Disabled
1 = Enabled WhiteDirectoryName
NetDir.Xml.0.PrivateDirectoryName
White Pages
NetDir.Xml.0.EnableWhiteDirectory0 = Disabled
1 = Enabled YellowDirectoryName
NetDir.Xml.0.WhiteDirectoryName
Yellow Pages
NetDir.Xml.0.
Parameter nameValue:minValue:maxValue: allowed
EnableYellowDirectory0 = Disabled
1 = Enabled 
NetDir.Xml.0.YellowDirectoryName
Web-interface: Settings - Online Services - Doorstation
Door Station
NetSrv.DoorStations.0-19.Name
NetSrv.DoorStations.0-19.SIPID
NetSrv.DoorStations.0-19.DTMFCode
NetSrv.DoorStations.0-19.Username
NetSrv.DoorStations.0-19.Password
NetSrv.DoorStations.0-19.CameraURLThis parameter is ignored by Maxwell 2
NetSrv.DoorStations.0-19.PictureRefreshTime

Time in msec, see below for the allowed values.

500 = 2 fps
200 = 5 fps
100 = 10 fps
67 = 15 fps

Parameter nameValue:minValue:max

This parameter is ignored by Maxwell 2

Web-interface: Settings - Desk Phone - Main Menu
Main Menu
System.MainMenu.Content

Standard (Default)
User defined

Parameter nameValue:minValue:max

Web-interface: Settings - Desk Phone - Ringtones
Ringtones
SIP.DefaultRingtoneFor values, see list below.
SIP.Account.0-3.Ringtone.External

/usr/share/audio/ringtones/06_Gigaset.mp3 (or .wav)

Attention: Full-path will be optional from version 2.19.x. Then the filename will be sufficient to set the ringtone. Until version 2.18.4 the full path is still necessary.

Expand
titleList with Ringtones
/usr/share/audio/ringtones/16_Officebuffer.wav
Name in UI/Web-UI
Filename
From software 2.24.12
01/usr/share/audio/ringtones/01.wav01.mp3 (or .wav)
02_Memo0202_Memo/usr/share/audio/ringtones/.wav02_Memo.mp3 (or .wav)
03_Vibe03_Vibe/usr/share/audio/ringtones/.wav03_Vibe.mp3 (or .wav)
04_Listen/usr/share/audio/ringtones/04_Listen.wav04_Listen.mp3 (or .wav)
05_Down/usr/share/audio/ringtones/05_Down.wav05_Down.mp3 (or .wav)
06_Gigaset/usr/share/audio/ringtones/06_Gigaset.wav06_Gigaset.mp3 (or .wav)
07_Egg07_Egg/usr/share/audio/ringtones/.wav07_Egg.mp3 (or .wav)
08_Peak/usr/share/audio/ringtones/08_Peak.wav08_Peak.mp3 (or .wav)
09_Step/usr/share/audio/ringtones/09_Step 3.wav09_Step 3.mp3 (or .wav)
10_P Cut10_P Cut/usr/share/audio/ringtones/.wav10_P Cut.mp3 (or .wav)
11_Set/usr/share/audio/ringtones/11_Set.wav11_Set.mp3 (or .wav)
12_Sim12_Sim/usr/share/audio/ringtones/.wav12_Sim.mp3 (or .wav)
13_Tone one13_Tone one/usr/share/audio/ringtones/.wav13_Tone one.mp3 (or .wav)
14_Dunken14_Dunken/usr/share/audio/ringtones/.wav14_Dunken.mp3 (or .wav)
15_Piano/usr/share/audio/ringtones/15_Piano.wav16_Officebuffer15_Piano.mp3 (or .wav)
16_Officebuffer16_Officebuffer.wav16_Officebuffer.mp3 (or .wav)
17_Twelve/usr/share/audio/ringtones/17_Twelve.wav17_Twelve.mp3 (or .wav)
18_Flightzone18_Flightzone/usr/share/audio/ringtones/.wav18_Flightzone.mp3 (or .wav)
19_Waste/usr/share/audio/ringtones/19_Waste.wav19_Waste.mp3 (or .wav)
20_Smototh G/usr/share/audio/ringtones/20_Smooth_G.wav20_Smooth_G.mp3 (or .wav)
21_Green Tea21_Green Tea/usr/share/audio/ringtones/.wav21_Green Tea.mp3 (or .wav)
22_Evolve 1/usr/share/audio/ringtones/22_Evolve 1.oggEvolve 1.ogg
23_Evolve 2/usr/share/audio/ringtones/23_Evolve 2.oggEvolve 2.ogg
Bellcore 1bellcore_dr1.ogg/usr/share/audio/ringtones/bellcore_dr1.ogg
Bellcore 2/usr/share/audio/ringtones/bellcore_dr2.oggbellcore_dr2.ogg
Bellcore 3bellcore_dr3.oggBellcore 3/usr/share/audio/ringtones/bellcore_dr3.ogg
Bellcore 4bellcore_dr4.ogg/usr/share/audio/ringtones/bellcore_dr4.ogg
Bellcore 5bellcore_dr5.ogg/usr/share/audio/ringtones/bellcore_dr5.ogg
SIP.Account.0-3.Ringtone.HeaderExternal<http://www.notused.com>;info=alert-external
SIP.Account.0-3.Ringtone.Internal/usr/share/audio/ringtones/06_Gigaset.wavSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderInternal<http://www.notused.com>;info=alert-internal
SIP.Account.0-3.Ringtone.Group/usr/share/audio/ringtones/06_Gigaset.wavSee: SIP.Account.0-3.Ringtone.HeaderGroupExternal
SIP.Account.0-3.Ringtone.HeaderGroup<http://www.notused.com>;info=alert-group
SIP.Account.0-3.Ringtone.Doorstation/usr/share/audio/ringtones/06_Gigaset.wavSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderDoorstation <http://www.notused.com>;info=alert-door
SIP.Account.0-3.Ringtone.
Parameter nameValue:minValue:maxValue: allowed
OptionalSee: SIP.Account.0-3.Ringtone.External
SIP.Account.0-3.Ringtone.HeaderOptional
Web-interface: Settings - Desk Phone - Display (Depends on phone type if supported)
Display
PhoneUI.Settings.Language

en-us (Default)

Expand
titleComplete list

de-de

fr-fr

es-es

it-it

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

no-no

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

PhoneUI.Settings.ScreenSaverTimeout0600,10,20 (Default),30,40,50,60
PhoneUI.Settings.ColorScheme.Tree
3

(Maxwell 3):
0 - White on Black (see main screen then)
1 - White on Blue (see main screen then)
2 - White on Red (see main screen then)
3 - White on Green (see main screen then)

PhoneUI.

This parameter is ignored by Maxwell 2

PhoneUI.Settings.ColorScheme.Basic4

(Maxwell Basic):
4 - White on Black (see main screen then)
5 - Black on White (see main screen then)

PhoneUI.Settings.Backlight1 - 9: 7 (Default)
PhoneUI.Settings.Contrast1 - 9: 5 (Default)
PhoneUI.Settings.BacklightTimeout1 - 120: 5 (Default): Value is in minutesParameter nameValue:minValue:max
Web-interface: Settings - Desk Phone - Pictures (Only Maxwell 3)
PhoneUI.Settings.0600,10,20 (Default),30,40,50,60ScreenSaverSelection

0

3

0 = Analog clock
1 = Digital clock
2 = Pictures
3 = HTTP source

PhoneUI.Settings.ScreenSaverHTTPSource

Maxwell 2 only supports values 0 and 1

PhoneUI.Settings.ScreenSaverHTTPSourceThis parameter is ignored by Maxwell 2
PhoneUI.Settings.SelectedWallpapersOnly Maxwell 4: See FAQ Maxwell - Background picture.
Night Mode
IsNightModeEnabled

0 = Disabled

1= Enabled

NightModeStartTimeStart time in format: HH:MM
NightModeEndTimeEnd time in format: HH:MM
IsNightModeSilencingCalls

0 = Disabled

1= Enabled

Parameter nameValue:minValue:max

Web-interface: Settings - Desk Phone - Message Notification
Visual Call Notification (LED)
Telephony.VoiceMail.VoicemailMessages.Active0 = Disabled
1 		1 (Default)= Enabled
Calls.Missed.Notification.Active0 = Disabled
1 1 (Default)= Enabled
SIP Notification
PhoneUI.SIP.ShowSIPMessagesOnDisplay0 = Disabled
1 1 (Default)= Enabled
PhoneUI.SIP.ClearSIPMessageWithBackKey0 = Disabled
1 		1 (Default)
Parameter nameValue:minValue:maxValue: allowed
= Enabled

Web-interface: Settings - Desk Phone - Keys and LEDs


Programmable Keys
PhoneUI.Keys.ProgrammableKeys.Center.Type0

0 = Local DirectoryDefault
1 = CorporateXHTML

PhoneUI.Keys.ProgrammableKeys.CallLog.Type00 = Default
1 = FACXHTML

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Directory.Type

1 = LDAP
3 = XML white pages
4 = Local directory
5 = XML yellow pages
6 = XML Private directory
7 = XSI Personal
8 = XSI Group
9 = XSI Group Common
10 =XSI Enterprise 
11 = XSI Enterprise Common
12 = XHTML

PhoneUI.Keys.ProgrammableKeys.Messages.Type

0 = Default
1 = FAC
2 = Action URL
3 = XHTML

Messages.FAC.enablePhoneUI.Keys.ProgrammableKeys.Messages.FAC.disable

PhoneUI.Keys.ProgrammableKeys.Messages.FAC
PhoneUI.Keys.ProgrammableKeys.Messages.ActionURL
PhoneUI.Keys.ProgrammableKeys.DND.Type

0

2

0 = Default

1 = FAC

2 = Action URL

= XHTML

PhoneUI.Keys.ProgrammableKeys.DND.FAC.enable
PhoneUI.Keys.ProgrammableKeys.DND.FAC.disable
PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.enable
PhoneUI.Keys.ProgrammableKeys.DND.ActionURL.disable
PhoneUI.Keys.ProgrammableKeys.Hold.Type

0

2

0 = Default

1 = DTMF code

2 = Action URL

PhoneUI.Keys.ProgrammableKeys.Hold.DTMFCode
PhoneUI.Keys.ProgrammableKeys.Hold.ActionURL
PhoneUI.Keys.ProgrammableKeys.Conference.Type

0

2

= Default

1

0 = Default

1 = DTMF code

2 = Action URL

3= FAC

PhoneUI.Keys.ProgrammableKeys.Conference.DTMFCode
PhoneUI.Keys.ProgrammableKeys.Conference.ActionURL
PhoneUI.Keys.ProgrammableKeys.Conference.FAC
Soft Keys

PhoneUI.Keys.SoftKeys.X.Type

Maxwell B/ 2/ 3 / 4  X=0 Left SoftKey, X=1 Right Softkey

-1

Maxwell 4 X = 2 and X = 3 for the Soft keys in the middle

-1 = No function
3 = Quick Dial
5 = SIP URL
8 = Action URL
9 = SIP INFO
10 = FAC
11 = Call Waiting
12 = Local Directory
13 = Ldap Directory
14 = Xml Public
15 = Xml Yellow
16 = Xml Private
17 = Redial
18 = Select Line
22 = XSI Personal Directory
23 = XSI Group Common Directory
24 = XSI Group Directory
25 = XSI Enterprise Common Directory
26 = XSI Enterprise Directory

PhoneUI.Keys.SoftKeys.X.Action

X = 0

- 3

Only Valid for:

  • SIP INFO

PhoneUI.Keys.SoftKeys.X.Connection

X = 0

- 3

Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.DisableCode

X = 0

- 3

Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.DisableName

X = 0

- 3

Only Valid for:
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.EnableCode

X = 0

- 3

Only Valid for:

  • FAC

PhoneUI.Keys.SoftKeys.X.EnableName

X = 0

- 3

Only Valid for:

  • Quick Dial
  • SIP URI
  • Action URL
  • SIP INFO
  • FAC

PhoneUI.Keys.SoftKeys.X.PhoneNumber

X = 0

- 3

Only Valid for:

  • Quick Dial

PhoneUI.Keys.SoftKeys.X.URL

X = 0

- 3

Only Valid for:
  • SIP URI
  • Action URL
Parameter nameValue:minValue:maxValue: allowed

SoftKeys.X.Active

X = 0 - 3

0 = When SoftKey is FAC then change to disabled
1 = When SoftKey is FAC then change to enabled

It will only change the key status, the device does not send the FAC.

Quick Dial Keys
PhoneUI.Keys.QuickDialKeys.X.Type
x = 1,2,3,4 		Quick Dial KeysPhoneUI.Keys.QuickDialKeys.X.Type
x = 1,2,3,4 		0

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.Number
x = 1,2,3,		040 - Default
1 - QuickDial
2 - FAC
3 - ActionURL

PhoneUI.Keys.QuickDialKeys.X.FAC
x = 1,2,3,4 

0

0 - Default
1 - QuickDial
2 - FAC
3 - ActionURL
PhoneUI.Keys.QuickDialKeys.X.ActionURL
x = 1,2,3,		40 30 - Default
1 - QuickDial
2 - FAC
3 - ActionURL		Parameter nameValue:maxValue: allowed
Function keys (Only Maxwell 3)
Function Keys - Configuration
Telephony.ShowKeysDisplayName0 = Disabled
1 = Enabled
PhoneUI.Keys.FunctionKeys.Icons0 = Do not show Function key icons
1 = Show Function key icons (Default) 
PhoneUI.Keys.FunctionKeys.Indicator
0 = Thin
1 = Bold 
Function Keys - Idle Screen

PhoneUI.Keys.FunctionKeys.X.Type

Maxwell 2 and 3: X = (Function key) 0 - 7

-110

-1 (No Function)

0 (Line)

1 (Shared Line)

2 (Park + Retrieve)

3 (Quick Dial)

4 (BLF)

5 (SIP URI)

6 (Call Divert)

7 (DTMF)

8 (Action URL)

9 (SIP INFO)

10 (FAC)

Expansion module 1 level 1: X = (Function key) 8 - 36
Expansion module 1 level 2: X = (Function key) 37 - 65

Expansion module 2 level 1: X = (Function key) 66 - 94
Expansion module 2 level 2: X = (Function key) 95 - 123

Expansion module 3 level 1: X = (Function key) 124 - 152
Expansion module 3 level 2: X = (Function key) 153 - 181

Maxwell 4: X = (Function key) 0 - 37

Expansion module 1 level 1: X = (Function key) 38 - 66
Expansion module 1 level 2: X = (Function key) 67 - 95

Expansion module 2 level 1: X = (Function key) 96 - 124
Expansion module 2 level 2: X = (Function key) 125 - 153

Expansion module 3 level 1: X = (Function key) 154 - 182
Expansion module 3 level 2

: X = (Function key)

183 -

211

-1 (No Function)

0 (Line, not for Expansion module)

1 (Shared Line, not for Expansion module)

2 (Park + Retrieve, not for Expansion module)

3 (Quick Dial)

4 (BLF)

5 (SIP URI)

6 (Call Divert, not for Expansion module)

7 (DTMF)

8 (Action URL)

9 (SIP INFO)

10 (FAC)

02560-9, a-z, A-Z, *, @ , etc.

PhoneUI.Keys.FunctionKeys.X.

DisplayName

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

03-9, a-z, A-Z, *, @ , etc.

PhoneUI.Keys.FunctionKeys.X.Connection

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

SIP account 0 (1) - 3 (4)

Valid for:

  • Line
  • Shared Line
  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert
  • SIP Info

PhoneUI.Keys.FunctionKeys.X.PhoneNumber

Maxwell 2, 3 and 4: X = (Function key) 0 - 7



Valid for:

  • Park and Retrieve
  • Quick Dial
  • BLF
  • Call Divert

PhoneUI.Keys.FunctionKeys.X.CallPickupCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • BLF

PhoneUI.Keys.FunctionKeys.X.URL

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • SIP URI
  • Action URI

PhoneUI.Keys.FunctionKeys.X.CallDivertType

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • Call Divert

PhoneUI.Keys.FunctionKeys.X.EnableCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • DTMF
  • FAC

PhoneUI.Keys.FunctionKeys.X.DisableCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • FAC

PhoneUI.Keys.FunctionKeys.X.DTMFCode

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

0-9,*,#

Available in Maxwell 3 and 4
Valid for:

  • DTMF

PhoneUI.Keys.FunctionKeys.X.Action

Maxwell 2, 3 and 4: X = (Function key) 0 - 7

Valid for:

  • SIP INFO

PhoneUI.Keys.FunctionKeys.X.Color

Maxwell 2, 3 and 4: X = (Function key) 0 -

249

02

"0" -> Red
"1" -> Green
"2" -> Yellow
"3" -> Standard

This parameter is ignored by Maxwell 2 for the main-device keys.

Only expansion module keys can be used with multi-color.

Function keys for expansion module see hereParameter nameValue:minValue: allowed
Web-interface: Settings - Desk Phone - Events
URL Links for Events
System.Events.RegistrationSuccessed
System.Events.RegistrationFailed
System.Events.ConnectionEstablished
System.Events.ConnectionTerminated
System.Events.OffHook
System.Events.OnHook
System.Events.IncomingCall
System.Events.OutgoingCallParameter nameValue:minValue:max
Web-interface: Settings -  Web ConfiguratorDesk Phone - Local Phonebook See wiki article
Load Phonebook from URL
System.LocalPhonebook.Url
System.LocalPhonebook.UpdateTime08:00
Display
System.LocalPhonebook.Name
PhoneUI.Directory.Local.SearchAnywhere0 = No
1 = Yes
PhoneUI.Directory.Local.NameFirst0 = Surname, Name
1 = Name, Surname
Web-interface: Settings - Web Configurator
WebUI.AdminPassword
WebUI.UserPassword
WebUI.ShowPassword
WebUI.AllowAccessWeb0 = WebUI.AdminPasswordWebUI.UserPasswordWebUI.ShowPasswordWebUI.AllowAccessWeb010 = Allow access from a different subnet
1 = No access from different subnet (Default)		Parameter nameValue:minValue: allowed
Web-interface: Settings - System - Phone Web Server
HTTP Server

HTTP.ConnectionType

HTTP (Default)
HTTPS
HTTP_HTTPS

HTTP.Port1 - 65535: 80 (Default)
HTTP.SecurePort1 - 65535: 443 (Default)
WebUI.LogoutTimer1 - 60: 10 (Default)Parameter nameValue:minValue:max
Web-interface: Settings - System - Provisioning and Configuration

PhoneUI.Provisioning.ShowInProgressOnDisplay

(Parameter is not in web-interface)

0

0 = Do not show "Provisioning in Progress" on Display.

1 = Show "Provisioning in Progress" on Display. (Default)

Auto Provisioning
System.Provision.ProvisioningServerhttp://profile.gigaset.net/device/%DVID/ (Default)
Web-interface: Settings - System - Firmware Update
Firmware Update
FirmwareManagment.AutomaticCheckForUpdates1

0 = Automatic check for updates is "No"

1 = Automatic check for updates is "Yes"

System.Provision.Period

(Parameter is not in web-interface)

60086400

0 (Default) =  Random value between 1:00 and 4:00 am

Minimum time is 600 seconds.
If you configure the time <600 and > 0 then it can be that during manual testing provisioning, the
device will wait until the 600 seconds are passed and with the correct setting this
will not happen. 

Parameter nameValue:minValue:max

Maximum time is 86400 seconds

Web-interface: Settings - System - Security
System.Security.AcceptAllCertificates

0

1

0 = Accept all certificates No (Default)

1 = Accept all certificates Yes

System.Security.HTTPAuthUsername
System.Security.HTTPAuthPasswordParameter nameValue:maxValue: allowed
Web-interface: Settings - System - Date and Time
System.DateAndTime.AutoAdjustTime
NTPServiceDisabledNTPServiceEnabled

NTPServiceDisabled

NTPServiceEnabled

(Updated in the 2.22 software or higher)

NTPServiceDisabled = Setting "Local" in web-interface, time is set manually.
NTPServiceEnabled = NTP server via provisioning, if not send then use DHCP option 42
NTPServiceManual = NTP server is entered manually via the web-interface.
NTPServiceDHCP = Use DHCP option 42, if not send then use NTP server via provisioning.

System.DateAndTime.TimeServer

pool.ntp.org (Default)
System.DateAndTime.TimeZone

GMT+1.Europe/Amsterdam


Expand
titleComplete list

GMT-11.Pacific/Midway
GMT-10.Pacific/Honolulu
GMT-9.America/Anchorage
GMT-8.America/Los_Angeles
GMT-8.America/Tijuana
GMT-7.America/Phoenix
GMT-7.America/Chihuahua
GMT-7.America/Denver
GMT-6.America/Costa_Rica
GMT-6.America/Chicago
GMT-6.America/Mexico_City
GMT-6.America/Regina
GMT-5.America/Bogota
GMT-5.America/New_York
GMT-4.America/Barbados
GMT-4.America/Halifax
GMT-4.America/Manaus
GMT-3.America/Sao_Paulo
GMT-3.America/Argentina/Buenos_Aires
GMT-3.America/Godthab
GMT-3.America/Montevideo
GMT-3.America/Santiago
GMT-2.Atlantic/South_Georgia
GMT-1.Atlantic/Azores
GMT-1.Atlantic/Cape_Verde
GMT.Africa/Casablanca
GMT.Europe/London
GMT+1.Europe/Amsterdam
GMT+1.Europe/Belgrade
GMT+1.Europe/Brussels
GMT+1.Europe/Sarajevo
GMT+1.Africa/Brazzaville
GMT+1.Africa/Windhoek
GMT+2.Asia/Amman
GMT+2.Europe/Athens
GMT+2.Asia/Beirut
GMT+2.Africa/Cairo
GMT+2.Africa/Harare
GMT+2.Europe/Helsinki
GMT+2.Asia/Jerusalem
GMT+3.Asia/Baghdad
GMT+3.Asia/Kuwait
GMT+3.Europe/Minsk
GMT+3.Europe/Moscow
GMT+3.Africa/Nairobi
GMT+4.Asia/Baku
GMT+4.Asia/Dubai
GMT+4.Asia/Tbilisi
GMT+4.Asia/Yerevan
GMT+5.Asia/Karachi
GMT+5.Asia/Oral
GMT+5.Asia/Yekaterinburg
GMT+6.Asia/Almaty
GMT+7.Asia/Bangkok
GMT+7.Asia/Krasnoyarsk
GMT+8.Asia/Shanghai
GMT+8.Asia/Hong_Kong
GMT+8.Asia/Irkutsk
GMT+8.Asia/Kuala_Lumpur
GMT+8.Australia/Perth
GMT+8.Asia/Taipei
GMT+9.Asia/Seoul
GMT+9.Asia/Tokyo
GMT+9.Asia/Yakutsk
GMT+10.Australia/Brisbane
GMT+10.Pacific/Guam
GMT+10.Australia/Hobart
GMT+10.Asia/Magadan
GMT+10.Australia/Sydney
GMT+10.Asia/Vladivostok
GMT+12.Pacific/Auckland
GMT+12.Pacific/Fiji
GMT+12.Pacific/Majuro
GMT+13.Pacific/Tongatapu

System.DateAndTime.AutoAdjustClockForDST

AutomatedDaylightSavingDisabled

AutomatedDaylightSavingEnabled

AutomatedDaylightSavingDisabled

AutomatedDaylightSavingEnabled

System.DateAndTime.TimeFormat

12h

24h (Default)

System.DateAndTime.DateOrder

dd.mm.yyyy (Default)

mm.dd.yyyy

System.DateAndTime.NTPDns

Not in web-interface: Enable/disable PTR queries for NTP

NTPDnsEnabled

NTPDnsDisabled

Parameter nameValue:minValue:max

Web-interface
WebUI.Language

en-us (Default)

Expand
titleComplete list

de-de

fr-fr

es-es

it-it

nb-no

nl-nl

tr-tr

pt-pt

el-gr

da-dk

sv-se

cs-cz

pl-pl

sl-sl

ro-ro

ru-ru

hu-hu

bg-bg

hr-hr

sr-rs

sq-al

WebUI.ShowPIN0

0 = Show PIN No

1 = Show PIN Yes (Default)

PhoneUI.Security.PIN1234 (Default)Parameter nameValue:minValue: allowed
Device settings not available via web-interface
Phone UI
PhoneUI.Settings.Volume

1

- 10

: 5 (Default)

Menu - Settings - Audio - Ringtones -Volume

PhoneUI.Settings.Confirmations0

0 (Default)

Menu - Settings - Audio - Advisory Tones - Confirmations

PhoneUI.Settings.KeyClick0

0 (Default)

Menu - Settings - Audio - Advisory Tones - Key Click

PhoneUI.Settings.AnonymousCallSilencing0Menu - Settings - Audio - Ringtones - Anonymous Call Silencing
PhoneUI.Audio.ReceiverVolume1 - 10: 3 (Default)
PhoneUI.Audio.HeadsetVolume1 - 10: 3 (Default)
PhoneUI.Audio.HandsfreeVolume1 - 10: 3 (Default)
PhoneUI.SelectedServices.Disable0

0 = Show Selected Services menu in PhoneUI (Default)
1 = Hide Selected Servicesmenu in PhoneUI

Telephony.ShowKeysDisplayName0 = No
1 		0 = Do not show Function key icons
1 = Show Function key icons (Default) 		= Yes
PhoneUI.ActiveRingbacks.Disable00 = Show Active Ringbacks menu item in PhoneUI (Default)
1 = Hide Active Ringbacks menu item in PhoneUI
PhoneUI.Audio.OneMelody.Doorstation
PhoneUI.Audio.OneMelody.External
PhoneUI.Audio.OneMelody.Group
PhoneUI.Audio.OneMelody.Internal
PhoneUI.Audio.OneMelody.Optional
PhoneUI.CallDivert.Disable00 = Show Call Divert menu item in PhoneUI (Default)
1 = Hide Call Divert menu in PhoneUI
PhoneUI.CallWaiting.Disable00 = Show Call Waiting menu item in PhoneUI (Default)
1 = Hide Call Waiting menu in PhoneUI
PhoneUI.Directory.Local.NameFirst
PhoneUI.Menu.Contacts.Visible00 = Hide Contacts menu in PhoneUI
1 = Show Contacts menu in PhoneUI (Default)
PhoneUI.WithholdNumber.Disable00 = Show Withhold Number menu item in PhoneUI (Default)
1 = Hide Withhold Number menu item in PhoneUI
WEB-UI
WebUI.CallSettings.CallWaiting.Disable0

0 = Show Call waiting menu in Web-UI (Default)
1 = Hide Call waiting in Web-UI

WebUI.CallDivert.Disable1

0 = Show Call Divert menu in Web-UI (Default)
1 = Hide Call Divert menu in Web-UI

Note: It will also enable/disable the function key Call Divert.

Others
PhoneUI.Settings.DistinctiveRinging

1

0 (defaultDefault) = Show all ringtones in MMI and web-interface
0 = Hide the Distinctive ringtones (External, Internal, Group, Doorstation) in MMI and web-interface. Used when provider does not support Distinctive ringtone.

SIP.Checksync.Simple

0 (default) = Device will not reboot automatic after check-sync.
If reboot=true is send then of course device will reboot
Device will not reboot automatic after check-sync.
If reboot=true is send then of course device will reboot
1 = Device will reboot automatic after check-sync. (same behavior as reboot=true is send)
If device will receive reboot=false then also reboot will happen.

Timer 1 only provisioning is done: Device will reboot 5 seconds after downloading provisioning file

Timer 2 also firmware update is started: Device will reboot 90 seconds after firmware file is downloaded.

(Device will not allow a reboot during these 90 seconds, it waits until the 90 seconds are passed)

Calls.Missed.Subscribe.Active0

0 = inactive - Subscribe for MWI is not send to server, MWI displayed correctly
1 = active (default) - Subscribe for MWI is send to server, MWI displayed correctly

SoftKeys.X.Active

X=0 Left SoftKey, X=1 Right Softkey

0

0 = When SoftKey is FAC then change to disabled
1 = When SoftKey is FAC then change to enabled
SIP.Account.(0-3).RegistrationServer.ReregisterAlternative00 (Default) = Disabled, SIP re-REGISTER 50% of the negotiated expire timer.
1 = Enabled, SIP re-REGISTER 75% of the negotiated expire timer.
NetDir.LookupCacheValidationTime

adjustable lookup cache validation time

0 = buffer entries
1 = ask every lookup,
2 = refresh after 15min,
3 = refresh after 1h,
4 = refresh after 6h,
5 = refresh after 12h,
6 = refresh after 18h,
7 = refresh after 1day,
8 = refresh after 2days,
9 = refresh after 3days,
10 = refresh after 5days,
11 = refresh after 1week

Web-interface: Expert - Network - Switch Settings
Switch Settings
NET.SwitchSettings.EnablePortMirroringEnable port mirroring:
0 = Disabled
1 = Enabled
NETWORK.SwitchSettings.LinkSpeedDuplexLanPort

Link speed and duplex mode - LAN Port

Autonegotiation
10 Mbit Half-Duplex
10 Mbit Full-Duplex
100 Mbit Half-Duplex
100 Mbit Full-Duplex
1000 Mbit Full-Duplex

NETWORK.SwitchSettings.LinkSpeedDuplexPcPort

Link speed and duplex mode - PC Port

Autonegotiation
10 Mbit Half-Duplex
10 Mbit Full-Duplex
100 Mbit Half-Duplex
100 Mbit Full-Duplex
1000 Mbit Full-Duplex
Disabled

NET.SwitchSettings.AllowFragmentation

Allow fragmentation of frames
0 = Disabled
1 = Enabled

Web-interface: Expert - Network - DHCP Settings
DHCP Settings
NET.IP.IPv4.DHCP.Options.Disabled43, 66, 114, 120
Web-interface: Expert - Audio - Adjustment
Adjustment
Audio.Adjustment.EnableAec

Enable AEC handset mode
Yes = Enabled
No = Disabled

MIC Level TX
Audio.Adjustment.HandsetModeHandset microphone TX level 0 - 10
Audio.Adjustment.HandsFreeModeHandsfree microphone TX level 0 - 10
Audio.Adjustment.HeadsetModeHeadset microphone TX level 0 - 10
Web-interface: Expert - Debugging - System Logging
Reboot
System.QA.AutomaticReboot.Enabled

0 = Disabled

1 = Enabled

System.QA.AutomaticReboot.Weekdays

Monday = 1

Tuesday = 2

Wednesday = 4

Thursday = 8

Friday = 16

Saturday = 32

Sunday = 64

Example: 

Monday AND Friday AND Sunday = 1 + 16 + 64 = 81

System.QA.AutomaticReboot.TimeTime in the following format HH:MM
example: 15:44
System Logging
System.Syslog.RemoteLogging.EnabledActivate Remote Syslog
0 = Disabled
1 = Enabled
System.Syslog.RemoteLogging.ServerSyslog server IP address
System.Syslog.RemoteLogging.PortSyslog server port (514)
Web-interface: Expert - Debugging -Advanced Settings
System.AllowHTTPOutgoing0 = Disabled
1 = Enabled
SIP.Notify.AcceptInvalidCSeqAccept Invalid CSeq
0 = Disabled
1 = Enabled
System.Security.RemoteControl.Allow0 = Disabled
1 = Enabled
System.Security.RemoteControl.SourceRemote Control Source

System.Provision.Multicast.Allow

SIP.Multicast.Active

Active SIP Multicast
System.General.RemoveUASpecialChars

Remove special characters
0 = Disabled
1 = Enabled

System.Provision.MaxDownloadSpeedBpsFirmware update download speed limitation (Bytes per second), where 0 (zero) is no limitation.