Versions Compared

Old Version 7

changes.mady.by.user Bakker, Bas

Saved on

compared with

New Version Current

changes.mady.by.user Bakker, Bas

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Ziggo zakelijk

Section
Column
width50%

Valid for T440/T640 Firmware version 2.0.6 or higher

Feature                                                           
Outgoing CallsYes
Incoming CallsYes
CLIP incomingYes
CLIP outgoingYes
Call ForwardingYes
Call TransferYes
Call WaitingYes
DTMFYes
Anonymous CallNo*
A-number forwardingYes
Column
width30%20%

 

 

 
Column
width30%

Image Modified 

Table of Contents

 

 

Info
titleImportant

* Outgoing Anonymous calls do not work at the moment, we are working on it, as the pilot number is shown as CLIP on the receiving device.

 

Gigaset T440/T640 settings.

GatewaygroupGateway group:

In the Gigaset PBX go to "Administration" -> "Routes" -> "Gateway groups" - Enter the desired name and click on "Create new group":

Image Added

SIP Gateway

...

:

In the Gigaset PBX go to "Administration" -> "Routes" -> "SIP Gateways" - At "Gateway" enter the desired name and click on "Create new gateway":

...

Fill out the provider details:

Image Removed

Image Removed

...

Info
titleImportant

With the "Dial command" in above screenshot there is no need to dial an extra 0 for an outside line
If it is wanted to select an outgoing line with an extra 0 the "Dial command" is as following: PJSIP/{prefix}{number:1}@[gateway}

Image Added

Image Added

Info
titleImportant

Enter the advanced parameter "inband_progress=yes" in the Value field and press on the "+", the setting will be active after a reboot of the system or reload of Asterisk.

...