Versions Compared

Old Version 5

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 6

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section

Software 2.16.6, August 2017
Bug-fixes and improvements:

  • Clear State of Yes/No Switches Image Added
  • BLIND Transfer
  • Distinctive Ringing supporting bellcore ringtones
  • New option to hide/show Diversion info
  • "Select Line" softkey configurable
  • Enhanced "QuickDial" functionality
  • Push Provisioning parameters via SIP Notify

  • Call Volume settings added to PhoneUI menu (Menu/Settings/Audio Settings)

  • Faster return to Idle Screen after "Terminated Call"
  • Settings for"Default Ringtone" added to Menu
  • Display correct PHY settings on Web-UI
  • Apply provisioning parameters via SIP Notify
  • Provisioning after reboot starts seconds after show IDLE display instead of 2 minutes.
  • Contact number counter for directories
  • "Uptime" counter on Status page in Web-UI
  • [Door App] Sending DTMF tones via keypad
  • Quick dial: new call is not initialized after pressing the FK when 'Call ended' screen is still visible on the device - resolved
  • [PhoneUI] Record icon is truncate - resolved
  • [WebUi] No possibility to login to Maxwell WebUI after reboot - resolved
  • Access to empty LDAP directory - resolved
  • Entries in missed calls list starting wit 00 are changed to + - resolved
  • Expansion Module: Long names via provisioning were not set - resolved
  • XML phone-book shows "," in front of searched entries - resolved
  • Audio volume is not set immediately - resolved
  • Problem by displaying two parallel incoming calls - resolved
  • Plantronics Callisto - Bugfixes - resolved
  • Possible to save only CNIP to directory - resolved
  • Incorrect data in screensaver settings - resolved
  • Cutting first second of audio with early media scenario resolved
  • Strange message and incorrect name and number on the screen after blind transfer - resolved
  • SIP via TLS - Registration lost after update and after a while - resolved
  • After attended call transfer Maxwell does not send info "Busy here" - resolved
Section

Software 2.15.9, July 2017
Bug-fixes and improvements:

  • Initial Expansion Module support
  • Speed-up parameters fetching for WebUI in property service
  • Remove Vodafone phone system for Default variant
  • [WebUI] Decrease timeout back to 10s
  • Provisioning IDs for Russian Variant
  • FAC, possibility user to add additional number

  • [Maxwell 3] Function Keys settings on Web-UI improved

  • "No version available" pop-up for automatic firmware update
  • Network settings not stored in "AllSettings.cfg"
  • Auto provisioning via Redirect server accept XML version 1.0 and 1.1 (Direct link to XML file)
  • [Broadsoft] Session timer support
  • Message waiting subscribe optional
  • Grey out Connection ringtones where there's no active connection set up
  • "Default" value for led color configuration
  • Appearance of FK settings for Ext Mod and Phone aligned
  • Firmware Update on low bandwidth
  • Uptime Counter reorganized
  • Updated Translation Files for PhoneUI and Web-UI
  • Reset to default - improved boot-up procedure
  • SIP options support
  • Red stripe is visible on "Account not registered" screen 
  • Export empty local phonebook gives Internal server error 
  • [Broadsoft] Maxwell sends wrong credentials to server to download configuration file 
  • Factory reset Menu not shown correctly in Danish 
  • Peoplefone IOT- test case Attended Transfer After Answer 200 OK not acknowledged 
  • Door-intercom not working 
  • [LDAP] Select Line state is not reached after Off Hook
  • [Voice Mail] Icon and counter is not shown in Idle 

  • Backlight is not turning off when screensaver is on 

  • Wrong time format on screensaver 
  • Hard keys (Handsfree and Handset) rejected incoming call 
  • Maxwell basic: SIP message on screen - the first letter in the line is cut 
  • Pressing RSK 'Info' during active call freezes Maxwell 
  • [3 SIP Channels][Hybird] Putting down receiver on "Call ended" screen doesn't end a call 
  • [ACC] Action URL doesn't work for programmable keys 
  • [Call Transfer]CTBA - Non-functional key 
  • Ringing melody is played constantly
  • When provisioning DND active the DND light does not turn on 
  • [Web-UI] Error after Restore device settings from PC
  • No speechpath when iLBC codec with 30 ms packet time for RTP is selected
  • [XML phone-book] Three "Net Directories" if save empty directory name
  • Red stripe is visible after screensaver activation
  • [DHCP] Options 3,6 and 15 are requested twice by Maxwell in DHCP Request after boot up
  • Door Intercom not working
  • Date and Time is different on WebUI and PhoneUI in particular case
  • Wrong time server
  • The voicemail notification appears after a few second
  • [LDAP] Numbers are wrong displayed on Select Number screen
  • [LDAP] Can not call from Select Number screen
  • Maxwell was added to T640 / T440 black list during dummy account registration
  • No space character in display name on PhoneUI
  • Wrong icon behind "view" in the call list (redial)
  • [XML phone-book] Incorrect GET request in case of searching city
  • Voice mail counter is not shown in Messages Center
  • Function Key "Line" is not working like expected
  • [Audio Codecs] Respect codec priority set by the user
  • [LDAP] Cannot dial using additional attribute
  • Problem with speech path after switching between EHS headset and hands-free mode
  • [EHS] PTT button doesn't end a call
  • Name replacement doesn't work after call transfer
  • Ringtones "off" setting is reverted after reboot of device

...