Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Column
width70%

How to set the

Basestation

Base Station name behind a 3rd-party PBX?

Problem

The Gigaset handsets are connected on a 3rd party PBX system with DECT (GAP).
Users always see just "Base 1" in the display, instead of having their real displayname.

Solution


You need a standard Gigaset

basestation

base station for the setup. As soon as you register the handset to a 2nd

basestation

base station the "Select Base"-option will appear in the registration menu. With the softkeys you can then also change the

basestation

base station-name.

  • Register the handset behind the PABX (on the display appear Base 1)
  • Register handset on your second base station (to use only for the procedure)
    Go to: Menu --> Settings --> Registration --> Select Base
  • Your choice will be Base 1 (base where the handset is registered)
  • Here you will see the softkey to change the name of the base station
  • Do that and on the display will appear the name of the base that you have assigned

In this way you have not changed the name of the handset but the name of the

basestation

base station.

To deregister the handsets from the additional Gigaset

basestation

base station you can use the hardware reset for the

basestation

base station or the dedicated menu on the handset itself.

Column
width30%

Table of Contents