...

Important Note:
Gigaset only supports the commissioning of the SIP component of the station. Any additional questions for the assembly of the station, installation of relay or switch functions and further, or safety-relevant components is not answered by Gigaset Support (phone or e-mail). The manufacturers documentation and firmware must be confirmed directly by Baudisch. For more information, please visit the manufacturer web site (see below) or the manufacturer's documentation.

Image Added   

Conceptual and preparation of Gigaset PBX

...

Image Removed

Image Added

• The SIP phone is now assigned to a dedicated user. This can be named as desired, e.g. First name: Door; Name: Entrance
  • The telephone-numbers of the user also allow calls to this station. This must be unlocked separately in the station.
  • By the user-assignment the doorstation get the right to make external calls.
  • It is recommended for those users to deactivate the right "Phone Log".

Image Removed

Image Added

Image Modified

• The Baudisch SIP intercom calls internal or external numbers when pressing the ringing-button.
  • In general, the target should be a group (Group Strategy: Ring All), in the example with group number 199.
  • All participants in this group of the Gigaset PBX are notified accordingly if the ringing-button on the Baudisch SIP doorstation is pressed.
  • Note: The combination with a module 'Group with Waiting-queue' is currently not supported.

Image Added

Image Added

Image Added

Configuring SIP station

Important Note:
Please follow carefully the instructions of the manufacturer's documentation for setup. Please also note that you must save the setting changes separately on each page.

...

• Central phone (display text)
  • Name: Idle-display on the bell display in three rows, for example Line 1: Gigaset Communications, line 2: Please ring the bell!
  • Number: Destination number when you press the bell, in the example, the group number 199
  • DTMF code: 4-digit code to trigger a function
  • Incoming: Reject
  • Relay: On
  • Group ID: None

Image Removed

Image Added

Image Modified

VoIP settings

• CODECs
  • Codec 1: PCMA
  • Codec 2: PCMU
  • Codec 2-6: None 
• SIP settings
  • SIP Registration: [x] Yes
  • SIP Server: <Gigaset-IP>
  • SIP server port: 5060
  • SIP Domain: <Gigaset-IP>
  • SIP outbound proxy server: [x] No
  • Use DNS SRV: [x] No
  • SIP User ID: <SIP-Telefon-Name>
  • SIP authentication ID: <SIP-Telephone-Name>
  • SIP authentication PIN: <SIP-Telephone-Passwort>
  • Username: <SIP-Telephone-Name>

Image Removed

Image Added

Image Modified

• Advanced SIP Settings
  • Send DTMF: RFC2833
  • Support PRACK (RFC3262): [x] no
  • Please leave the other values at their default settings
• System
  • Syslog Server IP: <Gigaset-IP> (please use only in case of support)
  • SNTP Server: <Gigaset-IP>
  • Time zone: GMT +01:00
  • Clock adjust: [x] yes

 

Hardware settings

Please make the settings according to the manufacturer's instructions and the requirements on site.

Configuration of CP-CAM

Important Note:
Please follow carefully the instructions of the manufacturer's documentation for setup.

In combination with the Gigaset PBX, the CP-CAM must be operated with a fixed IP address - either by a fixed configuration in the device or via a static lease in the DHCP server.

Configuration actions

• Settings --> Camera
  • Mode: QVGA (320 x 240)
  • Number of frames per second (sensor): 15
  • Displayed images (video): Each 2nd

• If necessary change other settings to your requirements.

...

• Manufacturer's documentation is available on the Baudisch website : http://www.baudisch.de/downloads#anleitungen (password: SIP-hightech)
• Manufacturers package to download: available below here!

Sample Images

Sample images for demonstration purposes

...