Due to planned upgrade JIRA/Confluence may not be available on 6th November 2021 from 9am to 5pm CEST,
In case of any questions please don't hesitate to contact helpdesk@gigaset-devnet.pl

Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

You can define your own dialling plans in the Dialling plans area on the Web page: Settings - Telephony - Dialling Plans

You can specify the following Dialling Plans:

  • You can define a connection for specific phone numbers, which is always to be used to dial these numbers.
  • Define if the number is to be dialed with the area code.


Info

If dialling plans overlap, the one with the greatest concordance will apply.

Example:

There is a dialling plan for the number "02" and the one for number "023". If you dial "0231.." the second plan will apply, if you dial "0208..." the first plan will apply.



Example
Area Code

CountryGermany



InternationalPrefix00



Area Code49


LocalPrefix0



Area Code287191

Dialling Plans
Phone numberUse area codeConnectionCommentNumberOutgoing INVITE
89IP 1Bocholt Office89999004928719189999 via IP 1
86
IP 1Bocholt Local8600086000 via IP 1
87
IP 2Test8700087000 via IP 2
891IP 2Test289199004928719189199 via IP 2
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleAuto provisioning
Parameter nameDescription
Telephony.DiallingPlans.List.0-19.Number
Telephony.DiallingPlans.List.0-19.UseAreaCode0 = Disabled
1 = Enabled
Telephony.DiallingPlans.List.0-19.Connection
Telephony.DiallingPlans.List.0-19.Comment
Telephony.DiallingPlans.List.0-19.Active0 = Disabled
1 = Enabled
Telephony.CallBarring.List.0-19.Number
Telephony.CallBarring.List.0-19.Comment
Telephony.CallBarring.List.0-19.Blocked0 = Disabled
1 = Enabled

Example:

<param name="Telephony.DiallingPlans.List.0.Active" value="0"/>
<param name="Telephony.DiallingPlans.List.0.Comment" value=""/>
<param name="Telephony.DiallingPlans.List.0.Connection" value="0"/>
<param name="Telephony.DiallingPlans.List.0.Number" value=""/>
<param name="Telephony.DiallingPlans.List.0.UseAreaCode" value="0"/>