Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

With releasing the Integrator for Large and Enterprise solutions, we also released the Licenses described below. The license page is only available in the web-interface of the Virtual Integrator and when the N870 has the role Integrator only.

The following Licenses are available.


LicenseOrder number
N870 Virtual Integrator software LicenseS30852-H2716-X1

Multicell DECT manager License

  • N870 DECT Manager
  • N670 with multi-cell License
S30852-H2716-X2
N670 DECT Manager licenseS30852-H2714-X2

N670 upgrade to multi cell license

This license has no grace period

S30852-H2714-X1


The Integrator is available in 2 versions.

  1. N870 in Integrator only mode
  2. N870 Virtual Integrator software

The License is based on the N870 hardware MAC address.

How to add a License.

  1. Define the Master DECT Manager (Only when using the N870 Virtual Integrator software)
  2. Download the “License Request File” from the N870 License page

  3. For our Resellers: Send the “LRF”, the “License Order-Number” and the “Quantity” of required licenses to your distributor
  4. For our Distributors: Send the “LRF”, the “License Order-Number” and the “Quantity” of required licenses to GC Order Management ORDERS-PRO@gigaset.com
  5. The “License Activation File”, received back from GC-OM must be uploaded on the N870 License page to activate the requested licenses.

    Note: Only when using the N870 Virtual Integrator software a Master DECT Manager must be defined first!


Grace period meaning and consequences

The N870 has a grace period build in.

  • An installation can be tested for 35 days without any limitation and any purchased license

a. After first startup

b. After each full factory reset

  • After 35 days the message "Check License status“ will be shown on all installed DECT handset, for additional 35 days (day 36 – 70 after first startup/factory reset)
  • Also a license error message will be shown in the N870 web-interface.
  • But, the system will stay fully functional.
  • After a total number of 70 days after first startup/factory reset the number of parallel calls will be reduced to 1 call per connected DECT manager, unless a valid license file will be uploaded into the N870


Service.

If the license is not valid anymore due to:

  • Master DECT manager is broken and is replaced, therefore the license is not valid anymore.

You will have 1 Month to request a new License file, see the grace period.


Info

Today, the license file procedure is a manual procedure. The online process is under development.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleMaster DECT manager
Section

Only needed when the Virtual Integrator is used.

As the license is based on the N870 MAC address and the Virtual Integrator is not an N870 device, you need to define the Master DECT manager.

In the Integrator web-interface go to SETTINGS - DECT manager - Administration - Global settings

Select the Master DECT Manager.

Info

The Master DECT manager need to be installed, connected and working as the real MAC address of this device is retrieved.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleDownload the License file

To request a new License, you first need to download the request file from the device. 

The request file contains basic information about the system like:

  • Hardware information (MAC address of Master DECT manager)
  • Software version
  • Number of connected DECT managers / Base stations / handsets
  • Enabled licenses
  • Country selection
  • Data and time
  • Provider / profile name

The file content is encrypted.

In the Integrator web-interface go to SETTINGS - System - Licensing - Create Request File

The License request file is downloaded.

(Screenshot is from an N870 switched to Integrator only mode)

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleBuy a License using the license file

To request a new license you need to add this file to your purchase order.

You will receive from Gigaset a License file.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleUpload the new License

In the Integrator web-interface go to SETTINGS - System - Licensing - Licence - Browse 

Select the License file you received from Gigaset.

Click Upload

Your license is now enabled.