You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

MCS VoIP GSM gateway

Tested with:
Gigaset T300/T500 PRO: Software version 4.6.5.0
MCS VoIP GSM Gateway AS551/2V: Software version 3.04100215


MCS Software version 3.10 is not working, use 3.11 instead.


In this example we started with a default MCS Gateway where we added a SIM card and the PIN code needed to activate the SIM card.

 

Settings in the MCS VoIP GSM Gateway

Goto: Configuration - LAN settings - LAN interface mode

The Device should have a fixed IP address.
Settings are dependent of the customers network.

MCS LANmode.jpg

Goto: Configuration - SIP access - General

Change the SIP operation mode to SIP peer

MCS SIPaccess.jpg


Goto: Configuration - SIP access - Names and passwords

Change the Peer IP address to IP address of the Gigaset T300/T500

MCS names password.jpg

Goto: Configuration - SIP access - DTMF processing

Enable the option: Convert telephone-event from LAN (RFC2833/4733) to DTMF tones to GSM

This will enable you to use DTMF tones when you called a Interactive Voice Response system.

MCS DTMF.jpg

Goto: Configuration - SIP access - Codecs

Check if G711 A-law/PCMA is selected as the first protocol.

MCS codecs.jpg

Goto: Configuration - Wired Access - Country specific settings

 

Check if the country settings are correct.

MCS Wiredinterface.jpg

Goto: Configuration - GSM settings - GSM channels

MCS gsmchannels.jpg

Change the settings Fix subscriber number, this number is dialled when a GSM call is coming in. In the Gigaset T300/T500, this is the external number that is configured for the MCS Gateway and given to a user or a group.

Settings in the Gigaset T300/T500

 

MCS AS551.jpg

 

 

  • No labels