You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Introduction

The Functions key can be assigned a function of your choice:

  • QuickDial
  • Send key
  • Alarm key (Software version 10 or higher is needed)
  • LED torch (R700H)

Quickdial

The phone number assigned to the key is dialed.

Send Key

A phone number previously entered from the keypad (or selected in a call list or the directory) is dialed.

Alarm key

Via short and or long press an configured alarm number is dialed. With an optional delay signaled via an ringtone.

Configuration

The function key can be configured via:

  • Press the function key (When not configured)
  • Handset Menu - Settings - Display & Keypad - Feature key


Fieldpossible valuesSend keyQuick DialAlarmTorch (R700H)Comment
Activation:<on / off>√√√√
Function:<function selector>√√√√
Keypad locked:<key (in-/)active>
√√√
Audio channel: (Via)<Earpiece / Handsfree>
√√
only if "call" in use
LED signal: (blinking)<on / off>

√
R700H only
Call to:(number)
√


Alarm Key SP:

<On/Off>

√

Alarm Dest. SP: (Call to)

(number)

√
hidden if Alarm key SP = off

Prealarm Time: (Alarm delay)

<0, 5, 10, 15, 30> s.

√
hidden if Alarm key SP = off
Melody:<melody selector>

√
 hidden if time = 0
Volume:<volume editor>

√
 hidden if time = 0

Alarm Key LP:

<On/Off>

√

Alarm Dest. LP: (Call to)

(number)

√
hidden if Alarm key LP = off

Prealarm Time: (Alarm delay)

<0, 5, 10, 15, 30> s.

√
hidden if Alarm key LP = off
Melody:<melody selector>

√
 hidden if time = 0
Volume:<volume editor>

√
 hidden if time = 0
Feature key PIN:(PIN Editor)√√√√
PIN protection

The Feature key configuration can be protected with a PIN code. The PIN is separate from the handset PIN. Entrance to the PIN setting is inside Function key configuration. PIN setting is visible as last field (Display_1)

Rules for PIN protection:

  • Default PIN is: No PIN - field is empty,
  • If there is no PIN, it is possible to visit configuration of the feature key without validating the access,
  • An empty PIN field is valid and allowed setting at saving,
  • Entered digits are visible,
  • PIN length: minimum is 4 digits, maximum is 8 digits,

Display_1

Display_2

  • No labels